Adafruit

SKU: AF-4650 | Brand: Adafruit

The Adafruit FeatherWing OLED 128x64 adds a crisp 1.3-inch monochrome OLED display and three tactile user buttons (A, B, C) to any Feather board. The 128×64 white OLED pixel array is self-emissive — no backlight neede...

SKU: AF-4547 | Brand: Adafruit

A small submersible DC water pump for fountains, plant-watering systems, and other beginner projects. The pump draws water in from the side of the plastic casing and pushes it out through the tubing port. It runs on 3...

SKU: AF-2185 | Brand: Adafruit

This is your standard USB A-Plug to Micro-USB cable. It's 2 meters long so you'll have plenty of cord to work with for those longer extensions. Perfect for connecting to your Raspberry Pi, Arduino Leonard...

SKU: AF-2775 | Brand: Adafruit

Connect a device with a Mini HDMI port to a regular sized HDMI port together with this basic HDMI cable. It has nice molded grips for easy installation, and is 1.5 meter long (about 5 feet). Perfect for use wi...

SKU: AF-321 | Brand: Adafruit

Connect this to that without soldering using these handy alligator clip test leads. 20" cables with alligator clip on each end, color coded. You get 10 pieces in 5 colors. Strong and grippy, these always come in handy...

SKU: AF-3255 | Brand: Adafruit

A bundle of 12 jumper wires with a mini alligator clip on one end and a male header pin on the other. These are ideal for connecting sewable electronics (Flora, Gemma, micro:bit, Circuit Playground) and other non-head...

SKU: AF-1886 | Brand: Adafruit

If you want to make a kit you'll need some solder. This 0.1 lb (about 50 grams) spool is a good amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials).This spool of solder c...

SKU: AF-3527 | Brand: Adafruit

The Adafruit PiOLED is a compact 128×32 monochrome OLED display that plugs directly onto your Raspberry Pi's GPIO header. At just 1 inch diagonal, it's the perfect status display for headless Pi projects — showing IP ...

SKU: AF-2842 | Brand: Adafruit

A mid-density RGBW NeoPixel strip with 60 individually addressable LEDs per metre on a flexible white PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour cont...

SKU: AF-6121 | Brand: Adafruit

The Adafruit TMC2209 Stepper Motor Driver Breakout Board makes controlling stepper motors easy and virtually silent. Using Trinamic's "Stealth Chopper" technology, this driver delivers smooth, quiet microstepping with...

SKU: AF-5134 | Brand: Adafruit

THE REACTOR'S MELTING DOWN! GRAB THE FUEL CORE, JENNA, AND EVACUATE THE COMMAND CENTER! With this Rotating LED Warning Light with Adjustable Volume Buzzer Alarm, you can monitor and easily alert humanoids as to the st...

SKU: AF-5199 | Brand: Adafruit

This USB dongle/key type thing is a little unusual - it isn't a BLE adapter that you plug into a computer to add wireless capability. (If you do want something like that, our Bluetooth 4.0 USB Module will do the ...

SKU: AF-4340 | Brand: Adafruit

A premium anodised aluminium enclosure for the Raspberry Pi 4 with dual 5V DC brushless fans for maximum cooling performance. The solid aluminium construction provides excellent passive heat dissipation while the two ...

SKU: AF-4326 | Brand: Adafruit

This tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these s...

SKU: AF-1167 | Brand: Adafruit

This silver-plated knit conductive fabric is a flexible, stretchable material for e-textile and soft circuit applications. With a resistance of less than 1 ohm per foot in any direction, it conducts electricity reliab...

SKU: AF-1269 | Brand: Adafruit

The Adafruit 1.2" 4-Digit 7-Segment Display with I2C Backpack in yellow makes it easy to add a large, bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2...

SKU: AF-1788 | Brand: Adafruit

The Adafruit Music Maker MP3 Shield with 3W Stereo Amp turns any Arduino into a powerful audio player, recorder, and MIDI synthesiser — with built-in amplification for driving speakers directly. Powered by the VS1053B...

SKU: AF-2264 | Brand: Adafruit

The Adafruit FT232H Breakout turns your computer into a versatile interface for hardware protocols. Using the FTDI FT232H chip with its multi-protocol synchronous serial engine, you can communicate directly with I2C, ...

SKU: AF-2423 | Brand: Adafruit

The Adafruit PiTFT Plus 2.8" Capacitive Touchscreen is a finger-friendly colour display for the Raspberry Pi. Unlike resistive touchscreens that need a stylus or fingernail, this capacitive version responds to a light...

SKU: AF-2671 | Brand: Adafruit

These 2 mm pitch 40-pin break-apart male headers are designed for modules and boards that use 2 mm pin spacing instead of the standard 2.54 mm (0.1″) pitch. Each pack includes five 40-pin strips that can be easily sna...