All Products
Showing 1-20 of 60 products
Pycom SiPy (Europe/Japan/Korea) - Sigfox+WiFi+Bluetooth MicroPython IoT Platform
Pycom Pytrack - GPS+motion shield for WiPy, SiPy, and LoPy
Pycom Pysense - Sensor shield for WiPy, SiPy, and LoPy
Pycom Expansion Board 2.0
Raspberry Pi CM5 Dual Gigabit Ethernet Base Board
MPN: 30915
ESP32-S3 Dual-Core Dev Board with 1.28" Round IPS Display
MPN: 26541
CS20 Dual-Resolution 3D TOF Solid-state LiDAR (5V, 5m)
Pycom LoRa Sigfox Antenna Kit
Pycom LoPy - LoRa+WiFi+Bluetooth MicroPython IoT Platform
Maixduino AI Development Board（OV2640）K210 RISC-V AI+lOT ESP32
2.13in 250x122 Quad-Colour ePaper Display with SRAM
MPN: ADA6366
Pycom Universal IP67 Case for Pycom boards
Pycom WiPy 2.0 - WiFi+Bluetooth MicroPython IoT Platform
Pycom Pycase - Clear
Pycom Pycase - Blue
Pycom Pycase - Green
Pycom Pycase - Grey
Relay Module with cycle delay timing switch self-locking and more
Mini TOF Laser Range Sensor – UART/I2C, Long Range
MPN: 28761
Cobra Flex Modular 4WD Drive-by-Wire Chassis – Hub Motors, Open-Source
MPN: 30987
Pycom SiPy (Europe/Japan/Korea) - Sigfox+WiFi+Bluetooth MicroPython IoT Platform
The SiPy from Pycom is a multi-network IoT development board combining Sigfox, WiFi, and Bluetooth (classic + BLE) on a single ESP32-powered module. Programmable with MicroPython and the Pymakr IDE, it enables rapid IoT application development with network failover for added resilience. This is ...
Pycom Pytrack - GPS+motion shield for WiPy, SiPy, and LoPy
The Pycom Pytrack is a GPS and motion sensor shield compatible with Pycom multi-network modules including the WiPy, SiPy, and LoPy. It provides accurate GNSS positioning, a 3-axis accelerometer, USB serial access, LiPo battery charging, and microSD storage — everything needed to get a location-tr...
Pycom Pysense - Sensor shield for WiPy, SiPy, and LoPy
The Pycom Pysense is a sensor-packed expansion shield that fits all Pycom multi-network modules — including the WiPy, SiPy, and LoPy. It gives you a head start on IoT projects by combining five sensors, a LiPo charger, micro-SD card slot, and USB serial access in one compact board. With ultra-lo...
Pycom Expansion Board 2.0
The Pycom Expansion Board 2.0 is a base board for Pycom development modules, providing USB connectivity, LiPo battery charging, a microSD card slot, and easy access to all module pins. It is compatible with the WiPy 2.0, LoPy, SiPy, FiPy, and GPy. Power the board via USB or a LiPo battery connec...
Raspberry Pi CM5 Dual Gigabit Ethernet Base Board
·
Enhance your Raspberry Pi Compute Module 5's capabilities with our cutting-edge Mini Dual Gigabit Ethernet Base Board/Mini-Computer Kit – the perfect companion for all variants of CM5, enabling a wide array of networking and industrial applications.Please Note: Raspberry Pi Compute Module 5 is NO...
ESP32-S3 Dual-Core Dev Board with 1.28" Round IPS Display
·
Unlock the full potential of IoT development with the cutting-edge ESP32-S3 Development Board, your all-in-one solution for creating interactive and smart connected devices. This powerhouse board is designed by Waveshare to deliver exceptional performance with its Xtensa® 32-bit LX7 dual-core pro...
CS20 Dual-Resolution 3D TOF Solid-state LiDAR (5V, 5m)
This CS20 Dual-Resolution 3D TOF Solid-state LiDAR is equipped with a ToF image sensor with a resolution of 640*480 and uses ToF technology to capture three-dimensional information of objects and space. It can accurately measure distances up to 5m while consuming an average of only 1.2W of pow...
Pycom LoRa Sigfox Antenna Kit
This universal LoRa & Sigfox Antenna Kit can be used with either the LoPy or the SiPy triple network IoT development boards. The LoRa & Sigfox Antenna Kit includes External antenna. RF cable assemblies RP-SMA (female) JK-IPEX MHF U.FL 1.13 100MM RP-SMA (male) tilt swivel 1/2 wave whip an...
