All Products
Showing 41-43 of 43 products · 17 unavailable products hidden
USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi
Adafruit Triple LED Matrix Bonnet for Raspberry Pi HUB75
MPN: ADA6358
Black Nylon Screw and Stand-off Set – M2.5 Thread
USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB por...
Adafruit Triple LED Matrix Bonnet for Raspberry Pi HUB75
· MPN: ADA6358
Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the active3 pinout, so it can handle roughly three times as many panels or pixels as...
Black Nylon Screw and Stand-off Set – M2.5 Thread
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the Adafruit breakout/dev board mounting holes (2.5mm or 0.1" drill holes). Works g...
