Adafruit
Shop Adafruit products at Little Bird Electronics, your trusted Australian source for this iconic maker brand. From NeoPixel LEDs and Feather microcontrollers to Circuit Playground boards and TFT displays, we stock a wide range of Adafruit-designed hardware for every project.
Whether you're building interactive wearables, learning electronics in the classroom, or prototyping IoT devices, Adafruit's well-documented ecosystem makes it easy to get started. Available for delivery across Australia.
Adafruit STEMMA Speaker - Plug and Play Audio Amplifier
SKU: AF-3885 | Brand: Adafruit
The Adafruit STEMMA Speaker combines a Class D audio amplifier with a 1W 8 Ω speaker in one slim, portable package. Connect ground, 3–5V power, and an audio signal via the JST-PH STEMMA connector or the alligator/sew-...
Delivered by Thu 2 Jul
Adafruit AHT20 - Temperature Humidity Sensor Breakout Board - STEMMA QT / Qwiic
SKU: AF-4566 | Brand: Adafruit
The Adafruit AHT20 is an affordable I2C temperature and humidity sensor from the makers of the popular DHT22. It delivers reliable readings with standard I2C communication, making it easy to use with any Arduino, Rasp...
Delivered by Thu 2 Jul
Adafruit VCNL4040 Proximity and Lux Sensor - STEMMA QT
SKU: AF-4161 | Brand: Adafruit
The Adafruit VCNL4040 is a two-in-one proximity and ambient light sensor from Vishay. It measures proximity from 0 to 200 mm (~7.5 inches) using an on-board IR LED, and ambient light from 0.0125 to 6,553 lux — all ove...
Delivered by Thu 2 Jul
Adafruit SPA06-003 Temperature + Pressure Sensor
SKU: AF-6420 | Brand: Adafruit
The Adafruit SPA06-003 is an affordable barometric pressure and temperature sensor from Goertek, ideal for basic environmental sensing and DIY quadcopter builds. It measures 300–1100 hPa (approximately −500 to +9000 m...
Delivered by Thu 2 Jul
Adafruit DAC7578 Breakout - 8 x Channel 12-bit I2C DAC
SKU: AF-6223 | Brand: Adafruit
The Adafruit DAC7578 Breakout provides eight independent 12-bit digital-to-analogue converters in a single package, all controllable over I2C. Set precise output voltages on up to eight channels simultaneously, making...
Delivered by Thu 2 Jul
Adafruit DAC6578 Breakout - 8 x Channel 10-bit I2C DAC
SKU: AF-6258 | Brand: Adafruit
The Adafruit DAC6578 Breakout provides eight independent 10-bit digital-to-analogue converters in a single package, all controllable over I2C. Set precise output voltages on up to eight channels simultaneously, making...
Delivered by Thu 2 Jul
Adafruit SEN6x Breakout for Sensirion SEN66 - STEMMA QT / Qwiic
SKU: AF-6331 | Brand: Adafruit
The Adafruit SEN6x Breakout lets you quickly connect a Sensirion SEN66 (or other SEN6x) environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding r...
Delivered by Thu 2 Jul
Snap-on Mount for Adafruit QT Py
SKU: AF-6183 | Brand: Adafruit
Here is a cute, minimal snap-on mount for your QT Py to keep it safe during use and transport. It has been custom-designed and 3D printed to accommodate the USB-C connector, along with four M3 mounting holes. No screw...
Delivered by Thu 2 Jul
Adafruit Sparkle Motion with wFL External Antenna
SKU: AF-6167 | Brand: Adafruit
The Adafruit Sparkle Motion with wFL External Antenna is the flagship WLED smart LED driver with support for an external Wi-Fi antenna via a wFL connector. It offers the same full feature set as the standard Sparkle M...
Delivered by Thu 2 Jul
Mini Sparkle Motion - WLED-friendly ESP32 NeoPixel LED Driver
SKU: AF-6160 | Brand: Adafruit
Adafruit Sparkle Motion Mini – Compact WLED Smart LED DriverThe Adafruit Sparkle Motion Mini is a streamlined version of our Sparkle Motion series, designed to be the smallest and most powerful WLED-friendly LED drive...
