All Products

SKU: AF-4979

The NeoKey FeatherWing adds two mechanical key switch sockets with individually addressable NeoPixel backlighting to any Feather-format microcontroller. Each socket accepts Cherry MX or compatible switches (Kailh, Gateron, etc.) without soldering, using Kailh hot-swap sockets. A reverse-mount Ne...

SKU: AF-4702

The Adafruit RGB Matrix FeatherWing Kit for nRF52840 lets you drive HUB75-type RGB LED matrices from nRF52840-based Feather boards. With built-in power regulation and a compact form factor, it's the easiest way to create colourful scrolling displays and LED wall projects using the Feather ecosyst...

SKU: AF-5709

The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps over a two-wire differential bus. Only an SPI port and two pins (chip-select and ...

SKU: AF-3622

Add heat-vision to any Feather board with the Adafruit AMG8833 Thermal Camera FeatherWing. This sensor from Panasonic contains an 8×8 array of infrared thermal sensors that returns 64 individual temperature readings over I2C — like a compact thermal camera in FeatherWing form factor. The AMG8833...

SKU: AF-6348 · MPN: ADA6348

Add reliable wired Ethernet to your microcontroller project with the Adafruit Wiz5500 Ethernet Breakout Board. The WIZ5500 chip handles TCP/IP over SPI, letting you skip the hassle of WiFi passwords and antennas for a fast, dependable network connection. The breakout includes full level shifting...

SKU: AF-6305 · MPN: ADA6305

Keep your Adafruit Feather RP2350 with HSTX Port protected during use and transport with this cute, minimal enclosure. It has been custom-designed to fit the Feather RP2350 HSTX board, including the version with 8MB of PSRAM.The case is 3D printed from translucent milky white plastic using an SLA...

SKU: AF-2923

The Adafruit Latching Mini Relay FeatherWing lets you control mains-powered devices and small appliances using any Feather microcontroller. Switch lamps, fans, solenoids, and other loads rated up to 250 VAC or DC — all from a compact FeatherWing form factor. This is the latching version, which u...

SKU: AF-2945

The NeoPixel FeatherWing adds a 4×8 matrix of 32 individually addressable RGB LEDs to any Adafruit Feather board. Using Feather stacking headers or female headers, the wing connects directly on top or bottom of your Feather for a compact, colourful display. Only one pin is required to control al...

SKU: AF-4339

This laser-cut acrylic enclosure kit turns your 4×4 NeoTrellis setup into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside the NeoTrellis RGB Driver PCB. The enclosure inclu...

SKU: AF-3988

The Adafruit Prop-Maker FeatherWing is an all-in-one add-on for building light sabers, cosplay props, interactive toys, and wearable effects. It combines NeoPixel LED driving, a 3W RGB LED driver, a motion-sensing accelerometer, and a Class D audio amplifier onto a single Feather-format board — e...

SKU: AF-1028

Add a large, vibrant tri-colour eInk display to your microcontroller project with this 2.9" breakout board. The panel displays red, black, and white pixels at 296×128 resolution that remain visible even with power completely disconnected — just like printed paper, but with the added impact of col...