All Products

SKU: ET-1734943

Description: This 1m Cat5 lead is perfect for all your Raspberry Pi networking needs.   Features: LEAD, CAT 5E, 1M, BLACK Connector Type A: RJ45 Plug Connector Type B: RJ45 Plug Cable Length - Imperial: 3.28ft Cable Length - Metric: 1m Jacket Colour: Black Cable Assembly Type: Network ...

SKU: ET-1734948

Description: This 5m Cat5 lead is perfect for all your (longer) Raspberry Pi networking needs. Features: LEAD, CAT 5E, 5M, BLACK Connector Type A: RJ45 Plug Connector Type B: RJ45 Plug Cable Length - Metric: 5m Jacket Colour: Black Cable Assembly Type: Network Cable Length: 5...

SKU: AF-5441

When you want a super skinny Ethernet / CAT-6 cable, this noodle-y UTP jumper is only 3mm thick at the center, so it can flex around enclosures easily. This cable is 1 meter long, comes in Adafruit black. CAT6 means it's great for Ethernet-based LANs and other data networks. U...

SKU: SF-GPS-23748 · MPN: GPS-23748

The SparkFun RTK mosaic-X5 is a high-precision GNSS positioning and navigation receiver built around the Septentrio mosaic-X5 multi-constellation, multi-frequency module. Supporting GPS, GLONASS, Beidou, Galileo, NavIC, SBAS, and QZSS across L1/L2/L5 bands, the 448-channel receiver delivers centi...

SKU: DF-FIT0116

This is a high quality Category 5 (CAT5) patch cables is the solution to your internetworking needs. DOCUMENTS Cat 5 Definition

SKU: AF-909

This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when putting a Beagle Bone, Raspberry Pi, Arduino Ethernet into a box.The jack half has two mounting 'ears' with 4-40 screws installed, 1" inch / 25mm ap...

SKU: AF-5443

When you want a super skinny Ethernet / CAT-6 cable, this noodle-y UTP jumper is only 3mm thick at the center so that it can flex around enclosures easily. This cable is 30cm long, about one imperial foot, comes in Adafruit black. CAT6 means it's great for Ethernet-based ...

SKU: ET-1734946

Description: This 3m Cat5 lead is perfect for all your Raspberry Pi networking needs.   Features: LEAD, CAT 5E, 3M, BLACK Connector Type A: RJ45 Plug Connector Type B: RJ45 Plug Cable Length - Metric: 3m Jacket Colour: Black Cable Assembly Type: Network Cable Length: 3m ...

SKU: AF-3238

This IEEE 802.3af PoE splitter separates power and data from a single PoE Ethernet cable, providing regulated 12VDC at up to 1A on a standard 2.1 mm DC barrel jack alongside a standard Ethernet data connection. It lets you power non-PoE devices over Ethernet without running separate power cables....

SKU: DF-FIT0855

This HDMI to RJ45 Ethernet Cable Extender consisting of a transmitter and a receiver is designed to synchronously transmit audio and video signals up to 30m with zero latency.The module supports HD 1080P video signal transmission.Gold plated HDMI interface, anti-oxidation, not easy to rust.No pow...

SKU: AF-4215

Add a panel-mount Ethernet port to any enclosure without cutting custom shapes. This RJ-45 round panel mount extension cable fits a standard ~30 mm round hole — just drill with a common hole saw, unscrew the plastic nut, insert from behind, and tighten. The plastic lip hides the drill hole for a ...

SKU: AF-4511

If you need to connect an RJ-45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet jack - this adapter will come in very handy! No soldering required - Just flick up the little levers and slide in your stranded or solid-core wire. Note that these aren't recommended for high speed Eth...

SKU: AF-827

We have some great waterproof and weather-proof items in the adafruit shop, but once you have a project built, you'll want to enclose it. But how to keep an enclosure weather/waterproof while still attaching cables for power, data or sensors? That's where cable glands come in. By installing th...

SKU: AF-3785

This isolated PoE splitter takes a unified Power over Ethernet signal from a single RJ-45 cable and separates it into data (Ethernet) and regulated 5V DC power via a Micro USB plug. It works with any 802.3af-capable router or switch, letting you power non-PoE devices over a standard Ethernet run ...

SKU: AF-435

Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable. Of course, you can get a long Ethernet cable but then you have to figure out how to plug it in, making a mess of wires. There is an o...

SKU: ET-1734951

A 10-metre Cat 5e Ethernet cable with RJ45 plugs on both ends. Suitable for connecting a Raspberry Pi, computer, or other networked device to a router, switch, or hub. Specifications Category – Cat 5e Length – 10 m Connectors – RJ45 plug on both ends Conductor Size – 24 AWG Jacket Colour –...

SKU: AF-2913

If you need to connect an RJ45 cable (a.k.a Ethernet) to a board that with an Ethernet Jack - this adapter will come in very handy! No soldering required. Just use a slim screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire and re-tighten. Note that these aren'...

SKU: SF-CAB-09556

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The lea...

SKU: AF-3201

Wireless is wonderful, but sometimes you need the strong reliability of a wired connection. The Ethernet FeatherWing adds quick and easy wired Internet to any Feather board — just plug in a standard Ethernet cable and you're connected. Built around the WIZ5500 Ethernet controller, this FeatherWi...

SKU: DF-DFR0272

An Arduino-compatible Ethernet shield based on the Wiznet W5200 chip, providing a simple way to connect your Arduino to a network. It plugs directly onto an Arduino Uno or Mega 2560 and supports stacking additional shields on top. An aluminium alloy heatsink is fitted to the W5200 chip for therma...