All Products

SKU: DF-DFR0600

PYNQ-Z2 is a FPGA development board based on ZYNQ  XC7Z020 FPGA, intensively designed to support PYNQ, a new open-sources framework that enables embedded programmers to explore the possibilities of xilinx ZYNQ SoCs without having to design programming logic circuits. Benefiting from progr...

SKU: AF-4187

A triangle-shaped momentary pushbutton with a built-in LED, giving your control panels a distinctive retro sci-fi aesthetic. The LED and switch contacts are electrically independent, so you can control illumination separately — light it when pressed, when not pressed, always on, or always off. T...

SKU: AF-5844 · MPN: ADA5844

The RJ-12/RJ-11 Telephone Round Panel Mount Extension Cable provides a simple way to add a panel-mount telephone connection to project enclosures. The round panel-mount design fits a standard drilled hole of approximately 30 mm — no custom oval or square cutouts required. Unscrew the plastic nut...

SKU: AF-4261

A round panel-mount USB-C pass-through adapter that lets you add a USB-C port to any enclosure using a simple drilled hole — no custom oval or square cutouts required. At approximately 30mm diameter, a standard hole saw or drill bit is all you need. Both sides feature a USB-C jack with full pass...

SKU: AF-6070 · MPN: ADA6070

If you need to add a panel-mount connection that extends a micro SD card, this Round Panel Mount MicroSD Adapter Plug is the easiest and fastest way to panel-ify your project. The adapter is about 30mm in diameter, so you can drill a hole in your wood, plastic or metal with a common hole-saw or b...

SKU: AF-4212

If you need to add a panel-mount connection for USB B, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or metal wi...

SKU: AF-6116 · MPN: ADA6116

USB C to USB B Round Panel Mount AdapterNeed a panel-mount USB C connection but don't want the hassle of cutting custom shapes? This USB C plug to USB B socket adapter makes it easy! With a 30mm diameter, you can simply drill a round hole using a standard hole saw or drill bit—no complex cutting ...

SKU: AF-4052

This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB A plug connector, and other is a USB C socket with special over-molding. What's...

SKU: AF-5703

The Adafruit PiCowbell Adalogger is a Pico-sized add-on board that sockets underneath your Raspberry Pi Pico or Pico W, adding a microSD card slot, real-time clock with battery backup, and a STEMMA QT connector for I2C sensors — everything you need for data logging projects. The PCF8523 RTC keep...

SKU: AF-5849 · MPN: ADA5849

Incredibly tiny 1111-size (1.1mm × 1.1mm) individually addressable RGB NeoPixel LEDs for creating ultra-compact or high-density smart LED designs. These are the same integrated LED technology used in NeoPixel strips and pixels, but at a fraction of the size — 20× smaller than standard 5050 NeoPix...

SKU: AF-4218

If you need to add a panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this USB C Round Panel Mount Extension Cable is the easiest and fastest way to panel-ify your project. The adapter is about 30mm in diameter, so you can drill a hole in your wood, p...