All Products

SKU: DF-FIT0479

This USB 2.0 cable has a USB to microUSB connection. The USB connector is double sided so it can be connected in either orientation and includes an etched LattePanda logo. Each connector has super antioxidant properties for stable performance and durability. The cable can handle current ...

SKU: DF-FIT0903

The cable is compatible with LattePanda 2 Alpha&Delta, and LattePanda 3 Delta 864.With the DC 5.5x2.1mm Power Cable, LattePanda can be powered by a common 12V DC power supply or a 12V battery pack easily. FeaturesExcellent textureMaximum 3A currentSpecificationConnector: DC 5.5x2.1mmCable...

SKU: EF-EF10131

An 80 cm white Micro-USB cable suitable for powering and programming the BBC micro:bit and other Micro-USB devices. The 4-core shielded cable supports both charging (up to 2A) and data transfer simultaneously. Key Features 80 cm Length – Convenient length for desk and classroom use USB-A to M...

SKU: DF-FIT0783

A DC 5.5×2.1mm female to Micro-USB male power adapter plug, allowing you to power Micro-USB devices from a DC barrel jack power supply. Useful for powering Raspberry Pi, LattePanda, phones, and tablets from existing DC supplies. Specifications Input (Female) – DC 5.5×2.1 mm barrel jack Output...

SKU: LB-LS4167

This USB Male to USB Female + MicroUSB + USB-C Adapter is perfect for connecting your USB devices to your computer. It features a male USB connector on one end and a female USB connector on the other, as well as a MicroUSB connector and a USB-C connector. This adapter is compatible with most U...

SKU: PL-1065

This single-row, 40-pin straight male header strip with 0.1" (2.54mm) pitch features extended pins on both sides of the plastic spacer. The breakaway design lets you snap or cut it into any length you need. Unlike standard male headers where one side is short (for soldering), this double-sided v...

SKU: DF-FIT0552

Run your LattePanda on a PC in pip(Picture in Picture) mode at the speed of light. Appreciating that we need a better way to interact between different platforms, the Streaming Cable enables your LattePanda to act like a USB on a PC. Just plug & play! The PiP (Picture in Picture) form also elimin...

SKU: AF-4106

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on each end using the flex cable clips. There are options a-plenty! This version i...

SKU: DF-DFR0706-EN

UNIHIKER is a compact single-board computer with a built-in 2.8-inch touchscreen, Wi-Fi, and Bluetooth. It features an array of on-board sensors — light sensor, accelerometer, gyroscope, and microphone — along with a co-processor for communicating with analogue, digital, I2C, UART, and SPI periph...

SKU: DF-DFR0546-1 · MPN: DFR0546-1

This compact LattePanda 2 Alpha 864s kit is a pocket-sized single board computer built around an Intel Core i5 processor, with 8GB of memory and low power consumption for embedded computing projects.It is suited to edge computing, vending machines, advertising displays, industrial automation, IoT...

SKU: DF-DFR1170 · MPN: DFR1170

The DFRobot 10.5" LED Touch Portable Monitor delivers crisp 1920×1280 visuals on an IPS panel with LED backlighting, 400 cd/m² brightness, and a 1500:1 contrast ratio. The fully laminated 10-point capacitive touch screen provides smooth, responsive interaction with no touch breakpoints, and at ju...

SKU: AF-4342

Ready Players 1 and 2? Double up on your MakeCode gaming with a Sync Cable! We got this Micro B USB to Micro B USB cable specially made to connect you and your frenemy for co-op fun or player-versus-player showdowns. Works with our PyBadges and PyGamer - we connected the JACDAC pin to the 5th ID ...

SKU: DF-DFR0706-EN-5 · MPN: DFR0706-EN-5

The UNIHIKER M10 is a compact single-board computer featuring a 2.8-inch touchscreen, Wi-Fi, Bluetooth 4.0, and a suite of built-in sensors. Running Debian Linux on a quad-core ARM Cortex-A35 processor with 512 MB RAM and 16 GB flash, it's ready to go out of the box with pre-installed Jupyter Not...

SKU: DF-DFR1249 · MPN: DFR1249

Add mobile network connectivity to a LattePanda IOTA with this dedicated M.2 4G LTE expansion board. It provides a standard M.2 B-Key slot for installing a compatible cellular module, making it useful where Wi-Fi is unavailable or unreliable.The board connects to the LattePanda IOTA via a direct ...

SKU: DF-DFR1226 · MPN: DFR1226

LattePanda IOTA is a palm-sized x86 single-board computer designed to bridge rapid prototyping and commercial deployment. It combines an Intel Processor N150 with onboard 8GB LPDDR5 memory and 64GB eMMC storage in the classic LattePanda V1 footprint.The board keeps the compact 88mm x 70mm form fa...

SKU: DF-ROB0147

Max:Bot An entry-level DIY robot that maximizes children’s creativityWhat is Max:Bot?Max:Bot is a programmable toy for 8+ years old kids to learn about robotics.Learn RoboticsCreate your kid’s own inventionRobotics CompetitionSPECIFICATION Power Supply: AA Battery x 4 Operating Voltage: 3.3V...

SKU: SF-CAB-21740

This is a 10 meter (33 ft) long Male TNC to Male SMA cable with injection molded stress-relief boots. This is an excellent cable for connecting one of our RTK development boards to a high quality 'UFO' style GNSS antenna. It's long enough to connect to an antenna on the roof to one of our GNSS re...

SKU: AF-1325

The Adafruit FPC Stick is a double-sided adapter PCB for connecting to 0.5 mm or 1.0 mm pitch flat flexible cables (FPCs). One side accommodates 0.5 mm pitch connectors, while the other handles 1.0 mm pitch — and it can also work with some 2.0 mm pitch connectors. Each of the 20 FPC pads breaks o...

SKU: PR-PIM349

Handy accessories to get you started with micro:bit!This dandy little kit has a battery pack for portable projects, and a micro-USB cable to connect your micro:bit to your computer to start your coding adventures.The battery pack contains two AAA batteries and has a switch to turn the power ...

SKU: DF-DFR0545-1 · MPN: DFR0545-1

This compact single board computer brings PC-class computing into maker, IoT, edge computing and automation projects. Based on an Intel Core m3 processor, it can run full Windows 10, Linux and Android systems while staying small enough to embed inside interactive builds, robotics controllers, kio...