Adafruit

SKU: AF-1392 | Brand: Adafruit

This single button keyfob remote goes with our three basic 315MHz RF receiver modules. It will work with all of them, sending out one command that matches with the second output on the receiver. Its small and light...

SKU: AF-2220 | Brand: Adafruit

The Adafruit Audio FX Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins,...

SKU: PL-2765 | Brand: Pololu

The Adafruit Perma-Proto Quarter-Sized Breadboard PCB (3-Pack) provides three compact prototyping boards that bridge the gap between solderless breadboards and permanent soldered circuits. Each board has 15 rows of 5-...

SKU: AF-2776 | Brand: Adafruit

This miniature push-pull solenoid features a captive armature with a return spring — when energised at ~5 V DC, the armature retracts, and when power is removed it springs back to its original position. The dual-actio...

SKU: AF-2942 | Brand: Adafruit

When your little robot needs someone to lean on, it can lean on this support wheel. Perfect for use with 2-wheeled robots that need a third-point of support, this Support Wheel comes attached to a mounting plate and w...

SKU: AF-2989 | Brand: Adafruit

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability ...

SKU: AF-150 | Brand: Adafruit

A real stand with sponge and double spring prevents your iron from 'rolling away' or burning a hole in the table. If you're starting out and have a 'pen type' soldering iron, this is essential for your safety. Come...

SKU: AF-395 | Brand: Adafruit

An 8-channel bidirectional logic level converter breakout based on the TXB0108 chip. This converter automatically detects signal direction, eliminating the need for direction control pins. It shifts between virtually ...

SKU: AF-3319 | Brand: Adafruit

Make your next audio input/output project in a box with this handy Panel Mount Stereo Audio Extension Cable - 1/8" / 3.5mm. OK its quite a mouthful, but its pretty simple: that headphone or microphone jack you know...

SKU: AF-758 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header...

SKU: AF-3568 | Brand: Adafruit

A 4-wire cable fitted with JST-PH 4-pin female connectors on each end, approximately 150mm (6") long. These compact, latching connectors are commonly used on STEMMA boards, small rechargeable battery packs, RC receive...

SKU: AF-5957 | Brand: Adafruit

The Adafruit DVI Sock is a compact DVI/HDMI output board designed to solder directly onto the end of a Raspberry Pi Pico or Pico W like a little PCB sock. Using the RP2040's PIO system, it enables your Pico to drive a...

SKU: AF-5755 | Brand: Adafruit

If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin connector, this cable will do the trick. It has a 1mm pitch JST S...

SKU: AF-5691 | Brand: Adafruit

The Adafruit ESP32-S3 Reverse TFT Feather places a 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the back of the board, making it ideal for panel-mounted projects where the screen faces outward through an e...

SKU: AF-5628 | Brand: Adafruit

A compact, self-centering analogue thumbstick with a feel and size similar to Nintendo Joy-Con joysticks. It uses two 10kΩ potentiometers (one for each axis) to provide proportional X/Y analogue output, plus a centre-...

SKU: AF-5385 | Brand: Adafruit

This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching f...

SKU: AF-5390 | Brand: Adafruit

Is your house haunted? Or, rather, are you convinced that your house is haunted but have never been able to prove it since you've never had a camera that integrated with your Raspberry Pi Zero but was still small...

SKU: AF-5358 | Brand: Adafruit

If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. It's sorta like a DIY "MagSafe-styled" connector, with four 0.1" spaced cont...

SKU: AF-3888 | Brand: Adafruit

If you want to do more with the BBC micro:bit, getting those pins from the card-edge connector is going to be your first hurdle. Unlike many dev-boards, the micro:bit isn't breadboard friendly. That makes the 'bit dur...

SKU: AF-5157 | Brand: Adafruit

The Adafruit NeoKey 5×6 Ortho is a snap-apart PCB grid of 30 mechanical key switch sockets, each with a reverse-mount NeoPixel LED. Break the grid along its scored tabs to create any rectangular layout you need — 2×3,...