All Products

SKU: DF-DFR0477

The Realtek Ameba RTL8195AM is an IoT microcontroller module that combines a 32-bit ARM Cortex-M3 MCU (166 MHz) with Wi-Fi 802.11 b/g/n and NFC (Near Field Communication) on a single chip. It supports Arduino and MicroPython programming, making it accessible for rapid IoT prototyping and developm...

SKU: AF-2308

A 100 mm (4″) flexible WiFi antenna with approximately 4 dBi gain and a U.FL (IPEX) connector. The flexible design lets you bend and position the antenna to suit your enclosure or project layout, while the U.FL connector snaps directly onto boards without the need for an adapter. Key Features ...

SKU: EF-EF03089

A compact wireless charging module consisting of a transmitter and receiver coil pair, providing stable 5 V output with up to 600 mA current. Designed for close-range wireless power transfer in electronics projects where physical connectors are impractical. The insulated coils support a transmit...

SKU: DF-SEN0337

TOF Sense is a TOF-based (Time of Flight) laser ranging sensor that offers 1cm-5m detection range, 1mm resolution, ± 1.5cm error, and 10Hz data update frequency. The sensor supports 15 ° ~ 27 ° adjustable FOV, UART and CAN communication (selected by setting). Besides, it allows users to actively ...

SKU: DF-SEN0704 · MPN: SEN0704

This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-time pressure distribution mapping instead of a single force reading.The bendable ...

SKU: DF-DFR0362

Wireless charging uses an electromagnetic field to transfer energy between two objects. This is usually done with a charging station. Energy is sent through an inductive coupling to an electrical device, which can then use that energy to charge batteries or run the device. This is a new...

SKU: SF-WRL-22627

XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and pr...

SKU: DF-TEL0116

A long-range, low-data-rate radio modem pair based on the Semtech SX1276 LoRa transceiver. Operating on the 433 MHz ISM band, these modules deliver robust wireless links with excellent sensitivity and low power consumption — ideal for remote sensing and IoT applications. The modules support two ...

SKU: SF-WRL-17389

This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The “duck” style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite desirable if you’re working in industrial environments or other places a Compute Module would be u...

SKU: DF-DFR0743-WROVER

The ESP32-S2-WROVER is a Wi-Fi MCU module built around the ESP32-S2 chip with 4 MB SPI flash and 2 MB PSRAM. The additional PSRAM makes it well suited for applications requiring larger data buffers, such as audio and video processing. Based on the Xtensa single-core 32-bit LX7 CPU running at up ...

SKU: EC-CBL37551BE

The Elecrow Bluetooth Bee is a Bluetooth V2.0+EDR serial module in an XBee-compatible form factor. It provides transparent wireless serial communication at up to 2.4 GHz, making it easy to add Bluetooth connectivity to any project with an XBee socket — no additional wiring required. Based on the...

SKU: SF-WRL-13624 · MPN: WRL-13624

The RN-52 is a compact wireless audio module designed to make high quality stereo audio streaming easier to add to embedded projects. It suits hands-free car audio, remote media centre control, and 2-channel audio streaming applications.Configuration and control are handled with a simple ASCII co...

SKU: SF-COM-00535

Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability. Low profile HC49/US Package.

SKU: WS-30619 · MPN: 30619

The Luckfox Pico Pi is a compact Linux micro development board powered by the Luckfox Core1106 processor. With 8 GB eMMC on-board storage, built-in Wi-Fi 6, Bluetooth 5.2/BLE, and a self-developed ISP3.2 image signal processor supporting up to 5 MP camera input, it is well suited for embedded vis...

SKU: DF-KIT0222 · MPN: KIT0222

This kit bundles the HUSKYLENS 2 edge AI vision sensor with the HUSKYLENS 2 WiFi Module and HUSKYLENS 2 Wide-angle Camera Module, giving robotics and maker projects on-device visual recognition plus wireless interaction. It is designed to help users build AI vision applications without setting up...

SKU: DF-SEN0557

This high-sensitivity 24GHz human presence sensing radar module utilizes FMCW (frequency-modulated continuous wave) to detect human targets in the set space. Combined with radar signal processing and accurate human sensing algorithm, it can achieve high-sensitivity sensing of human presence statu...

SKU: SF-COM-09378

Atmel’s itty-bitty ATtiny85 8-Bit Processor. 8K of program space, 6 I/O lines, and 4-channel 10 bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. Documents: Product Card Arduino Board Definitions

SKU: LB-LS1216

This sensor is composed of an infrared emitter on one upright and a shielded infrared detector on the other. By emitting a beam of infrared light from one upright to the other, the sensor can detect when an object passes between the uprights, breaking the beam. Used for many applications includin...

SKU: EF-EF08296