Adafruit

SKU: AF-353 | Brand: Adafruit

A high-capacity 3.7 V lithium-ion battery pack built from three 2200 mAh 18650 cells connected in parallel, providing 6600 mAh of total capacity. The cells are spot-welded to a built-in protection circuit that guards ...

SKU: AF-711 | Brand: Adafruit

A standard 130-size DC hobby motor with a wider operating range than typical toy motors: 4.5–9V DC instead of the usual 1.5–4.5V. This makes it ideal for Arduino and motor shield projects where 5V or 9V is readily ava...

SKU: AF-4752 | Brand: Adafruit

Proudly show off your love for the one and only, Raspberry Pi!  This is the official (and approved by the foundation) Raspberry Pi® enamel pin for use with educators, classrooms, workshops, Maker Faires, Te...

SKU: AF-4682 | Brand: Adafruit

The Adafruit Micro SD SPI or SDIO Card Breakout Board gives you fast microSD card access using either standard SPI or the higher-speed SDIO protocol. Unlike SPI-only breakouts, this board exposes the full SDIO bus wit...

SKU: AF-5583 | Brand: Adafruit

These Socket Headers alone are, well, lonely. But pair them with the Raspberry Pi Pico, and you're in business!Socket headers are like the duct tape of electronics. They're great for connecting things, ...

SKU: AF-4424 | Brand: Adafruit

A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the...

SKU: AF-2223 | Brand: Adafruit

Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins.  The female header part is about 8.5mm tall, good for small HATs that do not to clear t...

SKU: AF-2028 | Brand: Adafruit

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2,Pi 3! (Any Pi with 2x20 connector)The Raspberry Pi has landed on the Maker World like a 40...

SKU: AF-5384 | Brand: Adafruit

This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latchi...

SKU: AF-2130 | Brand: Adafruit

The Adafruit Mono 2.5W Class D Audio Amplifier delivers powerful sound from a tiny package. Based on the PAM8302 chip, it drives 4–8 ohm speakers at up to 2.5 W with over 90% efficiency — making it ideal for portable ...

SKU: AF-4823 | Brand: Adafruit

A 150mm (6″) GPIO extension cable for Raspberry Pi models with a 2×20 pin header. Extends all 40 GPIO pins between your Pi and a HAT, Bonnet, pHAT, or other accessory, allowing you to mount add-ons away from the board...

SKU: AF-1119 | Brand: Adafruit

Medium-sized tactile momentary push-button switches for PCB mounting. The pins are normally open and momentarily close when the button is pressed. Also usable on solderless breadboards. Specifications Type – Moment...

SKU: AF-5450 | Brand: Adafruit

This cable will let you get rid of all those wall adapters you have stashed in the plastic bin in the basement. Instead of multiple wall warts with different power and current capabilities, this cable will convert any...

SKU: AF-5302 | Brand: Adafruit

The Adafruit KB2040 is an RP2040-powered board designed specifically for mechanical keyboard builds, in the Arduino Pro Micro form factor. With castellated pads, USB-C, 8 MB of Flash, and a STEMMA QT / Qwiic connector...

SKU: AF-291 | Brand: Adafruit

 The classic 'third hand tool,' as seen on every desk! We have one next to our Panavise jr, they complement each other well. This tool is good for holding small PCBs and wires for tinning or soldering to parts...

SKU: AF-3221 | Brand: Adafruit

This or that, one or the other, perhaps or perhaps not! So hard to make decisions these days without feeling like you're just going back and forth constantly. Deciding whether or not to use this mini toggle swit...

SKU: AF-4090 | Brand: Adafruit

The Adafruit USB C Breakout Board (Downstream Connection) gives you easy access to all the pins on a USB Type-C connector, configured for downstream device use. Two 5.1K resistors on the CC1 pins signal the upstream h...

SKU: AF-4236 | Brand: Adafruit

A 3.7 V lithium-ion polymer (LiPo) battery with 420 mAh capacity (approximately 1.55 Wh). It features a short cable with a genuine 2-pin JST-PH connector that clicks smoothly into matching JST jacks without snagging. ...

SKU: AF-5820 | Brand: Adafruit

This 500mm long camera cable is specifically designed to work with the Raspberry Pi 5 series. Just plug it into your Pi 5's camera port and then the other end into one of the official Pi Cameras for photo and video jo...

SKU: AF-2348 | Brand: Adafruit

The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed...