All Products
Showing 1-20 of 40 products · 20 unavailable products hidden
Pi-DigiAMP+
The IQaudIO Pi-DigiAMP+ is a HAT-compliant DAC and amplifier board for the Raspberry Pi, combining a high-quality 24-bit/192 kHz DAC with a 2×20W Class D stereo amplifier on a single board. Based on the Texas Instruments TAS5756m chipset, it delivers full-HD audio quality with no soldering requir...
Picade X HAT USB-C
The Picade X HAT turns your Raspberry Pi into a retro arcade console by adding joystick and button inputs, a 3 W I2S DAC/amplifier for audio, and a safe power on/off system — all through a single HAT that powers your Pi via USB-C (no separate power supply needed). Female Dupont connectors make w...
Dual Phono Connector for pHAT DAC
A dual RCA phono connector designed to pair with the Pimoroni pHAT DAC for Raspberry Pi. Simply place it into the landing pads on the PCB and solder for a clean analogue audio output. Key Features Colour-Coded Channels – Red (right) and white (left) for easy identification Through-Hole Termin...
Qwiic MCP4725 12-Bit DAC Breakout
·
Generate a real analogue output from your microcontroller instead of relying on PWM. This MCP4725 breakout is a 12-bit Digital-to-Analogue Converter (DAC) that outputs precise voltage levels over an I2C/Qwiic connection.It is useful for projects that need smoother control signals, such as sound g...
HIFI DAC Audio Sound Card Module I2S interface for Raspberry Pi
A high-fidelity DAC expansion board for Raspberry Pi that delivers superior audio quality over the Pi's built-in 3.5mm output. Built around Texas Instruments' PCM5122 DAC chip, this board connects via the I2S interface and supports up to 384kHz sampling with 112dB dynamic range — ideal for buildi...
Gravity: GP8512: 1-Channel 15bit I2C to 0-2.5V/VCC DAC Module
·
##Introduction This is a 1-channel analog voltage output DAC module with I2C communication, 15-bit resolution, and 0.01% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal out...
DFRobot GP8630N 16-bit I2C/PWM to ±10V & 4-20mA DAC Module
·
This Gravity DAC module converts I2C or PWM digital signals into stable analogue voltage or current outputs for control and automation projects. Built around the GP8630N chip, it supports output modes such as ±10V, 0-5V, 0-10V and 4-20mA, with 16-bit resolution available in I2C mode.The symmetric...
Gravity: GP8501 2-Channel PWM to 0-2.5V/VCC DAC Module
·
##Introduction This is a 2-channel analog voltage output DAC module with PWM communication, 8-bit resolution, and 0.5% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal outpu...
Gravity: GP8503 2-Channel 12bit I2C to 0-2.5V/VCC DAC Module
·
##Introduction This is a 2-channel analog voltage output DAC module with I2C communication, 12-bit resolution, and 0.1% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal outp...
Pirate Audio: Headphone Amp for Raspberry Pi
The ultimate hackable headphone amp for your desk! Pirate Audio Headphone Amp for Raspberry Pi has an I2S DAC, headphone amplifier, high-res display, and playback control buttons.Build your own home-brew iPod Nano with Pirate Audio Headphone Amp! It's an all-in-one s...
Adafruit I2S Stereo Decoder - UDA1334A Breakout
·
The Adafruit UDA1334A I2S Stereo DAC Breakout converts digital I2S audio into clean stereo analogue line-level output. Built around the NXP UDA1334A, this versatile DAC supports 3.3V and 5V logic levels and works with MCLK-less interfaces like the Raspberry Pi — a built-in PLL generates the maste...
USB C to 3.5mm Audio Headphone Jack - Android Version
USB C to 3.5mm Audio Headphone Jack DAC Adapter OverviewThe USB C to 3.5mm Audio Headphone Jack DAC Adapter is your go-to solution for connecting traditional 3.5mm audio devices to modern USB-C devices without a headphone jack. Whether you're listening to music, taking calls, or using your favori...
Adafruit PCM5122 I2S DAC with Line Level Output - HW, I2C or SPI
·
The Adafruit PCM5122 I2S DAC delivers excellent stereo line-level audio with 112dB SNR and -93dB THD. Out of the box it works in hardware mode — just pipe I2S audio in with no MCLK or configuration needed. For advanced control, switch to I2C or SPI mode to access software volume, EQ, filtering, a...
Power Filter Board for Raspberry Pi 3B+/ 4B
This power filter board for Raspberry Pi integrates solid capacitors, ceramic capacitors, and tantalum capacitors in a parallel hybrid filtering configuration. It filters low, mid, and high-frequency power noise from your supply, delivering cleaner power to the entire system — particularly benefi...
Gravity: I2C 12-Bit DAC Module
The DFRobot Gravity 12-Bit I2C DAC Module is a compact digital-to-analogue converter based on the MCP4725 chip. It accurately converts digital values to precise analogue voltage signals, providing far cleaner output than PWM-based approaches from microcontrollers. With on-board EEPROM, the modul...
DAC Audio Decoder Board for Raspberry Pi 3B+/ 4B
Related Product: Raspberry Pi Power Filter BoardThis Raspberry Pi DAC Audio Decoder Board supports I2S/DSD/coaxial input, analog/coaxial/optical/I2S output, 384K/32Bit decoding function and unique DSD clock de-jitter.The audio decoder board supports decoding of I2S and DSD digital audio signals o...
Gravity GP8600 1-Channel I2C/PWM 16-bit DAC Module
·
This GP8600 module is a high-precision digital-to-analogue converter for connecting logic-level microcontrollers to industrial-style analogue control inputs. It accepts I2C or PWM signals and converts them for applications such as 0-5V, 0-10V and 4-20mA control.It is designed for automation and c...
Audio Stereo Decoder Module Board 3.3V - 5V
HS1891 DAC Module CJMCU-1334 UDA1334A I2S DAC Audio Stereo Decoder Module Board 3.3V - 5V Feature: This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. 3.3V - 5V logic levels and can process multiple different formats by setting tw...
Raspberry Pi 5 ARGON ONE V5 Case – Dual M.2 NVMe Slots, Cooling Fan
·
Transform into the digital age and refine your Raspberry Pi 5 setup with the technologically advanced ARGON ONE V5 Case – the ultimate protective enclosure that enhances both functionality and aesthetics! Crafted from high-quality aluminum alloy, this sophisticated case not only safeguards your R...
Adafruit I2S 3W Class D Amplifier Breakout - MAX98357A
·
The Adafruit MAX98357A I2S Class D Amplifier Breakout is an all-in-one digital audio solution that decodes I2S audio and amplifies it directly to a speaker — no separate DAC required. Delivering up to 3.2W into a 4Ω speaker, it's a compact and efficient way to add amplified sound to your Raspberr...
