All Products

SKU: SF-WRL-24738 · MPN: WRL-24738

This UHF RFID reader brings long-range, multi-tag RFID reading and writing to embedded projects, desktop testing and inventory-style applications. Built around the JADAK M7E Hecto module, it works with standard EPCglobal Gen 2 passive UHF tags.The board can read many tags at once, making it usefu...

SKU: AF-4473

As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still totin' around a USB Type A hub, computer or laptop.USB C is the latest industry-standard connector for transmitting data and power. Like Light...

SKU: AF-4844

This ordinary-looking USB cable actually has a surprise trick up its rubber sleeve. It's kinda like a 'miniature KVM' (minus the video part, and only one USB port). The mechanical switch connects to the D+ and D- pins on the two USB A host ports. So when you switch back and forth, the USB pe...

SKU: EC-AP0500STK

AVRISP2.0 STK500 programmer help you download your codes into your controller or bootloader to your Arduino board, it communicates with PC via USB port, and it works with most of PC & notebook computers.Features It can support a wide range of ATMEL AVR microcontroller. It can works with AVR Studi...

SKU: AF-5216

If you have a USB Type C port on your computer over here and you want to connect something over there then this extension cable will do the job right quick!This cable is 2 meters long, with all the pins connecting from one side to the other.

SKU: AF-1827

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY USB-A Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a mode...

SKU: AF-592

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or microcontroller Approximately 3 feet / 1 meter long

SKU: AF-4216

If you need to add a panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this USB B Round Panel Mount Extension Cable is the easiest and fastest way to panel-ify your project. The adapter is about 30mm in diameter, so you can drill a hole in your wood, p...

SKU: AF-973

A 50 cm (19.5″) servo extension cable for extending the reach of standard 3-pin servo connections. It features a shrouded male connector on one end and a female connector on the other, with red/black/white colour coding maintained throughout. Specifications Connector – 3-pin servo (male to fem...

SKU: SF-CAB-15464

This panel mount USB micro-B extension cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 16.5mm apart.

SKU: SF-CAB-15455

This panel mount USB-C extension cable enables you to more easily enclose a project that contains a USB-C port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 18mm apart.

SKU: DF-FIT0033

A 300 mm (11.8″) servo extension cable for when your servo needs to reach further than its built-in lead allows. Male connector on one end plugs into your controller, female connector mates with the servo. Also works as a simple 0.1″ pitch jumper cable. Specifications Length – 300 mm (11.8″) ...

SKU: AF-62

This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP (among other things).3 feet / 1 meter longColor may vary!

SKU: AF-6412 · MPN: ADA6412

We accidentally got these cables that were supposed to be assembled into Slim HDMI cables - but obviously are missing the actual connectors. So we're putting them on clearance since they might be useful for some builds that need 19 conductors (4 straight conductors plus 5 sets of 3-wire twisted t...

SKU: AF-616

Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to extend the reach of EL wire, panel, tape, etc. The cable is a meter long, you can of course snap more together if necessary, or cut and re-solder it...

SKU: SF-CAB-11301

A 6-foot (1.8 m) USB 2.0 cable with a Type-A plug on one end and a Mini-B 5-pin plug on the other. Use it to connect cameras, USB hubs, FTDI programmers, LiPo chargers, and other devices that use the Mini-B connector. Specifications Connector A – USB Type-A (male) Connector B – USB Mini-B 5-p...

SKU: SF-CAB-10649

A 3-foot (approximately 90 cm) length of 10-wire ribbon cable. Useful for making clean, organised multi-conductor connections in electronics projects — ideal for connecting to IDC crimp-on connectors. Specifications Conductors – 10 wires Length – 3 feet (~90 cm) Type – Flat ribbon cable

SKU: AF-5220

If you have a USB Type C port on your computer over here and you want to connect something over there then this extension cable will do the job right quick!This cable is 1 meter long, with all the pins connecting from one side to the other.

SKU: DF-DFR0225

RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benefits from the Arduino open source platform, it is supported by thousands of open source projects, and can easily be expanded with Arduino Shields. The ...

SKU: DF-FIT0860

This small portable USB isolator with USB2.0 compatibility provides complete isolation between devices.  Featuring a 12Mbps data transmission rate and 2500V isolation voltage, the industrial USB isolator can be used to protect the USB port of all kinds of devices without connecting exter...