All Products

SKU: DF-DFR0258

This RS232 Shield For Arduino is designed for the Arduino controller,and it can easily convert UART to RS232 interface. The RS232 shield integrates DB9 connectors (female) that provide connection to various devices with RS232 interface. Also the RS232 shield headers will facilitate your co...

SKU: DF-DFR0734

An industrial-grade RS232 expansion shield designed specifically for the LattePanda V1. Adds one RS232 port (D-Sub 9-pin male) with signal isolation, power isolation, and surge protection for reliable serial communication in demanding environments. Uses a stackable connection with copper standof...

SKU: DF-TEL0190 · MPN: TEL0190

RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...

SKU: DF-DFR0778

An industrial-grade RS232 expansion shield designed for the LattePanda Alpha and LattePanda Delta. Adds a 9-pin D-Sub (DB9) male RS232 port using an FTDI USB-to-serial chip with an isolated transceiver module for reliable data transmission in demanding environments. The stackable design mounts o...

SKU: DF-TEL0070

A multi-protocol converter board that supports USB, TTL, RS232, and RS485 interfaces. It can convert signals between any two protocols and supports one input to multiple outputs simultaneously — for example, converting a USB signal to TTL, RS232, and RS485 at the same time. Based on the FTDI FT2...

SKU: DF-DFR0077

This converter uses MAX202-based level shifter for converting TTL (Transistor-Transistor Logic) -level serial to standard RS232 serial.RS232 is widely used in radio modifications,phone flash, XBOX360 flash, GPS, vehicle detection, DVD flash, hard disk repair set-top box upgrade. It can be used to...

SKU: SF-BOB-11189

The ‘must have’ IC for TTL/CMOS projects finally has its own breakout board! This is the RS232 converter IC that is capable of running at 3V and communicating with 5V logic.We’ve taken the SOIC package MAX3232 and broken out all the pins you need to set up your RS232 to TTL connection. We’ve also...

SKU: WS-19979

The 2-Channel RS232 Module for Raspberry Pi Pico converts UART signals to RS232 and vice versa using the SP3232EEN transceiver. It plugs directly onto the Pico via the onboard female pin header — no wiring required. The module provides two independent RS232 channels with TVS and ESD diode protec...

SKU: DF-TEL0038

A passive RS-232 to RS-485 converter that extends serial communication distance up to 1.2km using balanced differential signalling. Self-powered from the RS-232 TX/RX or RTS/CTS lines — no external power supply required. Features opto-isolation and lightning/surge protection for reliable industri...

SKU: EC-CIN3232RT

This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port. It is applicable to a variety of platforms including Arduino / AVR / ARM. For A...

SKU: SF-WRL-13225

The SparkFun XBee Explorer Serial is an RS232 serial base unit for configuring and communicating with XBee modules. Compatible with all XBee modules including Series 1, Series 2.5, standard, and Pro versions. Simply plug in an XBee module, connect an RS232 cable, and gain direct access to the ser...

SKU: DF-DFR0904

This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 21 I/Os including 6 analog and digital inputs, 5 digital isolated inputs, 2 interrupt isolated inputs, 3 analog outputs, 5 di...

SKU: DF-DFR0905

This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 17 I/Os including 4 analog and digital inputs, 2 interrupt isolated input, 3 analog outputs, 8 digital isolated relay outputs...

SKU: DF-FIT0857

This DB9 Female to RJ45 Female Adapter can be used to handleserial data communication between RS232 devices with one RJ45 network cable, or as an extender to extend RS232 serial signal to about 20m.Two modules are required for serial port to network cable transmission. It enables to extend seria...

SKU: DF-DFR0016

This is a design for an open-source prototyping shield for Arduino Mega. It has tons of cool features, to make prototyping on your Arduino easy. Some assembling and soldering is required! Some assembling and soldering is required! FEATURES Reset button up top ...

SKU: SF-COM-00589

The ‘must have’ IC for 3V projects. This is the RS232 converter IC that is capable of running at 3V and communicating with 3V logic. Comes in an easy to solder 16-Pin SOIC SMD package. Requires four external 0.1uF ceramic capacitors - no more 10uF monsters! Operates from 2.7V to 6V.

SKU: LB-CTCYELLOW

A classroom replenishment kit for the Crack the Code unit of work. This set provides 21 complete Arduino kits, each with a Little Bird Arduino R3 board, Crack the Code Shield, storage case, and USB cable — ready for a full class of students. Package Contents 21× Little Bird Arduino R3 boards 21...

SKU: DF-TEL0010

This USB to TTL converter combine the USB-232-1 (USB to Single RS232 Adapter) and TTL-232-1 (Port-powered RS232/TTL converter) allows you to convert USB to TTL/CMOS compatible levels and vice versa. It can be used to set up APC220 RF wireless module. It can be used as STC microcontroller p...

SKU: EC-ACS02453S

Arduino Mega ProtoShield V3.0 use with Arduino MEGA to build circuit. You can soldering the components on this shield and also you can set up circuit through the mini breadboard.Arduino Mega ProtoShield V3.0 adopts the prototype V3 gold PCB sink process, mainboard golden square pad spacing small,...

SKU: DF-DFR0171

The DFRobot Arduino-Compatible Screw Shield is a terminal expansion board that allows you to screw in jumper wires to a screw terminal for a much stronger and secure connection for your I/O and power pins. Feel secure with this arduino-compatible screw shield. The screw shield v2 from DFRobot...