All Products

SKU: ET-1734943

Description: This 1m Cat5 lead is perfect for all your Raspberry Pi networking needs.   Features: LEAD, CAT 5E, 1M, BLACK Connector Type A: RJ45 Plug Connector Type B: RJ45 Plug Cable Length - Imperial: 3.28ft Cable Length - Metric: 1m Jacket Colour: Black Cable Assembly Type: Network ...

SKU: ET-1734948

Description: This 5m Cat5 lead is perfect for all your (longer) Raspberry Pi networking needs. Features: LEAD, CAT 5E, 5M, BLACK Connector Type A: RJ45 Plug Connector Type B: RJ45 Plug Cable Length - Metric: 5m Jacket Colour: Black Cable Assembly Type: Network Cable Length: 5...

SKU: AF-5441

When you want a super skinny Ethernet / CAT-6 cable, this noodle-y UTP jumper is only 3mm thick at the center, so it can flex around enclosures easily. This cable is 1 meter long, comes in Adafruit black. CAT6 means it's great for Ethernet-based LANs and other data networks. U...

SKU: AF-5220

If you have a USB Type C port on your computer over here and you want to connect something over there then this extension cable will do the job right quick!This cable is 1 meter long, with all the pins connecting from one side to the other.

SKU: DF-FIT0855

This HDMI to RJ45 Ethernet Cable Extender consisting of a transmitter and a receiver is designed to synchronously transmit audio and video signals up to 30m with zero latency.The module supports HD 1080P video signal transmission.Gold plated HDMI interface, anti-oxidation, not easy to rust.No pow...

SKU: LB-LS1832

Create a USB powered device.  This 1 meter cable can be soldered to your project to provide 5v of power. 

SKU: AF-616

Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to extend the reach of EL wire, panel, tape, etc. The cable is a meter long, you can of course snap more together if necessary, or cut and re-solder it...

SKU: DF-FIT0116

This is a high quality Category 5 (CAT5) patch cables is the solution to your internetworking needs. DOCUMENTS Cat 5 Definition

SKU: AF-5443

When you want a super skinny Ethernet / CAT-6 cable, this noodle-y UTP jumper is only 3mm thick at the center so that it can flex around enclosures easily. This cable is 30cm long, about one imperial foot, comes in Adafruit black. CAT6 means it's great for Ethernet-based ...

SKU: ET-1734946

Description: This 3m Cat5 lead is perfect for all your Raspberry Pi networking needs.   Features: LEAD, CAT 5E, 3M, BLACK Connector Type A: RJ45 Plug Connector Type B: RJ45 Plug Cable Length - Metric: 3m Jacket Colour: Black Cable Assembly Type: Network Cable Length: 3m ...

SKU: AF-3892

For those who are fans of our silicone-covered wires, but are always looking to up their wiring game. We now have Silicone Cover Ribbon cables! These may look a lot like squid ink noodles, but they're not. The silicone-sheathed wire is super-flexible and soft, and it's also strong! Able to han...

SKU: SF-CAB-25070 · MPN: CAB-25070

This custom-designed OBD-II cable from Macchina functions as both a splitter and at about one meter (~39 inches) in length, as an OBD-II extension cable. Unlike other cables out there, all 16 pins connected between each connector, eliminating troubleshooting headaches. We’re confident you’ll find...

SKU: AF-3889

For those who are fans of our silicone-covered wires, but are always looking to up their wiring game. We now have Silicone Cover Ribbon cables! These may look a lot like squid ink noodles, but they're not. The silicone-sheathed wire is super-flexible and soft, and it's also strong! Able to handle...

SKU: LB-LS4548

A standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector, there's a right angle bend. We thought this might make a good pair for a Raspberry Pi Model A or B as the cable doesn't stick out as far or the Micro:bi...

SKU: SF-CAB-09556

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The lea...

SKU: AF-2143

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 1 meter long. We have cables ...

SKU: AF-608

Connect two HDMI devices together with this basic HDMI cable. It has nice molded grips for easy installation, and is 1 meter long (about 3 feet). This is a HDMI 1.3 cable.We're now stocking a very fancy Official Raspberry Pi cable with overmolding and a Pi logo. Please note that these molded...

SKU: DF-FIT0884

This DC 5.5×2.1mm power splitter cable lets you power two DC devices from a single power source. Each cable splits one female DC jack into two male DC plugs, making it easy to share a power adapter between devices. Built with tinned oxygen-free copper wire for stable transmission and minimal sig...

SKU: AF-4067

A 1-metre 3.5 mm (1/8") male-to-male stereo audio cable with a premium metal-wound cover in silver. The braided metal sheath provides durability and a sleek, industrial aesthetic — a step up from standard rubber or ABS cables. Key Features 3.5 mm TRS Connectors – Standard stereo male plugs on ...

SKU: ET-1734951

A 10-metre Cat 5e Ethernet cable with RJ45 plugs on both ends. Suitable for connecting a Raspberry Pi, computer, or other networked device to a router, switch, or hub. Specifications Category – Cat 5e Length – 10 m Connectors – RJ45 plug on both ends Conductor Size – 24 AWG Jacket Colour –...