Pycom LoPy - LoRa+WiFi+Bluetooth MicroPython IoT Platform
The Pycom LoPy is a compact, triple-network MicroPython development board combining LoRa, WiFi, and Bluetooth on the Espressif ESP32 chipset. It can function as both a LoRa node (up to 40 km range) and a Nano LoRa Gateway (up to 22 km, 100 nodes), making it a versatile platform for LPWAN IoT depl...
Maixduino AI Development Board（OV2640）K210 RISC-V AI+lOT ESP32
Based on Kendryte K210 RISC-V AI processor, Maixduiono AI development board comes with MI AI module and ESP32 module for WiFi and Bluetooth connectivity in Arduino UNO form factor. K210 comes with dual-core processor chip with independent FPU, 64 bits CPU bit width, 8 MB on-chip SRAM, 400 adju...
2.13in 250x122 Quad-Colour ePaper Display with SRAM
·
This compact ePaper module is designed for adding a small, paper-like display to your electronics project. It features a 2.13-inch quad-colour panel with a 250 x 122 pixel resolution and on-board SRAM.2.13-inch eInk/ePaper display250 x 122 pixel resolutionQuad-colour panelIncludes SRAMIt’s a prac...
Pycom Universal IP67 Case for Pycom boards
If you have a Pycom board, you probably want to stick it outside. How to do that safely? Behold the Universal IP67 Case! Pycom designed their own waterproof enclosure with thoughtful push-in tabs to perfectly fit accessory components, creating a water-tight seal. Need to affix your project ...
Pycom WiPy 2.0 - WiFi+Bluetooth MicroPython IoT Platform
The Pycom WiPy 2.0 is a compact, MicroPython-enabled IoT development platform built on the Espressif ESP32 chipset. With dual processors, 1 km WiFi range, and Bluetooth Low Energy, it delivers enterprise-grade wireless connectivity in a breadboard-friendly form factor. Pycom's intuitive Python A...
Pycom Pycase - Clear
The Pycase is a compact, transparent enclosure designed specifically for Pycom development boards paired with an expansion board. It accommodates the development board, expansion board, antenna, and has room for a small battery. Compatibility Pycom WiPy Pycom LoPy Pycom SiPy Pycom FiPy Pycom GP...
Pycom Pycase - Blue
Pycase is a small, transparent case developed specifically for a Pycom development board and expansion board combo. Holds the development board, expansion board, antenna, and there’s even room for a small battery. Pycase is compatible with WiPy, LoPy, SiPy, FiPy, or GPy. Note: the expansion bo...
Pycom Pycase - Green
Pycase is a small, transparent case developed specifically for a Pycom development board and expansion board combo. Holds the development board, expansion board, antenna, and there’s even room for a small battery. Pycase is compatible with WiPy, LoPy, SiPy, FiPy, or GPy. Note: the expansion bo...
Pycom Pycase - Grey
Pycase is a small, transparent case developed specifically for a Pycom development board and expansion board combo. Holds the development board, expansion board, antenna, and there’s even room for a small battery. Pycase is compatible with WiPy, LoPy, SiPy, FiPy, or GPy. Note: the expansion bo...
Relay Module with cycle delay timing switch self-locking and more
This versatile relay module is a powerhouse of timing functions, ideal for projects requiring precise control over relay activation and deactivation. Featuring adjustable parameters and 18 distinct modes, it provides exceptional flexibility for automation tasks. Key Features Customisable Parame...
Mini TOF Laser Range Sensor – UART/I2C, Long Range
·
TOF Mini Laser Range Sensor – Long Range Precision Measuring with UART / I2C CommunicationElevate your robotics or automation projects to new heights with our versatile and precise TOF (Time of Flight) Mini Laser Range Sensor. Custom-built for long-distance measuring with a remarkably tiny blind ...
Cobra Flex Modular 4WD Drive-by-Wire Chassis – Hub Motors, Open-Source
·
Cobra Flex Universal Modular Drive-by-Wire ChassisProduct Overview:Step into the future of robotics with the Cobra Flex Universal Modular Drive-by-Wire Chassis. Designed for adaptability and innovation, this 4WD compact differential chassis stands at the frontier of robotic development. Complete ...
