All Products

SKU: PI-COM1305

A compact 2×AAA battery holder with a built-in power switch and JST connector, compatible with micro:bit and other boards that accept JST battery inputs. This is the same battery holder included in our micro:bit accessories kit. Key Features Power Switch – On/off switch for convenient power co...

SKU: AF-4192

A slim, open-top 2×AAA battery holder with a genuine JST PH connector. Two AAA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and boards with JST PH battery inputs. The JST PH connector polarity matches Adafruit's Li-Ion/LiPo...

SKU: SF-PRT-15101

This is a unique two-cell AAA battery holder built specifically for the BBC micro:bit. The 6" (~150mm) cable has been terminated with a JST-PH connector. The connector mates the JST socket on the micro:bit perfectly, allowing you to easily make your project battery powered. Note: Please k...

SKU: DF-FIT0625 · MPN: FIT0625

This compact battery holder is a handy portable power pack for small electronics and maker projects. It holds two AAA batteries and connects them in series, making it suitable for projects that need a simple removable battery supply.The holder includes a cover and an integrated power switch, so y...

SKU: AF-1405

Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to get you started with this fun wearable computer. Included are enough parts to make your first wearable electronic project. There's a Flora motherboard, four ultra-bright chainable RGB pixels, a 3x...

SKU: AF-727

A slim 3×AAA battery holder with a built-in on/off switch and JST 2-pin connector. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery connector. Uses a genui...

SKU: AF-3286

A slim 3×AAA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery...

SKU: AF-4193

A slim 2×AA battery holder with a built-in on/off switch and genuine JST PH connector. Two AA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and portable builds without needing to disconnect the battery to turn off power. The...

SKU: AF-5234

An accessories kit for building a complete Adafruit LED Glasses project. Includes a chunky plastic glasses frame as a mechanical base, a STEMMA QT cable for connecting the LED panel to the driver board, a portable battery holder with belt clip, an extension cable, and mounting hardware. Key Feat...

SKU: AF-4194

A slim, open-top 2×AA battery holder with a genuine JST PH connector. Two AA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, Adafruit boards, and microcontrollers with JST PH battery inputs. The JST PH connector polarity matches Adafruit's Li-I...

SKU: AF-1657

Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA board, four sewable bright RGB pixels, a battery holder and batteries, 2-ply conductive thread, alligator clips to help you test out your circuit, and a U...

SKU: AF-3287

A compact 3×AA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST batte...

SKU: AF-1578

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a full range of LiP...

SKU: SF-PRT-14219

A 2×AAA battery holder with a sliding cover and built-in ON/OFF switch. The cover keeps batteries secure, and the switch provides convenient power control for your project. Wire leads are approximately 150 mm long with 5 mm tinned ends. Specifications Capacity – 2× AAA batteries (3 V total) S...

SKU: AF-5627

A curated electronics kit built around the Adafruit CLUE board and PyLeap — Adafruit's app for wirelessly transferring code and assets from the Learn system directly to your device. No complicated setup or USB cable needed for programming once you're connected via Bluetooth. The CLUE board packs...

SKU: LB-BATTERYAA

A 2× AA battery holder with on/off switch, designed for powering the BBC micro:bit on the go. The JST connector plugs directly into the micro:bit's battery port, and the ~14 cm cable provides enough length for flexible mounting. Key Features 2× AA Battery Holder – Provides 3 V from standard AA...

SKU: SF-DEV-11893

The LilyPad Simple Power is a simple e-textile board that lets you connect and charge a lipo battery and switch it on or off, that’s it! We provide you with a JST connector and a slide switch, you supply the battery and sewing skills! With this LilyPad Simple Power, you should find no trouble in ...

SKU: LB-LR0335-B

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant blue when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar to neon tubing — but remains cold to the touch and can be bent, shaped, and wra...

SKU: SF-PRT-09925

This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small Phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project. The leads are about 1...

SKU: LB-LR0335-PI

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant pink when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar to neon tubing — but remains cold to the touch and can be bent, shaped, and wra...