All Products

SKU: SF-PRT-10450

Standard Philips-head 4-40 screws. They are 1" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SKU: SF-PRT-10453

There are your standard Philips-head 4-40 screws. They are ¼" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SKU: PL-1960

Steel zinc-plated pan-head Phillips machine screws, #4-40 thread, ¼" (6.35mm) long. Sold in a pack of 25. Ideal for securing PCBs, standoffs, and enclosures in electronics projects. Specifications Thread: #4-40 Length: ¼" (6.35mm) Head Type: Pan-head, Phillips drive Material: Steel, zinc-pl...

SKU: SF-PRT-10738

These metal hex standoffs raise your development board or proto board off the work surface for protection and airflow. With a #4-40 thread, they fit most boards with standard mounting holes. Specifications Length: 1″ (25.4 mm) Outer Diameter: ¼″ (6.35 mm) Thread: #4-40 Material: Metal Pac...

SKU: SF-DEV-17723

The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This board also features two Qwiic connectors and four 4-40 screw inserts to connect and...

SKU: SF-DEV-17724

The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This board also features two Qwiic connectors and eight 4-40 screw inserts to connect an...

SKU: DF-FIT0270

A 10-pack of M3 × 10mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...

SKU: DF-FIT0294

A 10-pack of M3 × 6mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (All...

SKU: DF-FIT0280

A 10-pack of M3 × 12mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...

SKU: DF-FIT0281

A 10-pack of M3 × 25mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...

SKU: DF-FIT0273

A 10-pack of M3 × 16mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...

SKU: DF-FIT0274

A 10-pack of M3 × 20mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...

SKU: SF-PRT-10454

Standard 4-40 zinc-plated hex nuts. A common thread size used in electronics enclosures, PCB mounting, and small hardware assemblies. Specifications Thread Size – 4-40 (UNC) Material – Zinc-plated steel Quantity – 10 pack

SKU: SF-PRT-10789

Non-conductive nylon nuts in the 4-40 thread size. Ideal for securing PCBs and electronics without the risk of shorting traces or ground planes around mounting holes. Specifications Thread Size – 4-40 Material – Nylon Conductive – No (electrically insulating) Package Contents 10× Nylon Nu...

SKU: AF-5739

You can now attack just about every kind of box or enclosure that needs undoing with this Right Angle Phillips Head and Flat Head Screwdriver Kit. These right angled screwdrivers are ideal when you want something that's a cross between a regular driver and an allen wrench. Especially when there's...

SKU: DF-FIT0269

A 10-pack of M3 × 30mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...

SKU: SF-PRT-10463

Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10

SKU: SF-PRT-10462

Nylon standoffs for mounting PCBs in enclosures or elevating boards off work surfaces. These ¾" (19mm) long standoffs are tapped for 4-40 screws and sold in a pack of 10. Key Features Nylon Construction – Non-conductive, won't short circuit boards 4-40 Thread – Standard tapping for 4-40 screw...

SKU: SF-KIT-22197

This GNSS Antenna Mounting Hardware Kit gives all of the basic parts you'll need to mount your antenna to a structure or support. We love to use this kit to secure one of our two GNSS Multi-Band Antennas (either the SPK6618H or the TOP106) that allow for tri-band (L1/L2/L5) reception for GPS, GLO...

SKU: SF-PRT-11796

These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. Sold in packs of ten. Check below for matching screws.