All Products

SKU: AF-3405

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: DF-FIT0505

A 2.4 GHz omni-directional antenna with 6 dBi gain and an IPEX MHF1 connector, providing strong WiFi signal reception and transmission. The 15 cm cable makes it easy to position the antenna away from the board for optimal placement. Key Features 6 dBi Gain – High gain for extended wireless ran...

SKU: DF-DFR0015

An XBee-compatible shield for Arduino that supports a wide range of wireless communication modules including ZigBee, WiFi, and Bluetooth 2.0/4.0 bee-format boards. Stacks directly onto Arduino Uno, Leonardo, or Mega, with a built-in 5 V to 3.3 V level converter for safe interfacing with 3.3 V mod...

SKU: AF-3436

The Adafruit Music Maker FeatherWing with Amplifier brings powerful audio playback to any Feather board. Built around the VS1053B codec chip, it decodes a wide variety of formats including MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, and WAV — and includes an on-board 3W class-D stereo amplifier so you...

SKU: AF-3428

A voltage detector is handy for projects where you want to make sure your microcontroller doesn't run at a low voltage. For example, say you have a Feather Huzzah running on a lipoly battery every few minutes. Eventually the battery runs down, and goes below 3.3V, so the voltage to the ESP8266...

SKU: AF-3357

The Adafruit Music Maker FeatherWing turns any Feather board into a versatile audio player and MIDI synthesiser. Powered by the VS1053B codec chip, it decodes MP3, AAC, Ogg Vorbis, WMA, FLAC, WAV, and MIDI formats, with digital bass, treble, and volume controls — all over a lightweight SPI interf...

SKU: AF-3325

MicroPython is a tiny open-source Python programming language interpreter that runs on microcontroller, originally written by Damien George (http://micropython.org/). With MicroPython you can write clean and simple Python code to control hardware instead of having to use complex low-level lang...

SKU: AF-3232

Add long-range LoRa radio to any Feather board with the Adafruit LoRa Radio FeatherWing. Built around the SX127x LoRa module, this add-on provides kilometre-range packet radio communication at 433 MHz — perfect for sensor networks, remote monitoring, and bridging to the Internet via a WiFi or cel...

SKU: AF-3231

Add long-range LoRa radio to any Feather board with the Adafruit LoRa Radio FeatherWing. Built around the SX127x LoRa module, this add-on provides kilometre-range packet radio communication at 900 MHz (tuneable to 868 MHz or 915 MHz) — perfect for sensor networks, remote monitoring, and bridging ...

SKU: AF-3133

The Adafruit Ultimate GPS FeatherWing brings precise, low-power GPS to the Feather ecosystem. Built around the MTK3339 chipset, it tracks up to 22 satellites on 66 channels with -165 dBm sensitivity and delivers up to 10 position updates per second — all while drawing only 20 mA. Simply plug the...

SKU: SF-DEV-13907

The SparkFun ESP32 Thing is a comprehensive development platform for Espressif’s ESP32, their super-charged version of the popular ESP8266. Like the 8266, the ESP32 is a WiFi-compatible microcontroller, but to that it adds support for Bluetooth low-energy (i.e BLE, BT4.0, Bluetooth Smart), and...

SKU: AF-2945

The NeoPixel FeatherWing adds a 4×8 matrix of 32 individually addressable RGB LEDs to any Adafruit Feather board. Using Feather stacking headers or female headers, the wing connects directly on top or bottom of your Feather for a compact, colourful display. Only one pin is required to control al...

SKU: AF-1463

Round and round they go! 16 ultra-bright smart RGB NeoPixels are arranged in a circle with a 44.5 mm (1.75″) outer diameter. Each LED is individually addressable from a single microcontroller pin, delivering 24-bit colour with ~18 mA constant-current drive for consistent brightness regardless of ...

SKU: AF-1487

Put on your sunglasses before wiring up this LED matrix — 64 eye-blistering RGB LEDs adorn the NeoPixel NeoMatrix for a blast of configurable colour. Arranged in an 8×8 matrix, each pixel is individually addressable with just one microcontroller pin, delivering 24-bit colour (8-bit PWM per channe...

SKU: AF-1643

Round and round they go! 12 ultra-bright smart RGB NeoPixels are arranged in a compact circle with a 37 mm (1.5″) outer diameter. Each LED is individually addressable from a single microcontroller pin, delivering 24-bit colour with ~18 mA constant-current drive for consistent brightness regardles...

SKU: AF-1586

Round and round they go! 24 ultra-bright smart RGB NeoPixels are arranged in a circle with a 66 mm (2.6″) outer diameter — the largest in the NeoPixel Ring family. Each LED is individually addressable from a single microcontroller pin, delivering 24-bit colour with ~18 mA constant-current drive f...

SKU: AF-3022

Paper Signals is an open source project that lets you make little voice-controlled objects that track simple things, like the weather. You can build any of the example Paper Signals Google has on g.co/papersignals. Or, grab the code on GitHub and create something of your own. To make one, you’...

SKU: AF-3619

Aww yeah, it's the Feather you have been waiting for, and now with stacking headers! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer c...

SKU: DF-SEN0248

DFRobot BME680 Environmental Sensor is a low power gas, pressure, temperature & humidity sensor based on BOSCH BME680 sensor. It is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatile Organic Compounds) sensor, temperature sensor, humidity sensor and barometer. ...

SKU: AF-3980

The Adafruit IO+ 1 Year Subscription Card gives you a full year of Adafruit IO+ service — Adafruit's cloud platform for streaming, logging, and interacting with IoT data. Simply enter the code on the back of the card into your Adafruit IO account to activate your subscription. Adafruit IO+ unloc...