All Products

SKU: AF-5857 · MPN: ADA5857

These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Bi-Metal Gearbox Motor with a gear ratio of 1:90, about double the 'standard' 1:48 ratio. That gives them higher torque but slower rotational speed. Si...

SKU: AF-1449

A plastic-geared micro servo with an extra trick — a fourth wire brings out the internal potentiometer feedback signal, letting you read the servo's actual position via an analog input. This feedback capability enables motion recording, playback, and improved stability in robotics applications. ...

SKU: PL-3434

This is a full set of replacement gears for the Power HD High-Torque Servo 1501MG.

SKU: AF-3801

These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Bi-Metal Gearbox Motor with a gear ratio of 1:90 about double of the 'standard' 1:48 ratio. That gives them higher torque but slower ...

SKU: DF-FIT0457

INTRODUCTION This motor has a long (0.365"/9.27 mm) D profile metal output shaft that matches the 42x19mm and 32x7mm dimensions of the Pololu wheel. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6mm diameter, 0.35mm thread pitch), or you can ...

SKU: LB-LS0667

This 55-piece plastic gear pack contains an assortment of gears in various sizes and tooth counts for building custom drive trains, mechanical linkages, and DIY motorised projects. Pair them with a small DC motor to create gear reduction systems, conveyor mechanisms, or simple robotic drives. Ke...

SKU: LB-LS1017-280

The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. Running at 280 RPM, it provides a good balance of speed and torque for small robotics and automation projects. Key Features Built-In Speed Encoder – Real-time speed feedback for P...

SKU: PL-1125

A compact, inexpensive brushed DC motor with a 120:1 plastic reduction gearbox, well suited for small robot builds. The motor is rated for 4.5V but runs comfortably in the 3–6V range. The gearbox output shaft is a 3mm D-shape, offset from and parallel to the motor shaft. A built-in safety clutch ...

SKU: LB-LS1017-60

The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. This 60 RPM variant uses a higher gear ratio for increased torque at lower speed, making it well-suited for applications that need precise, controlled movement. Key Features Built...

SKU: AF-3815

But what do you do when you want to add LEGO-compatible bricks and parts to your robotics project? This is the bracket you need! Just push onto the body of your DC Gearbox "TT" motor, secure with screws, and it's ready to adapt to the standard LEGO-compatible parts. So easy, we think this...

SKU: DF-FIT0467

INTRODUCTION This motor has a long (0.365"/9.27 mm) D profile metal output shaft that matches the 42x19mm and 32x7mm dimensions of the Pololu wheel. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6mm diameter, 0.35mm thread pitch), or you can ...

SKU: DF-FIT0495-H

This is a metal DC geared motor, 34:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 1 kg.cm. It is stable and durable! SPECIFICATIONS Rated Voltage: 6 V Operating Voltage Range 2~7.5V Gear reduction ratio: 34:1 Gearbox lengt...

SKU: PL-1576

A high-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gearbox face plate. Also available with an integrated encoder for closed-loop contro...

SKU: DF-FIT0186

This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 700 counts per revolution of the gearbox's outp...

SKU: PL-1121

A 120:1 plastic gearmotor with a 90° output shaft — the output is perpendicular to the motor axis, making it a compact choice for small robot designs where side-mounted wheels or mechanisms are needed. The enclosed gearbox and low-current brushed DC motor run on 3–12V, with a built-in safety clut...

SKU: PL-1120

A 200:1 plastic gearmotor with a 90-degree output shaft, offering a compact and affordable solution for small robot designs. The low-current brushed DC motor is well-suited for use with common motor drivers, and the recommended operating voltage range is 3–12V. The gearbox is fully enclosed and ...

SKU: SF-ROB-12316

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 30:1 and operate up to 12 volts and have a stall torque of 9 oz-in. and a max speed of 900 RPM. Each micro gearmotor sports a 3mm D-shaft. Note: The micro gearmotor enclosures are sold separate...

SKU: LB-LS0112-280

The JGA25-370 is a compact 12V DC gear motor with metal gears, delivering 280 RPM at 12V. This variant does not include a speed encoder, making it a simpler and more affordable option for projects that don't require closed-loop feedback. Key Features 280 RPM – At 12V nominal voltage Metal Gea...

SKU: WS-31391 · MPN: 31391

Ensure that your mechanical projects are powered with precision and durability by integrating the WP5320/WP5335 Large Torque 180° Digital Servo. This robust and high-performance servo is designed to provide exceptional control and strength for your most demanding applications. Product Descri...

SKU: SF-TOL-12891

A compact precision screwdriver set with seven interchangeable chrome vanadium bits, designed for working on electronics, small devices, and hobby projects. The anodized aluminium body features a knurled finger grip for controlled, precise turning. Bits store neatly inside the hollow screwdriver...