All Products

SKU: SF-WRL-15836

The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board. With its fast MCU and excellent point to point data transmission in the 915MHz ISM band with LoRa Capabilities, the Pro RF is a great choice for...

SKU: SF-WRL-20029 · MPN: WRL-20029

This kit gives you a pair of enclosed serial radio modems for sending serial data from one point to another over LoRa. It is designed for applications that need simple, reliable data reporting beyond typical WiFi or Bluetooth® range.The radios use a 1 Watt 915MHz transceiver and an open-source pr...

SKU: SF-SPX-18572 · MPN: SPX-18572

This breakout is built around the EBYTE 915M30S module, giving you a 1W (30dBm) LoRa transceiver for long-range, low-data-rate wireless projects. LoRa is well suited to links over long distances, low-power sleep operation and data rates around ~500bps.The board is designed to connect to any platf...

SKU: SF-GPS-25662 · MPN: GPS-25662

Built for field surveying, this heavy-duty RTK unit combines a multi-band GNSS receiver, internal antenna, battery, Bluetooth, WiFi and a 915MHz LoRa radio in a rugged enclosed design. It is intended to make Base/Rover setup straightforward while handling rough use across varied environments.Gali...

SKU: AF-5198 · MPN: ADA5198

This kit brings a RAK Wireless LoRa concentrator and GPS HAT together with the accessories needed to build a Raspberry Pi powered LoRa gateway. It is made for IoT projects where Wi-Fi range is not enough, or where mobile coverage is limited or unavailable.The HAT supports multi-channel, multi-nod...

SKU: DF-KIT0198-US · MPN: KIT0198-US

This dual-module GNSS-RTK kit brings a base station and mobile rover together for high-precision positioning projects. It uses Real-Time Kinematics, where the stationary base station sends correction data to the moving rover to reduce common GNSS errors and deliver centimetre-level positioning.Th...

SKU: DF-DFR1120-915 · MPN: DFR1120-915

The LoRaWAN Control Terminal is a comprehensive Industrial IoT (IIoT) node that bridges field devices with remote cloud platforms. Operating on the US 915MHz band with up to 4km range, this DIN-rail mountable controller integrates data acquisition, logic processing, and device actuation into a si...

SKU: EC-CRT01259B002

Lora technology and Lora devices have been widely used in the field of the Internet of Things (IoT), and more and more people are joining and learning Lora development, making it an indispensable part of the IoT world. To help beginners learn and develop Lora technology better, we have designed ...

SKU: EC-CIL12901M-1 · MPN: CIL12901M-1

ThinkNode M1 — Off-Grid Meshtastic Communication Device The Elecrow ThinkNode M1 is a compact, fully integrated LoRa transceiver designed for off-grid mesh networking. Pre-loaded with Meshtastic firmware, it enables secure, decentralised communication without any internet or cellular infrast...

SKU: SF-WRL-17506

The SparkFun expLoRaBLE Thing Plus is a Feather-footprint development board with the NM180100 system in package (SiP), from Northern Mechatronics. Thanks to the NM180100, as well as the Ambiq Apollo3 microcontroller and the Semtech SX1262 LoRa transceiver, this Thing Plus is a highly integrate...

SKU: DF-DFR1115-915 · MPN: DFR1115-915

This compact wireless node module is designed for long-distance, low-power outdoor IoT projects. Built around the Semtech SX1262 and LoRa modulation, it operates on the 915 MHz US915 band and supports both direct LoRa communication and LoRaWAN networking.It can be used for point-to-point links or...

SKU: EC-ACS95915S

The Elecrow Lora Shield is a long range transceiver on a Arduino shield form factor and based on Open source library.The Lora Shield allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference i...

SKU: WS-21667

SX1262 LoRa Node Module For Pico LoRaWAN Protocol Support Features At A Glance The Pico-LoRa-SX1262-XXXM is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262 with better performance than the SX127X series. The LoRa modulation technology solves the balancing prob...

SKU: EC-ILM13205D2-915

The Elecrow ThinkNode M5 is a high-performance LoRa communication device powered by the ESP32-S3 processor. Pre-installed with Meshtastic firmware and featuring the SX1262 wireless chip, it efficiently sends and receives LoRa signals for off-grid mesh networking. With its compact, integrated des...

SKU: DF-DFR1195 · MPN: DFR1195

This ESP32-S3 development board is built for long-range IoT prototyping using LoRa, LoRaWAN and Meshtastic. It can be used for one-to-one LoRa links, one-to-many LoRa communication, standard LoRaWAN networks, or Meshtastic mesh networking.The board is designed to be approachable for makers and de...

SKU: SF-WRL-14875

A compact 1/4-wave rubber duck antenna for LoRa and other 860–960MHz communication. With a centre frequency of 915MHz and 2dBi gain, this 110mm antenna is ideal for space-constrained LoRa nodes where a smaller antenna is preferred. Specifications Frequency Range – 860–960MHz (centre 915MHz) G...

SKU: AF-4074

Add long-range LoRa radio to your Raspberry Pi with the Adafruit LoRa Radio Bonnet. This plug-in board pairs an SX1276-based RFM95W LoRa transceiver with a 128×32 OLED display and three user buttons, giving you a complete radio node with a built-in interface for status messages and user interacti...

SKU: SF-WRL-14876

A 1/2-wave 915MHz LoRa duck antenna with 2dBi gain and an RP-SMA connector. Designed for the 860–960MHz band, this 200mm antenna is ideal for extending the range of LoRa nodes and other sub-GHz radio modules. Specifications Frequency Range – 860–960MHz Gain – 2dBi Type – 1/2-wave dipole Con...

SKU: DF-TEL0122

DFRobot FireBeetle series are low power consumption controllers designed for Internet of Things (IoT) development. The FireBeetle series are aiming straight at the point fast and convenient low-power IoT building. There are three categories of FireBeetle series, containing Boards (main...

SKU: TB-XC4392

The Arduino Compatible Long Range LoRa Shield turns your Arduino into a LoRa wireless node capable of transmitting and receiving data over several kilometres — without the need for a GSM network. Built around the Semtech SX1276 transceiver on the 915MHz band (Australian-legal), it's ideal for rem...