All Products

SKU: SF-LCD-16398

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by including an ATmega328P that handles all of th...

SKU: SF-LCD-16396

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by including an ATmega328P that handles all of th...

SKU: DF-FIT0127

Standard 16x2 character LCD display. It has a basic 16 character by 2 line display with a blue background with white characters. You could get a compatible LCD pannel or IIC LCD backpack here. SPECIFICATIONS Supply voltage:5V DOCUMENTS Datasheet SHIPPING LIST 16x2 Character LCD...

SKU: SF-LCD-16397

The SparkFun 16×2 SerLCD is a serial-enabled LCD that provides a simple, cost-effective way to add an RGB-on-black liquid crystal display to your project. An on-board ATmega328P microcontroller handles all screen control, eliminating the need for a separate backpack board. The display supports t...

SKU: DF-FIT0128

Standard 16x2 character LCD display. It has a basic 16 character by 2 line display with a yellow background with black characters. You could get a compatible LCD pannel or IIC LCD backpack here. SPECIFICATIONS Supply voltage:5V DOCUMENTS Datasheet ...

SKU: AF-1365

A simple acrylic stand that holds a 16×2 character LCD upright on your desk. Made from 3 mm black acrylic with nylon mounting hardware, it assembles quickly and gives your display a clean, professional look. Designed specifically for 16×2 USB/Serial backpack LCDs. Other 16×2 displays (OLED or RG...

SKU: DF-DFR0063

This is an 16x2 LCD display screen with with I2C interface. It is able to display 16x2 characters on 2 lines, white characters on blue background. Usually, Arduino LCD display projects will run out of pin resourceseasily, especially with Arduino Uno. And it is also very complicated with the wi...

SKU: AF-1427

The Adafruit 16×8 LED Matrix Driver Backpack is a breadboard-friendly breakout for the HT16K33 multiplexed LED driver. Unlike the pre-configured LED backpacks, this version breaks out all 16 anode and 8 cathode pins, letting you wire up any LED matrix configuration you need — up to 128 individual...

SKU: PR-PIM094

This is the lovely little 16 x 3 character LCD we use on Display-O-Tron.A super-slim alternative to the classic industrial character displays. This model has a transparent display allowing you to add your own back-light if you wish! High-contrast LCD display 3 x 16 characters (3.6mm character hei...

SKU: DF-DFR0936

This shield with a 16×2 RGB LCD screen could bring you a brand-new experience with an LCD screen!The RGB LCD shield extends all IOs of Arduino UNO on the back, by which you can connect with modules like sensors, LEDs, and servos while using this screen to display content. More possibilities for y...

SKU: DF-DFR0514

This is a 2*16 character RGB LCD+Keypad plate for Raspberry Pi. We made improvements in the wiring connection based on the previous LCD display as well as left out the contrast adjustment function, so the product can be pretty easy to use, and users can spend time focusing on the most important p...

SKU: AF-2264

The Adafruit FT232H Breakout turns your computer into a versatile interface for hardware protocols. Using the FTDI FT232H chip with its multi-protocol synchronous serial engine, you can communicate directly with I2C, SPI, JTAG, and serial UART devices — plus read and write digital GPIO pins — all...

SKU: AF-6366 · MPN: ADA6366

This compact ePaper module is designed for adding a small, paper-like display to your electronics project. It features a 2.13-inch quad-colour panel with a 250 x 122 pixel resolution and on-board SRAM.2.13-inch eInk/ePaper display250 x 122 pixel resolutionQuad-colour panelIncludes SRAMIt’s a prac...

SKU: WS-19750

A 2.23″ monochrome OLED display module designed to plug directly onto the Raspberry Pi Pico via the onboard female pin header. The SSD1305 driver supports both 4-wire SPI and I2C interfaces, giving you flexibility in how you connect. Waveshare provides ready-to-use C/C++ and MicroPython example c...

SKU: AF-5400

The Adafruit ESP32 Feather V2 is a major redesign of the original HUZZAH32 ESP32 Feather, featuring 8 MB flash, 2 MB PSRAM, USB-C, a STEMMA QT port, a NeoPixel, and a user button. The dual-core ESP32 at 240 MHz provides Wi-Fi and Bluetooth Classic/LE connectivity for wireless and IoT projects. D...

SKU: AF-2719

If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one turned on or off by the ...

SKU: AF-4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: SF-LCD-11377

The µLCD-144-G2 (GFX) is a compact 1.44" colour LCD module with an embedded GOLDELOX-GFX2 graphics processor. It delivers standalone graphics capability — draw lines, circles, text, display images, animations, and video clips — all programmable in 4DGL, a high-level graphics language with syntax ...