All Products

SKU: PL-2706 | Brand: Pololu

This single-row, 6-pin right-angle female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. The right-angle orientation routes connections parallel to the board surface, making it id...

SKU: PL-2708 | Brand: Pololu

The 0.100″ (2.54 mm) 1×8-Pin Right-Angle Female Header provides a reliable perpendicular connection point for standard 0.1″ pitch male headers. Its right-angle orientation is ideal for low-profile builds or board-edge...

SKU: PL-2669 | Brand: Pololu

This triple-row, 120-pin (3×40) right-angle male header strip with 0.1" (2.54mm) pitch is a versatile connector for electronics projects. The breakaway design lets you snap or cut it into any triple-row length you nee...

SKU: AF-2378 | Brand: Adafruit

The Arduino Pro Mini is SparkFun's minimal design approach to Arduino.  It's essentially a 5v Arduino that runs an 16 MHz bootloader on a super small, super thin board.  There are no connectors attached -...

SKU: AF-1839 | Brand: Adafruit

Making Wearables with an Arduino-Compatible Electronics PlatformThis book introduces readers to building wearable electronics projects using Adafruit's tiny FLORA board: at 4.4 grams, and only 1.75 inches in diameter...

SKU: PL-2578 | Brand: Pololu

This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This high-brightness version draws an average of 16 mA at 5&...

SKU: DF-SEN0014 | Brand: DFRobot

The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than o...

SKU: PL-1634 | Brand: Pololu

The MQ-3 is a semiconductor gas sensor that detects alcohol vapour at concentrations from 0.04 mg/L to 4 mg/L — a range suitable for building a breathalyser. It provides a simple analog voltage output that requires on...

SKU: DF-FIT0099 | Brand: DFRobot

A prototyping board is one of the main steps in hardware development, also called a perf board. Breadboard, wiring and punching in chips, resistors and leds is probably the first step. While this is good to confirm a...

SKU: PL-2510 | Brand: Pololu

Overview A Zumo robot preparing to attack a Parallax SumoBot. Zumo Robot for Arduino, v1.2. This Zumo robot is a low-profile tracked robot platform intended for use with an Arduino (or compatible device, such...

SKU: DF-FIT0108 | Brand: DFRobot

A solder-tail DB9 male connector for serial communication interfaces including RS-232, RS-422, and RS-485. This is one of the most widely used connectors for serial data links in industrial, embedded, and legacy compu...

SKU: PL-1595 | Brand: Pololu

A 1000:1 micro metal gearmotor from Pololu's popular N20-size range, featuring a high-power (HP) 6V brushed DC motor with precious metal brushes. With the highest gear ratio available in this series, it delivers extre...

SKU: DF-KIT0130 | Brand: DFRobot

micro:bit is a pocket-sized microcontroller designed for kids and beginners learning how to program, letting them easily bring ideas into DIY digital games, interactive projects and robotics.micro:bit comes with a var...

SKU: PL-2490 | Brand: Pololu

This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away. The VL53L0X uses time-of-flight measurements of infrared pulses for rangi...

SKU: DF-FIT0140 | Brand: DFRobot

These are two pin jumpers (also called shunts) that will create an electrical connection for the 2.54mm(0.1") male pin headers. Commonly used to modify settings on a board or device. APPLICATIONS Jumpering pi...

SKU: DF-DFR0126 | Brand: DFRobot

This Audio Analyzer module features the MSGEQ7 graphic equalizer display filter.It will give your arduino ears. Sound is broken down into seven frequency bands and the peak level for each band can be read. The seven ...

SKU: DF-FIT0148 | Brand: DFRobot

This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units). They work with wires ranging from 28 to 26 AWG. SPECIFICATIONS 2-pin 2.0mm mating connector housing 28-26 AWG crim...

SKU: DF-DFR0009-BP | Brand: DFRobot

This is the back panel pcb of 1602 Arduino LCD Shield. This shield allows you to place your own LCD onto this shield. It only requieres a 16x2 HD44780 compatible LCD. This Shield uses Arudino LCD4Bit library. ...

SKU: SF-SEN-14348 | Brand: SparkFun

The SparkFun CCS811/BME280 Environmental Combo Breakout takes care of all your atmospheric-quality sensing needs with the popular CCS811 and BME280 ICs. This unique breakout provides a variety of environmental data, i...

SKU: DF-SEN0097 | Brand: DFRobot

This is a BH1750 light intensity sensor breakout board with a 16 bit AD converter built-in which can directly output a digital signal, there is no need for complicated calculations. This is a more acurate and easier ...