All Products
Showing 41-47 of 47 products · 13 unavailable products hidden
10-pin IDC Socket Rainbow Breakout Cable
Adafruit Floppy FeatherWing with 34-Pin IDC Connector
SWD 0.05 Pitch Connector - 10 Pin SMT Box Header
40-pin FPC to Right Angle 2x20 IDC Male Plug Header Adapter
32x32 RGB LED Matrix Panel - 5mm Pitch
Miniature 8x8 Red LED Matrix
RGB LED Strip Driver Shield v1.0
10-pin IDC Socket Rainbow Breakout Cable
A breakout cable with a 10-pin IDC socket connector on one end and individual 0.1" female socket pins on the other, connected by 6 inches (150mm) of colour-coded rainbow ribbon cable. Useful for breaking out 10-pin headers to individual connections on a breadboard or test setup. Key Features 1...
Adafruit Floppy FeatherWing with 34-Pin IDC Connector
The Adafruit Floppy FeatherWing lets you read and write 3.5-inch or 5.25-inch floppy disks using a Feather microcontroller. It connects to standard 34-pin IDC floppy drives and includes built-in level shifting between 3.3 V Feather logic and the 5 V signals that floppy drives require. Floppy dri...
SWD 0.05 Pitch Connector - 10 Pin SMT Box Header
This 1.27mm pitch, 2x5 male SMT Box Header is the same one used on our SWD Cable Breakout Board. The header alone is great if you want to incorporate this piece of hardware with your own software. We're specifically selling it so you can solder it onto our nRF52 Feather to add SWD debu...
40-pin FPC to Right Angle 2x20 IDC Male Plug Header Adapter
A 40-pin FPC to right-angle 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT...
32x32 RGB LED Matrix Panel - 5mm Pitch
A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 5mm pitch. Designed for indoor use with a wide 160° viewing angle and pre-balanced white output, these panels look great in ambient light. The slightly larger pitch than 4mm panels makes them well-suited for displays viewed at moderate di...
Miniature 8x8 Red LED Matrix
You will squeak with delight when you hold this adorable miniature LED 8x8 matrix. 0.8" square, it's got everything a big LED matrix has, but bite-sized! There are 16 pins on the side, 8 on each, with 0.1" spacing so you can easily plug it into a breadboard with plenty of space to wire it upSi...
RGB LED Strip Driver Shield v1.0
The RGB LED Strip Driver Shield allows you to control 12 V RGB LED strips (common anode) directly from an Arduino. With three PWM outputs capable of up to 3 A each, the shield can drive up to 10 metres of RGB LED strip. A built-in IR receiver enables remote control operation, and an on-board fuse...
