All Products
Showing 41-55 of 55 products · 5 unavailable products hidden
Gravity: Electrochemical Oxygen Sensor (0-100%Vol) - I2C
This full-scale oxygen sensor uses an original AO2 CiTiceL electrochemical probe to measure oxygen concentrations from 0–100%Vol via I2C digital output. A built-in calibration algorithm on the signal board supports single-point or double-point calibration for accurate readings in demanding enviro...
SHT20 I2C Temperature Humidity Sensor (Waterproof Probe)
This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens® SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test. The SHT20 I2C temperature & humidity sensor adopt Sensirion techniqu...
URM15 - 75KHZ Ultrasonic Sensor (30~500cm, RS485)
The DFRobot URM15 is an industrial-grade ultrasonic ranging sensor with an IP65-rated waterproof probe. It provides an effective measuring range of 30–500 cm (tested against a flat wall) and communicates via an RS485 interface using the standard Modbus RTU protocol, making it compatible with PLCs...
Gravity: Arduino EC (Electrical Conductivity) Sensor / Meter
The Gravity EC (Electrical Conductivity) Sensor measures the conductivity of aqueous solutions, providing an analogue output for Arduino and compatible microcontrollers. EC measurement is essential for monitoring water quality, nutrient levels in hydroponic systems, and soil salinity in agricultu...
Arduino Portenta C33 Development Board
·
##Introduction The Arduino Portenta C33 is a streamlined module that offers the high performance of the Arduino Portenta family at a lower price point, thanks to optimizations and streamlined features. Ideal to developing cost-effective, real-time applications, the Portenta C33 features the ARM® ...
SparkFun Triple Axis Accelerometer Breakout - KX132 (Qwiic)
This SparkFun Triple-Axis Accelerometer Breakout is a simple Qwiic breakout for the KX132 digital accelerometer from Kionix. The KX132 is a low-power, 16-bit resolution three-axis accelerometer with four user-selectable acceleration measurement ranges of ±2g/4g/8g/16g and has up to a 10kHz (max) ...
Gravity: Analog Turbidity Sensor For Arduino
The Gravity Analog Turbidity Sensor measures water clarity by detecting the level of suspended particles. It works by measuring light transmittance and scattering rate, which change with the amount of total suspended solids (TSS) in the water. The sensor provides both analogue (0–4.5V) and digit...
Water-proof Ultrasonic Sensor (ULS)
A high-performance waterproof ultrasonic distance sensor with an enclosed probe, capable of measuring distances from 270 mm to 8000 mm. Based on ultrasonic echo ranging, it determines distance by measuring the time between sending a pulse and receiving the echo — no physical contact required. Su...
Capacitive Liquid Level Sensor for Arduino
Different from our previous liquid level sensors, this capacitive liquid sensor can be used to detect high-viscosity and low-corrosive liquids, such as glue, lubricating oil, grease, ink, engine oil, powder and other special materials. The sensitivity of the sensor can be adjusted by the knob (cl...
SparkPNT GNSS Flex Module - LG290P - SparkFun Electronics
·
The SparkPNT GNSS Flex Module delivers centimetre-level RTK positioning using the Quectel LG290P receiver with quad-band support (L1, L2, L5, E6/L6) and multi-constellation tracking across GPS, GLONASS, Galileo, BDS, QZSS, and NavIC. With a built-in NIC anti-jamming unit and 1,040 tracking channe...
Gravity: Analog pH Sensor/Meter Kit V2
The Gravity Analog pH Sensor/Meter Kit V2 is designed to measure the pH of liquids, indicating acidity or alkalinity on a scale of 0–14. It's commonly used in aquaponics, aquaculture, hydroponics, and environmental water testing. The kit includes a laboratory-grade pH probe, a signal conversion b...
Infrared Emitter LTE-302
·
This compact IR emitter is a light emitting diode designed to transmit infrared signals, such as those used in remote control and generic IR communication projects.It operates at 940nm, making it suitable for common infrared receiver systems. Like any LED, it should be used with an appropriate cu...
1MΩ ±5% 1/6W PTH Carbon Film Resistor
·
This is a basic 1 MOhms through-hole resistor with ±5% tolerance and a 1/6W power rating. It is a simple passive component suited to prototyping, repairs and general circuit building.The PTH package is commonly used with solderless breadboards, perf boards and other through-hole projects. It is s...
Gravity: Arduino Alcohol Sensor (MQ3)
An analogue alcohol gas sensor based on the MQ-3 probe, designed for use with Arduino and other microcontrollers. The sensor outputs a voltage proportional to the concentration of alcohol vapour in the surrounding air, making it suitable for breathalyser-style projects, air quality monitoring, an...
Small PCB Test Points (100 pack) - Red
Testing is an important step in board manufacturing. And it can be super tricky on a fully populated PCB. So how can you test connections when you have an assortment of components blocking your probe? These "mini loop type" Small PCB Test Points easily snap in to your proje...
