All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
SparkFun Buck Regulator Breakout - 5V (AP63357)
SKU: SF-COM-21255 | Brand: SparkFun
The SparkFun 5V Buck Regulator Breakout features the AP63357 from Diodes Inc., a 3.5A synchronous buck converter with a wide input voltage range of 3.8V to 32V. The fully integrated 74mΩ high-side power MOSFET/40m...
Delivered by Tue 23 Jun
Gravity: BLE Sensor Beacon Pack (5 PCS)
SKU: DF-TEL0149 | Brand: DFRobot
Note: Gravity: BLE sensor beacons need to be configured using the 3.3V USB-TTL tool. This Gravity wireless BLE Sensor Beacon with built-in 11-bit ADC is capable of collecting data from digital and analog sensors a...
Delivered by Fri 12 Jun
DC-DC Charge Discharge Integrated Module (5V/2A)
SKU: DF-DFR1026 | Brand: DFRobot
This is a DC charging and discharging integrated module, with 5V normally open output, which is not affected by load access and has a maximum load current of 2A. It features 4 levels of charge/discharge electricity in...
Delivered by Tue 23 Jun
I2C RGB Backlight LCD 16x2 Display Module for Arduino (RGB Text)
SKU: DF-DFR0936 | Brand: DFRobot
This shield with a 16×2 RGB LCD screen could bring you a brand-new experience with an LCD screen!The RGB LCD shield extends all IOs of Arduino UNO on the back, by which you can connect with modules like sensors, LEDs,...
Delivered by Fri 12 Jun
SparkFun Level Shifter - 8 Channel (TXS01018E)
SKU: SF-BOB-19626 | Brand: SparkFun
The SparkFun 8 Channel Level Shifter Breakout features the TXS01018E™ 8-bit, bi-directional logic level translator from Texas Instruments. This board allows you to easily shift logic between devices running at diff...
Delivered by Tue 23 Jun
Adafruit Ultimate GPS Breakout with GLONASS + GPS - PA1616D
SKU: AF-5440 | Brand: Adafruit
The Adafruit Ultimate GPS Breakout with GLONASS + GPS is an enhanced version of the popular Ultimate GPS, built around the MTK3333 chipset with PA1616D module. It supports both GPS and GLONASS satellite networks, trac...
Delivered by Thu 2 Jul
Adafruit TSC2007 I2C Resistive Touch Screen Controller
SKU: AF-5423 | Brand: Adafruit
The Adafruit TSC2007 is an I2C resistive touch screen controller that offloads touch reading from your microcontroller. Instead of using multiple analog pins and constant polling, the TSC2007 handles all the touch sen...
Delivered by Thu 2 Jul
SparkFun Analog MEMS Microphone Breakout - SPH8878LR5H-1
SKU: SF-BOB-19389 | Brand: SparkFun
The SparkFun Analog MEMS Microphone Breakout makes it easy to work with the SPH8878LR5H-1 analog microphone from Knowles. This board features an OpAmp to bring the output of the microphone to a usable level, allowing ...
Delivered by Fri 12 Jun
Fermion: Multifunctional Environmental Sensor (Breakout)
SKU: DF-SEN0500 | Brand: DFRobot
This compact multifunctional environmental sensor combines four professional sensor chips into a single breakout board: SHTC3 (temperature and humidity), BMP280 (barometric pressure), VEML7700 (ambient light), and ML8...
Delivered by Tue 23 Jun
RS485 Wind Direction Transmitter
SKU: DF-SEN0482 | Brand: DFRobot
The wind direction sensor is a professional meteorological instrument used to measure horizontal wind direction. It integrates a hall sensor inside. The shell and weather vane is made of aluminum alloy material and us...
Delivered by Tue 23 Jun
IO Expansion Hat for Raspberry Pi 3/4/400
SKU: DF-DFR0828 | Brand: DFRobot
When making Raspberry Pi projects or learning to use Raspberry Pi for python programming, we may often need to check its Pinout Table to find out the BCM and WiringPi code corresponding to the related GPIOs, which is ...
Delivered by Fri 12 Jun
USB Type A Plug Breakout Cable with Premium Female Jumpers
SKU: AF-4448 | Brand: Adafruit
If you'd like to connect a USB-capable chip to your USB host, this cable will make the task very simple. There is no converter chip in this cable! Its basically a plain USB cable that's cut in half and with jumper ...
Delivered by Thu 2 Jul
DIN Rail 2x20 IDC to Terminal Block Adapter Breakout
SKU: AF-4437 | Brand: Adafruit
This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. You connect a 2x20 IDC cable to this very PCB, which ca...
Delivered by Thu 2 Jul
Adafruit MiniBoost 5V @ 1A - TPS61023
SKU: AF-4654 | Brand: Adafruit
The Adafruit MiniBoost 5V @ 1A is a compact inductor-based boost converter that delivers up to 1 A of regulated 5 V output from a 2–5 V input. About the size of a linear regulator, it's perfect for powering microcontr...
Delivered by Thu 2 Jul
Gravity: Active Isolated RS485 to UART Signal Adapter Module
SKU: DF-DFR0845 | Brand: DFRobot
This active, isolated RS485 to UART signal transfer module comes with protection circuits such as power isolation and TVS. Compatible with most main controllers, it has the characteristics of fast communication ...
Delivered by Tue 23 Jun
ESP32-C3 Mini Development Board
SKU: SF-WRL-18036 | Brand: SparkFun
The ESP32-C3 Mini Development Board is an entry-level development board based on ESP32-C3-MINI-1, a module named for its small size. This board integrates complete Wi-Fi and Bluetooth® LE functions. Most of the I/O pi...
Delivered by Tue 23 Jun
Humidity and Temperature Sensor - DHT20
SKU: SF-SEN-18364 | Brand: SparkFun
The DHT20 is a factory-calibrated digital humidity and temperature sensor with an I²C interface. An upgrade to the popular DHT11/DHT22 series, it provides reliable environmental measurements without requiring addition...
Delivered by Fri 12 Jun
ESP32-S2-WROOM WiFi Module Based on ESP32-S2 Chip with PCB Antenna
SKU: EC-DPI32110W | Brand: Elecrow
ESP32-S2-WROVER and ESP32-S2-WROVER-I use ESP32-S2 chip. The ESP32-S2 chip is equipped with an Xtensa® 32-bit LX7 single-core processor with a working frequency of up to 240 MHz. The user can turn off the power of the...
Delivered by Fri 26 Jun
Ambient Light Sensor(0-200klx)
SKU: DF-SEN0390 | Brand: DFRobot
A high-precision ambient light sensor housed in a transparent semisphere case for optimal light-gathering performance. With a wide 0–200 klx detection range and I2C communication, this sensor is ideal for applications...
Delivered by Fri 12 Jun
EasyESP-1: An ESP8266 experimenter board for beginners
SKU: EC-CDE82664E | Brand: Elecrow
The EasyESP-1 is a beginner-friendly development board for the ESP8266 Wi-Fi microcontroller, based on the ESP-12E module. It includes an onboard USB-to-serial converter (CP2102) so you can program and debug directly ...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
