All Products

SKU: AF-4830 · MPN: 4830

The Adafruit MPR121 Gator Breakout adds 12 capacitive touch inputs to any microcontroller project — no soldering required. With large alligator/croc-clip friendly pads and STEMMA QT / Qwiic connectors, simply clip conductive materials to the pads and plug into your board's I2C port. The MPR121 h...

SKU: EF-EF04011

The Octopus Touch PAD Sensor is a capacitive touch module based on the TTP223-BA6 IC. It detects touch through dielectric materials such as glass, ceramic, and plastic, making it suitable for touch-through-panel applications. The module connects via a 3-pin Octopus connector for plug-and-play use...

SKU: AF-4600 · MPN: 4600

The Adafruit QT Py SAMD21 is the original QT Py — a tiny development board built around the ATSAMD21E18 (ARM Cortex-M0+ at 48 MHz) with native USB, a STEMMA QT connector, and an RGB NeoPixel. It's the same chip found in the popular Trinket M0 and GEMMA M0, now in a Seeed Xiao-compatible form fact...

SKU: AF-2024 · MPN: 2024

The Adafruit Capacitive Touch Shield brings 12 channels of capacitive touch sensing to any Arduino using the MPR121 chip. Each sensor has a "figure 8" pad with holes designed for quick alligator clip connections — attach one end to the shield and the other to any conductive object like metal, fru...

SKU: AF-4870 · MPN: 4870

The Adafruit Neo Trinkey is a tiny USB-A development board featuring an ATSAMD21 microcontroller and four RGB NeoPixel LEDs. Just plug it into any USB-A port on a computer or laptop and you've got a programmable, colourful key that can act as a status indicator, macro keypad, MIDI controller, or ...

SKU: AF-5800 · MPN: ADA5800

Built for larger TTL-interface TFTs, this development board makes it much easier to experiment with 40-pin RGB-666 displays using an ESP32-S3. It is aimed at panels that go beyond the usual SPI-driven sizes and resolutions, including square, round and bar-style displays that need continuous pixel...

SKU: AF-1602 · MPN: 1602

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has a very nice feature that makes it stand out for us: it will light up the 8 onboa...

SKU: AF-2340 · MPN: 2340

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clips to the HAT and the other end to anything conductive (metal, fruit, vegetables,...

SKU: DF-DFR1092 · MPN: DFR1092

This 3.5-inch display module combines a 480 × 320 IPS panel with capacitive touch for ESP32 and Arduino projects. Its optical bonding process laminates the touch panel and display together, improving clarity while helping reduce reflections and dust ingress.For wiring, the module offers both a st...

SKU: SF-WRL-15663 · MPN: WRL-15663

Built around Espressif's ESP32-WROOM module, this Feather-compatible development board is a handy starting point for WiFi, Bluetooth and battery-powered IoT projects. The dual-core Xtensa 32-bit LX6 processor runs at up to 240MHz, with 16MB of embedded flash and 520KB of internal SRAM on hand for...

SKU: WS-29318 · MPN: 29318

A 3.5" IPS display module with 320×480 resolution, 262K colours, and a 2-point capacitive touchscreen. The ST7796S display driver communicates over SPI while the FT6336U touch controller uses I2C, keeping wiring simple. An onboard voltage translator supports both 3.3 V and 5 V logic levels. Comp...

SKU: EC-AS00121CTH

This Capacitive Touch Shield has 9 build-on capacitive touchpads, and the other 3 electrodes for further usage. With this shield, you can have a total of 12 touch-sensitive buttons. This Shield uses the MPR121 which is a great way to build simple capacitive touch interfaces using the I2C communic...

SKU: WS-30711 · MPN: 30711

Unlock Your Development Potential with the RP2350 2inch Capacitive Touch DisplayEngineer the future with the RP2350 2inch Capacitive Touch Display Development Board, designed by Waveshare to be your go-to for innovation and interactive projects. This high-performance MCU board integrates a multit...

SKU: AF-2090 · MPN: 2090

The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a capacitive single-touch touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delivers vivid colour output for interactive projects. The breakout supports two inte...

SKU: WS-30697 · MPN: 30697

ESP32-S3 2.1inch Capacitive Touch Round Display Development BoardUnleash Your Creativity with Cutting-Edge TechnologyUnveiling the ultimate tool for innovators, the ESP32-S3 Round Display Development Board – your perfect companion for designing and prototyping next-gen smart devices. Dive into th...

SKU: AF-1947 · MPN: 1947

The 2.8" TFT Touch Shield with Capacitive Touch plugs directly into an Arduino and provides a bright, full-colour display with a smooth glass capacitive touchscreen and onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI for the d...

SKU: PR-PIM272

Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?) Touch pHAT has six capacitive touch buttons, each with a bright white LED, designed to be completely agnostic about what they're used for. You can even use a dry erase pen to wri...

SKU: EC-DIS08070H

This CrowPanel module is a 7.0-inch HMI touch display built around the ESP32-S3-WROOM-1-N4R8, giving you a ready-to-program screen for IoT, automation and user-interface projects. The 800*480 TFT-LCD uses capacitive touch for responsive interaction, with WiFi and Bluetooth available from the ESP3...

SKU: AF-5395 · MPN: 5395

The Adafruit QT Py ESP32 Pico brings the full power of the classic ESP32 into the tiny QT Py form factor. Built around the ESP32-PICO-V3-02 — an all-in-one module with dual-core 240 MHz Tensilica processor, Wi-Fi, Bluetooth Classic + BLE, 8 MB flash, and 2 MB PSRAM — this thumbnail-sized board is...

SKU: AF-1374 · MPN: 1374

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.When a capacitive load is detected (e.g. a person touches the sensor-pad area...