All Products

SKU: SF-DEV-08467

Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that chann...

SKU: LB-00211

The E-Textiles Rainbow LED strip contains seven LilyPad-style sewable LEDs in six colours, connected in a snap-apart strip. Break off individual LEDs as needed and sew them into clothing, accessories, or craft projects using conductive thread. Each LED board has its colour printed on the back fo...

SKU: LB-ETEXTILERGB

A sewable tri-colour RGB LED module designed for e-textiles and wearable electronics. By grounding the red, green, or blue channel pins individually or in combination, you can produce any colour. The common-anode design means each channel turns on when its pin is connected to ground. The module ...

SKU: AF-4947

The Adafruit 2.13" Tri-Colour eInk Display brings electronic paper technology to your microcontroller projects. Featuring a 250×122 pixel display with black, red, and white ink, this breakout delivers high-contrast, daylight-readable visuals that persist even when power is completely disconnected...

SKU: AF-848

Make some beautiful colors with these diffused 10mm tri-color LED with separate red, green and blue LED chips inside! They make a nice indicator, and fun to color-swirl. We like diffused RGB LEDs because they color mix inside instead of appearing as 3 distinct LEDs. These are Common-Anode type w...

SKU: AF-6415 · MPN: ADA6415

This 7.5" tri-colour e-ink bare display features 800×480 pixels in red, black, and white. E-paper displays are daylight-readable, ultra-low power, and retain their image even when completely depowered — ideal for battery-powered and always-on signage applications. This is the bare display elemen...

SKU: SF-DEV-13735

Blink any color you need! Use the LilyPad RGB LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can produce a broad variety of colors. Each of the colors in the RGB LED are connected to one of the sew tabs on the board labeled R, G, and B.The color channels on ...

SKU: SF-DEV-13903

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up.The LilyPad Rainbow LED features seven individual LEDs in six unique colors (Red, Blue, Green, ...

SKU: AF-1451

Diffused 5mm tri-colour LEDs with separate red, green, and blue chips inside a square "Piranha" (super-flux) package. With a 90° viewing angle and up to 3000mcd combined brightness, these LEDs are great for colour mixing, indicators, and illumination projects. They plug into a breadboard diagonal...

SKU: AF-159

Diffused 5mm tri-color LED with separate red, green and blue LED chips inside! Nice indicator, and fun to color-swirl. 60 degree viewing angle. We like diffused RGB LEDs because they color mix inside instead of appearing as 3 distinct LEDs. These are Common-Anode type which means you connect one...

SKU: AF-4814

The Adafruit 2.13" HD Tri-Colour eInk FeatherWing brings electronic paper technology directly to your Feather board. Featuring a 250×122 pixel display with black, red, and white ink, this FeatherWing delivers high-contrast, daylight-readable visuals that persist even when power is completely disc...

SKU: AF-302

Diffused 5mm tri-color LEDs with separate red, green and blue LED chips inside! Nice indicator, and fun to color-swirl. 60 degree viewing angle. We like diffused RGB LEDs because they color mix inside instead of appearing as 3 distinct LEDs. These are Common-Anode type which means you connect on...

SKU: SF-DEV-14010

A pack of five pink LilyPad LEDs designed for wearable electronics and e-textile projects. The LEDs come attached to one another on a snap-apart strip, ready to be sewn into clothing, accessories, or fabric-based circuits using conductive thread. Each LED features an ultra-thin 0.8 mm PCB with l...

SKU: SF-DEV-11262

The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project. The ProtoSnap LilyPad Development...

SKU: AF-5125

With this Tri-Color USB Controlled Tower Light with Buzzer, you can easily monitor and alert humanoids as to the status of a project, machine, or even if the bathroom is occupied!Unlike our other tower lights, no wiring or microcontroller programming is required. It's completely plug-and-play for...

SKU: LB-LR0220

Light up your E-Textile projects with this set of 5 E-Textile Compatible LED modules. With a working voltage of 3V - 5V and a current of 40mA, these LEDs are perfect for adding a touch of brightness to your wearable electronics. Each module is compatible with the popular Lilypad platform, making ...

SKU: SF-DEV-14012

This is a simple pack of five Blue LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Le...

SKU: SF-COM-07836

This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple color...

SKU: AF-315

These clear 5 mm Piranha (super-flux) LEDs contain separate red, green, and blue chips in a single square package, allowing full RGB colour mixing. With an 80° viewing angle and a combined brightness of up to 2000 mcd, they work well as indicators, illuminators, or colour-swirl effects. The squar...

SKU: SF-COM-11450

These color-changing LEDs take the work out of creating crazy, flashy, blinky… ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LEDs make great decorations, LED “throwies”, indicator lights, etc. Typical forward...