All Products
Collections
Showing 41-49 of 49 products · 11 unavailable products hidden
OCTOPUS OLED Display
Octopus Temperature And Humidity Sensor
Micro:bit Breadboard Adapter
Octopus Rain/Steam Sensor
Octopus Photo Interrupter Sensor
2.23inch OLED Display Module for Raspberry Pi Pico, 128×32, SPI/I2C
ELECFREAKS Smart Home Material Pack
VL53L1X Time of Flight (ToF) Sensor Breakout
6+1 Microphone Array
OCTOPUS OLED Display
OCTOPUS OLED Display is an OCTOPUS series electric brick with 128X64 OLED display.OLED display has characters of thin thickness, high brightness, self-emission, wide resolution and visual angle, wide temperature range and low power consumption,etc..It can be used for small patterns, alphabets,...
Octopus Temperature And Humidity Sensor
Temperature and humidity sensor is a module based on DHT11 digital temperature and humidity sensing element. Simple design, and sensitive to the ambient temperature and humidity changes, it can be used for temperature alarm, humidity testing and other works.3P Octopus Bricks Interface，input 5V - ...
Micro:bit Breadboard Adapter
Micro:bit Breadboard Adapter is a breadboard pinboard based on Micro:bit. It can be directly plugged into breadboard. Through this adapter, you can start various DIY creation on Micro:bit Breadboard.Features:1. Fully compatible with Micro:bit board; 2. All Micro:bit connect ports can be corr...
Octopus Rain/Steam Sensor
This is a Rain/steam sensor from ElecFreaks. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up.You even could use it as a touch panel.
Octopus Photo Interrupter Sensor
Photo Interrupter Sensor is a sensor module based on ITR9608 photoelectric switch, together with special Arduino shield in use. It has been widely used in parts counting, motor speed and so on. Three pins electronic building blocks interface, input 5V - GND, S for digital signal output.
2.23inch OLED Display Module for Raspberry Pi Pico, 128×32, SPI/I2C
A 2.23″ monochrome OLED display module designed to plug directly onto the Raspberry Pi Pico via the onboard female pin header. The SSD1305 driver supports both 4-wire SPI and I2C interfaces, giving you flexibility in how you connect. Waveshare provides ready-to-use C/C++ and MicroPython example c...
VL53L1X Time of Flight (ToF) Sensor Breakout
The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for proximity sensing, presence detection, and collision avoidance on robots. This b...
6+1 Microphone Array
A 6+1 MEMS microphone array built around seven MSM261S4030H0 high-sensitivity digital silicon microphones. Designed for advanced audio applications including noise suppression, echo cancellation, reverb reduction, and sound source localisation. The array outputs raw digital audio over I2S, elimi...
