All Products

SKU: WS-31551 · MPN: 31551

Responsive and Robust: The Industrial HMI All-in-one Touch Display for Raspberry PiUnleash the full potential of your Raspberry Pi with our Industrial HMI All-in-one Touch Display. Designed to accommodate the latest Raspberry Pi modules, this display is the go-to solution for all your industrial ...

SKU: WS-19653

This 0.96″ LCD Display Module is designed to plug directly onto a Raspberry Pi Pico via its onboard female pin header — no soldering or breadboard required. The 160×80 IPS panel delivers 65K RGB colours with wide viewing angles, driven by the ST7735S controller over SPI. Beyond the display, the ...

SKU: WS-25269 · MPN: 25269

This 7" IPS capacitive touchscreen from Waveshare connects to the Raspberry Pi via the DSI interface for a driver-free, plug-and-play experience. Featuring 800×480 resolution, 5-point multi-touch on toughened glass, and a 170° wide viewing angle, it delivers responsive touch interaction with clea...

SKU: WS-19888

The Waveshare Pico-LCD-2 is a 2-inch IPS LCD display module designed to plug directly onto a Raspberry Pi Pico via its onboard female pin header. With 320×240 resolution and 65K RGB colours, it delivers clear, vibrant visuals for your Pico projects. The module uses an SPI interface requiring min...

SKU: DF-DFR1054

ESP32-C6-DevKitC-1 is an entry-level development board based on ESP32-C6-WROOM-1, a general-purpose module with an 8 MB SPI flash. This board integrates complete Wi-Fi, Bluetooth LE, Zigbee, and Thread functions. Most of the I/O pins are broken out to the pin headers on both sides for easy interf...

SKU: WS-25270

A 7-inch IPS capacitive touchscreen display with a DSI interface, designed for Raspberry Pi. Features 800×480 resolution, 170° wide viewing angle, and 5-point touch with a toughened glass panel (6H hardness). Available with an optional ABS case for Pi 4B. Driver-free on Raspberry Pi OS with full...

SKU: AF-2719

If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one turned on or off by the ...

SKU: LB-LR0120

This 5-inch HDMI TFT LCD touch screen plugs directly onto a Raspberry Pi via the GPIO header and HDMI connector, providing an 800×480 resolution display with SPI-based touch input. It draws power from the Pi's GPIO pins, so no separate power supply is needed. The display connects via HDMI for vi...

SKU: EC-CRV00113L

CrowView is a portable 14" dual monitor that clips directly onto your laptop screen. The mechanical clamp fits 13"–16.5" laptops, expanding your workspace without cables cluttering your desk. With 230° rotation, configure it for any viewing angle. Key Features 14" IPS Display – 1920×1080 resol...

SKU: DF-DFR0528

DFRobot UPS HAT is an uninterruptable power supply shield designed for the Raspberry Pi Zero series, and also compatible with Pi 2/3/A+. The UPS HAT can continue to provide power to the Raspberry Pi for a certain period of time when the system is powered off, by which to avoid system damage and a...

SKU: PR-PIM094

This is the lovely little 16 x 3 character LCD we use on Display-O-Tron.A super-slim alternative to the classic industrial character displays. This model has a transparent display allowing you to add your own back-light if you wish! High-contrast LCD display 3 x 16 characters (3.6mm character hei...

SKU: LB-LS3938

This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...

SKU: SF-DEV-14134

The Arduino Industrial 101 is a compact WiFi evaluation board based on the Arduino 101 LGA module. Combining an ATmega32U4 microcontroller with an Atheros AR9331 MIPS Linux processor, it provides a powerful platform for IoT projects without the need for multiple shields. Similar to the Arduino Y...