All Products

SKU: AF-3346

The Adafruit I2S 3W Stereo Speaker Bonnet adds high-quality digital audio output to any Raspberry Pi with a 2×20 GPIO header. Using the I2S digital sound standard, audio data goes directly to the onboard Class D amplifier — delivering crisp, static-free stereo sound without relying on the Pi's he...

SKU: AF-3412

*NOTE - No longer available - however we do have this: Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi [Mini Kit] * Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl of cereal - while it's great on its own, y...

SKU: LB-LS6972x2

A compact stereo speaker pair for small audio projects, handheld devices, and embedded builds. Each 45mm driver is rated at 4Ω and 3W, delivering clear, balanced sound in a slim form factor. Pre-wired with a PH2.0 plug for quick connection to common audio amplifier boards. Key Features Stereo ...

SKU: AF-5769

The Adafruit Audio BFF is a compact add-on board that turns your QT Py or Xiao into a powerful audio playback device. It features a microSD card slot (up to 64 GB) and a MAX98357 I2S 3W amplifier, all designed to fit neatly on the back of your miniature dev board. The board connects over the SPI...

SKU: AF-1669

Listen up! This set of two 2.8" x 1.2" speakers are the perfect addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like these speakers as they are small and enclosed for good audio volume and quality. The pair have a handy SPK input cable to a...

SKU: AF-3422

The Adafruit Arcade Bonnet makes it easy to build retro gaming projects with a Raspberry Pi. It's sized to match the Pi Zero for compact builds, but works with any Pi that has a 2×20 header (Pi Zero, Pi 2, Pi 3, Pi B+, etc.). The bonnet manages all buttons and switches through an I2C GPIO expand...

SKU: LB-LS6842

This compact audio solution pairs the MAX98357 I2S digital amplifier with a high-quality 3W 8Ω 3070 full-range speaker, delivering clear and powerful sound from any I2S-enabled microcontroller. The MAX98357 accepts digital audio directly over I2S and handles conversion and amplification internall...

SKU: AF-5770

The Adafruit I2S Amplifier BFF is a compact add-on that brings high-quality 3W audio to any QT Py or Xiao development board. Featuring a MAX98357 Class D amplifier, it delivers crisp I2S digital audio using just three GPIO pins (A0, A1, A2) that don't conflict with I2C, UART, or SPI. Designed as...

SKU: DF-FIT0502

INTRODUCTION FIT0502(Stereo Enclosed Speaker) is a new passive speaker with JST PH2.0 interface. It is a perfect option for any DIY audio project which requires an 8 ohm impedance and 3W power. The suitable size and screw holes make it to be mounted. Let your robot have a loud voice, and no ...

SKU: AF-3006

The Adafruit MAX98357A I2S Class D Amplifier Breakout is an all-in-one digital audio solution that decodes I2S audio and amplifies it directly to a speaker — no separate DAC required. Delivering up to 3.2W into a 4Ω speaker, it's a compact and efficient way to add amplified sound to your Raspberr...

SKU: LB-LS0045

A fun DIY electronics kit that builds into a compact stereo amplifier speaker with a transparent case and LED music spectrum display. A great soldering project for beginners and hobbyists alike. The kit requires circuit board assembly and soldering — everything you need is included in the box. O...

SKU: WS-34213

DA7212 I2S Audio Boardfor Raspberry Pi Supports stereo encoding/decoding and rich audio processing functions Designed for the Raspberry Pi 40-pin GPIO header, this module is fully compatible with Raspberry Pi series boards. It features the high-quality DA7212 stereo DAC, controlled via I2C, with ...

SKU: AF-3957

The Adafruit CRICKIT HAT is a robotics and electronics driver board that plugs directly onto any Raspberry Pi with a 2×20 GPIO header. It adds motor drivers, servo outputs, capacitive touch inputs, a level-shifted NeoPixel driver, and a 3W I2S audio amplifier — all managed over I2C via the Adafru...

SKU: AF-1667

This compact 7" IPS display delivers 1280×800 (720p) resolution with built-in 3W stereo speakers and multiple video inputs including HDMI, VGA, and composite (NTSC/PAL). Simply connect a 9–12V DC adapter and a video source for an instant mini monitor. The display features front-panel buttons for...

SKU: AF-3369

Add some crisp and compact audio to your project with this Mini External USB 2.0 Speaker. It's USB-only and does not require or use a 3.5mm audio jack. You'll get great audio, even with a device that doesn't have a head phone jack. And since it is powered over USB, there's no need to char...

SKU: AF-4445

A compact 2.8" × 1.2" enclosed mono speaker delivering clear audio output at 3W and 4 ohm impedance. The sealed enclosure provides improved sound quality and volume compared to bare speaker drivers of a similar size. This speaker comes with plain bare wires (no connector), making it easy to sold...

SKU: AF-3351

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small and enclosed for good audio volume and quality. It has a handy JST 2PH input ca...

SKU: DF-DFR0119-O

This compact stereo amplifier module from DFRobot features a 2.54mm pin pitch for easy breadboard and embedded use. It delivers 3W per channel with left and right stereo output, and includes a shutdown (SHDN) pin for switching between working and sleep modes. By default, the module is in working...

SKU: PI-PIM462

The Picade X HAT turns your Raspberry Pi into a retro arcade console by adding joystick and button inputs, a 3 W I2S DAC/amplifier for audio, and a safe power on/off system — all through a single HAT that powers your Pi via USB-C (no separate power supply needed). Female Dupont connectors make w...

SKU: AF-1313

Listen up! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 8 ohm impedance and 1W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm apart.Works great with our Wave shield or class D amplifier board.