Delivered by Thu 2 Jul
Adafruit LPS28 (LPS28DFW) Pressure Sensor - STEMMA QT / Qwiic
SKU: AF-6067 | Brand: Adafruit
The Adafruit LPS28 Pressure Sensor Breakout features the ST LPS28DFW — a barometric pressure sensor with an extended range up to 4060 hPa, far beyond the ~1260 hPa limit of most competing sensors. This makes it suitab...
Delivered by Thu 2 Jul
Adafruit INA3221 - Triple 0-26 VDC, ±3.2 Amp Power Monitor
SKU: AF-6062 | Brand: Adafruit
The Adafruit INA3221 breakout monitors current, voltage, and power on up to three independent power rails simultaneously over I2C. Each channel supports high or low-side measurement up to +26V DC at ±3.2A with ±1% pre...
Delivered by Thu 2 Jul
Adafruit QT Py CH32V203 Dev Board with STEMMA QT
SKU: AF-5996 | Brand: Adafruit
The Adafruit QT Py CH32V203 is a tiny development board built around the WCH CH32V203G6 — a low-cost RISC-V microcontroller running at up to 144 MHz. In the compact QT Py form factor (Seeed Xiao compatible), it packs ...
Delivered by Thu 2 Jul
Adafruit USB Type C Power Delivery Dummy - I2C or Switchable
SKU: AF-5991 | Brand: Adafruit
The Adafruit USB Type C Power Delivery Dummy (I2C or Switchable) lets you tap into USB-C Power Delivery to get 5V, 9V, 12V, 15V, 18V, or 20V from any compatible USB-C charger or wall adapter — no soldering required. B...
Delivered by Thu 2 Jul
Adafruit SEN54 or SEN55 Adapter Breakout - STEMMA QT / Qwiic
SKU: AF-5964 | Brand: Adafruit
The Adafruit SEN54/SEN55 Adapter Breakout lets you quickly connect a Sensirion SEN5x environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding requ...
Delivered by Thu 2 Jul
Adafruit CH552 QT Py - 8051 Dev Board with STEMMA QT
SKU: AF-5960 | Brand: Adafruit
The Adafruit CH552 QT Py is a compact development board built around the WCH CH552, an enhanced 8-bit 8051 microcontroller. Running at 16 MHz with native USB device support, it packs a surprising amount of functionali...
Delivered by Thu 2 Jul
Adafruit USB Host BFF for QT Py or Xiao with MAX3421E
SKU: AF-5956 | Brand: Adafruit
The Adafruit USB Host BFF adds a USB Host port to your QT Py or Xiao microcontroller, letting you connect keyboards, mice, USB drives, and other standard USB peripherals to your tiny project. It uses the MAX3421E USB ...
Delivered by Thu 2 Jul
Adafruit DC Power BFF Add-On for QT Py
SKU: AF-5882 | Brand: Adafruit
The Adafruit DC Power BFF Add-On lets you power your QT Py or Xiao development board from a DC source up to 20V. The on-board MPM3610 integrated buck converter steps down the input to 5V at up to 1A, with no heat sink...
Delivered by Thu 2 Jul
Adafruit CAN Bus BFF Add-On for QT Py
SKU: AF-5877 | Brand: Adafruit
The Adafruit CAN Bus BFF is a compact add-on that brings CAN bus capabilities to any QT Py or Xiao board. Powered by the MCP26525 chipset with SPI interface, it provides better range and addressing than I2C, making it...
Delivered by Thu 2 Jul
Adafruit Audio BFF Add-on for QT Py and Xiao
SKU: AF-5769 | Brand: Adafruit
The Adafruit Audio BFF is a compact add-on board that turns your QT Py or Xiao into a powerful audio playback device. It features a microSD card slot (up to 64 GB) and a MAX98357 I2S 3W amplifier, all designed to fit ...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
