All Products

SKU: AF-6358 · MPN: ADA6358

Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the active3 pinout, so it can handle roughly three times as many panels or pixels as...

SKU: AF-2279

The 64×32 RGB LED Matrix Panel with 3mm pitch features 2048 bright RGB LEDs in a 192×96mm panel. With tighter pixel spacing than 4mm and 5mm variants, this panel delivers sharp images for indoor viewing at moderate distances. The panel features two IDC connectors on the back (input and output) f...

SKU: AF-2276

The 64×32 RGB LED Matrix Panel with 6mm pitch features 2048 bright RGB LEDs in a 384×192mm panel. The widest pixel spacing in the 64×32 range, this panel is designed for viewing from the greatest distance, making it ideal for large signage and displays viewed across a room or further. The panel ...

SKU: LB-LS0014

Check out these big 10mm through-hole LEDs! The clear epoxy package causes these LEDs to have a bright glow. Features: Forward Voltage (R/G/B): 2.0 / 3.2 / 3.1V Forward Current: 20mA Intensity (R/G/B): 550 / 250 / 700 mcd Common Cathode This is a bag of 20 RGB LEDS

SKU: SF-LCD-29766 · MPN: LCD-29766

Add a bright 2.8-inch colour display to your Raspberry Pi Pico project with this Pimoroni display pack. It uses a 320×240 pixel IPS LCD driven by an ST7789V controller, giving you a generous active screen area for menus, status displays, dashboards and simple graphics.The board includes four tact...

SKU: AF-714

This new Adafruit shield makes it easy to use a 16x2 Character LCD. We really like the RGB LCDs we stock in the shop both the RGB negative and RGB positive. Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then another 3 to control the RGB backlight for a...