All Products

SKU: PL-1696 | Brand: Pololu

This force-sensing resistor (FSR) from Interlink Electronics is a passive component that exhibits a decrease in resistance when there is an increase in the force applied to the 0.58″-diameter (1.5 cm) active area...

SKU: PL-2458 | Brand: Pololu

The QTR-1A reflectance sensor carries a single infrared LED and phototransistor pair in an inexpensive, tiny 0.5" x 0.3" module that can be mounted almost anywhere and is great for edge detection and line fo...

SKU: PL-2453 | Brand: Pololu

A compact carrier board for the Allegro ACS711EX Hall effect-based linear current sensor with overcurrent fault output. It measures bidirectional current up to ±31 A with a proportional analogue voltage output centred...

SKU: AF-3319 | Brand: Adafruit

Make your next audio input/output project in a box with this handy Panel Mount Stereo Audio Extension Cable - 1/8" / 3.5mm. OK its quite a mouthful, but its pretty simple: that headphone or microphone jack you know...

SKU: AF-5755 | Brand: Adafruit

If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin connector, this cable will do the trick. It has a 1mm pitch JST S...

SKU: AF-5628 | Brand: Adafruit

A compact, self-centering analogue thumbstick with a feel and size similar to Nintendo Joy-Con joysticks. It uses two 10kΩ potentiometers (one for each axis) to provide proportional X/Y analogue output, plus a centre-...

SKU: EC-ELE18713S | Brand: Elecrow

This upgraded starter kit is the most economical way to start Arduino programming for those beginners who are interested. It’s the most economical way to start learning Arduino programming and electronics.Features 100...

SKU: EC-ELE18712S | Brand: Elecrow

A comprehensive Arduino starter kit packed with over 200 components, sensors, and modules. Everything comes pre-soldered and ready to wire up, making it ideal for beginners learning electronics and programming. Built...

SKU: AF-4471 | Brand: Adafruit

The Adafruit MCP2221A Breakout lets your computer talk directly to I2C devices, sensors, and GPIO — no microcontroller required. Drive an OLED display, read a colour sensor, flash LEDs, or read buttons straight from P...

SKU: AF-4333 | Brand: Adafruit

The Circuit Playground Bluefruit builds on the popular Circuit Playground Express by upgrading to an nRF52840 microcontroller with built-in Bluetooth Low Energy. The round board is packed with sensors, LEDs, and input...

SKU: AF-1752 | Brand: Adafruit

A compact Class D stereo amplifier breakout based on the Maxim MAX9744. It drives two channels of 4–8 Ω speakers at up to 20 W each, powered from 4.5–14 V DC. With up to 93% efficiency, it runs cool without heatsinks ...

SKU: AF-2349 | Brand: Adafruit

This Reflective IR Sensor is a simple plastic casing with two elements - an IR LED and an IR phototransistor. You can control the IR LED and turn it on to bounce IR off objects to determine their reflectivity. White &...

SKU: AF-1447 | Brand: Adafruit

Standard HD44780 LCDs are useful for creating standalone projects.  This product is similar to our Standard LCD 16x2 display but comes with the header soldered on! 16 characters wide, 2 rows White text on blu...

SKU: SF-SEN-08679 | Brand: SparkFun

A thin, flexible membrane potentiometer that senses finger or stylus position along a 200 mm strip. Pressing anywhere on the strip varies resistance linearly from 100 Ω to 10 kΩ, providing accurate positional data for...

SKU: EC-ELE18714S | Brand: Elecrow

A complete beginner's kit for getting started with Arduino. Built around the UNO R3 development board, this kit bundles everything you need for your first electronics and programming projects — LEDs, resistors, a brea...

SKU: AF-4534 | Brand: Adafruit

The Bonsai Buckaroo is a compact add-on board for micro:bit and Adafruit CLUE that turns your board into a plant care monitoring and watering system. Bolt it on with 5 screws to get a buzzer, motor driver, and soil mo...

SKU: AF-5312 | Brand: Adafruit

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This version is e...

SKU: AF-4881 | Brand: Adafruit

Here is a jolly cute, palm-sized, Bluetooth-enabled sensor to monitor your room's temperature and humidity. Only 43mm x 43mm, we dig its small form factor and minimal design. The shell is made of durable ABS&nbsp...

SKU: EC-AK55865RF | Brand: Elecrow

The Leaper Upgraded Learning Kit is a comprehensive Arduino starter kit that includes advanced modules such as an RFID reader, stepper motor driver, real-time clock, and a wide range of sensors and components. Built a...

SKU: AF-4493 | Brand: Adafruit

For the easiest way possible to measure twists, turn to this STEMMA potentiometer breakout (ha!). This plug-n-play pot comes with a JST-PH 2mm connector and a matching  JST PH 3-Pin to Male Header Cables - 200mm,...