All Products

SKU: AF-2479 | Brand: Adafruit

The Adafruit Bluefruit LE UART Friend adds Bluetooth Low Energy connectivity to any microcontroller or computer with a hardware or software serial port. With hardware flow control built in, you won't lose data during ...

SKU: AF-2458 | Brand: Adafruit

Doesn't this fixture clamp look like a character in a Pixar movie?  If you just drew two little eyes on it then you could just imagine it hopping around on nifty, adorable little adventures that ar...

SKU: AF-2542 | Brand: Adafruit

The Adafruit FONA 808 combines 2G cellular connectivity with integrated GPS tracking in a compact 1.75 × 1.6-inch breakout. Built around the SIM808 module with an MT3337 GPS chipset, it provides voice calling, SMS, GP...

SKU: DF-SEN0233 | Brand: DFRobot

A multifunction air quality monitor that measures particulate matter (PM2.5), formaldehyde concentration, temperature, and humidity. It uses laser scattering to detect suspended particles in the air, an electrochemica...

SKU: PL-2508 | Brand: Pololu

This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly to the chassis’s battery terminals and motors, and the Arduino plugs into ...

SKU: AF-1902 | Brand: Adafruit

The SmartLED Shield (V4) provides a simple, solder-free way to connect a Teensy 3.2, Teensy 3.5, or Teensy 3.6 to HUB75 RGB LED Matrix Panels. Just plug in your Teensy, connect your panel, and start displaying graphic...

SKU: DF-DFR0130-R | Brand: DFRobot

This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading st...

SKU: DF-DFR0489 | Brand: DFRobot

DFRobot FireBeetle is a series of low-power-consumption development hardware designed for Internet of Things (IoT). Firebeetle ESP8266 is a development board integrated with IoT WiFi, TCP/IP, 32-bit MCU, 10-bit ADC an...

SKU: DF-DFR0031-Y | Brand: DFRobot

The Digital Piranha LED Module (Yellow) is a bright LED module designed for Arduino and compatible microcontroller boards. Control it via a digital pin (LOW = on, HIGH = off) or use PWM output to adjust brightness for...

SKU: PL-1587 | Brand: Pololu

A low-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gearb...

SKU: DF-DFR0141 | Brand: DFRobot

The Rainbow LED Ring V3 features 12 individually addressable SMD RGB LEDs arranged in a ring, each controllable for brightness and colour. It comes with a pre-loaded bootloader containing several built-in LED animatio...

SKU: DF-DFR0021-R | Brand: DFRobot

A simple red LED module with a Gravity 3-pin digital interface for plug-and-play connection to Arduino and other microcontrollers via a Gravity IO Expansion Shield. Ideal for beginners learning digital output control....

SKU: PL-1576 | Brand: Pololu

A high-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gear...

SKU: PL-2481 | Brand: Pololu

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5L...

SKU: DF-FIT0139 | Brand: DFRobot

These nuts can be used to install your circuit boards, sensors and mechanical mountings. The wide flange at one end with an uneven surface eliminates the need for using extra washers to keep the nut tightly secur...

SKU: SF-PRT-14411 | Brand: SparkFun

The SparkFun LiPo Charger/Booster is a compact board that charges a single-cell lithium polymer battery and boosts its output to a regulated 5V at up to 1A. Built around the MCP73831 charge controller and PAM2401 boos...

SKU: DF-DFR0162 | Brand: DFRobot

This is Version 2.0 of the Xboard. The main improvement is that it now operates at 5V, making it compatible with most sensors and I2C protocol without the need of a voltage level converter. The XBoard is a...

SKU: TB-TH1874 | Brand: Little Bird

Educational magnets. Ideal for hobbyists & children to learn more about magnetism. Each end is marked with "N" or "S". Specifications Type Childrens Expiremental Shape Rectangular Poles Marked Has mou...

SKU: PL-2454 | Brand: Pololu

The QTR-L-1A reflectance sensor incorporates a right-angle infrared LED and a right-angle phototransistor in an inexpensive, tiny 0.35″ × 0.3″ module that can be mounted almost anywhere and is great for e...

SKU: SF-PRT-14321 | Brand: SparkFun

A standard 1×12 female header designed for the Particle Photon and Photon ProtoShield boards. Add reliable, stackable connectivity to your next Photon project with this 0.1" (2.54mm) pitch header. While designed for ...