All Products

SKU: WS-20187

The RP2040-Zero is a compact Pico-like development board based on the Raspberry Pi RP2040 microcontroller. With a USB-C connector, castellated pads for direct soldering to carrier boards, and 29 multi-function GPIO pins, it packs full RP2040 capability into a miniature form factor. Programming i...

SKU: EF-EF01033

The Pico:ed is a development board built around the Raspberry Pi RP2040 microcontroller, featuring a 7×17 LED dot-matrix display and two programmable buttons on the front — making it perfect for interactive classroom projects. It uses the same edge connector as the BBC micro:bit, so it's compatib...

SKU: WS-29361 · MPN: 29361

The Waveshare RP2350-Zero is a compact development board built around the Raspberry Pi RP2350A microcontroller. It features a dual-core Arm Cortex-M33 processor alongside a dual-core Hazard3 RISC-V processor, clocked at up to 150 MHz, with 520 KB of SRAM and 4 MB of onboard flash memory. Designe...

SKU: DF-DFR1075 · MPN: DFR1075

The FireBeetle 2 ESP32-C6 is a low-power IoT development board built around a 160MHz RISC-V single-core processor. It supports Wi-Fi 6 (802.11ax), Bluetooth 5, Zigbee 3.0, Thread 1.3, and the Matter smart home standard, making it one of the most connectivity-versatile ESP32 boards available. Wit...

SKU: SF-DEV-16526

The Alchitry Cu is an affordable FPGA development board featuring the Lattice iCE40 HX with 7,680 logic cells. This SparkFun version adds a Qwiic connector for easy I2C sensor and actuator integration. It can be programmed using entirely open-source tools via Project IceStorm. The Cu provides 79...

SKU: WS-30941 · MPN: 30941

Unleash the full potential of IoT with the ESP32-C6 1.9inch Display Development Board, an innovative tool built to transform your smart applications. Perfect for both beginners and seasoned developers, this compact yet powerful board combines high-resolution visuals with the latest connectivity f...

SKU: DF-DFR1139 · MPN: DFR1139

##Introduction The FireBeetle 2 ESP32-E (N16R2) IoT development board equipped with 16M Flash and 2M PSRAM. It is designed to provide superior performance for applications such as the LVGL graphics library for interface design and interaction. Built on the foundation of Espressif's ESP32-WROOM-32...

SKU: DF-DFR1117

Introducing the Beetle ESP32 C6 Mini Development Board - the perfect solution for your wireless smart wearable device needs. This compact Arduino board is based on the powerful ESP32-C6 chip and boasts a sleek design with dimensions as small as a coin (25*20.5mm). With its high-performance 160MHz...

SKU: WS-30951 · MPN: 30951

A development board based on the ESP32-C6-WROOM-1-NX module, featuring a 32-bit RISC-V single-core processor running at up to 160 MHz. Supports Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) — making it a versatile platform for IoT, smart home, and industrial automation projects....

SKU: DF-DFR0813

The ESP32-S2-DevKitM-1 is an entry-level development board built around the ESP32-S2-MINI-1 module. It features a single-core Xtensa LX7 processor with Wi-Fi connectivity, 4MB SPI flash, and most I/O pins broken out to breadboard-friendly headers on both sides. Powered via Micro-USB with an on-b...

SKU: DF-DFR1055 · MPN: DFR1055

The ESP32-C6-DevKitM-1 is an entry-level development board built around the ESP32-C6-MINI-1 module, featuring a RISC-V 32-bit single-core processor running at up to 160 MHz. It integrates Wi-Fi 6 (2.4 GHz), Bluetooth 5 (LE), Zigbee 3.0, and Thread 1.3 — making it one of the most connectivity-rich...

SKU: SF-DEV-14972

The Neutis Development Kit from Emlid is a quad-core system-on-module (SoM) development platform based on the Neutis N5 module. It runs a Yocto-based Linux BSP with an up-to-date kernel, powered by a 64-bit ARM Cortex-A53 CPU and ARM Mali450 MP2 GPU. The development board provides easy access to...

SKU: SF-DEV-17514

The Alchitry Au+ is the upgraded version of the Alchitry Au, featuring the more powerful Xilinx Artix 7 XC7A100T FPGA with over 100,000 logic cells — nearly 3× the capacity of the standard Au. It also includes 256MB of DDR3 RAM, a Qwiic connector for I2C integration, and all the same expandabilit...

SKU: WS-30934 · MPN: 30934

Unleash Your Creativity with the ESP32-S3 3.5inch Touch Display Development BoardTransform your innovative projects with the ESP32-S3 3.5inch Capacitive Touch Display Development Board – a versatile and powerful addition to your electronics toolkit. Ideal for hobbyists and professionals alike, th...

SKU: DF-DFR1033 · MPN: DFR1033

##Introduction Portenta H7 Lite Connected is a high-performance MCU development board with integrated Wi-Fi and Bluetooth connectivity, and is a product in the Arduino Portenta H7 series. It uses the same STM32H7 MCU chip and Cortex-M7/Cortex-M4 core as Arduino Portenta H7, enabling complex multi...

SKU: WS-25081

A compact ESP32-S3 development board based on the ESP32-S3FH4R2 dual-core processor running at up to 240MHz. Features 4MB flash, 2MB PSRAM, 2.4GHz Wi-Fi (802.11 b/g/n), and Bluetooth 5 (LE). The castellated module design with on-board ceramic antenna allows direct soldering to carrier boards, mak...

SKU: SS-113991115

Seeed Studio XIAO Series are diminutive development boards, sharing a similar hardware structure, where the size is literally thumb-sized. The code name "XIAO" here represents its half feature "Tiny", and the other half will be "Puissant".Seeed Studio XIAO ESP32S3 Sense integrates a camera sensor...

SKU: WS-21179

A compact WiFi development board based on the ESP32-S2 single-core Xtensa LX7 processor, running at up to 240MHz with 2.4GHz WiFi connectivity. Available in multiple variants — with or without an onboard 0.96" IPS LCD display and pre-soldered pin headers — this board is compatible with the Raspbe...

SKU: SF-DEV-16885

The SparkFun MicroMod ATP (All The Pins) Carrier Board breaks out every pin from the MicroMod M.2 connector to 0.1" female headers and PTH pads, giving you full access to your MicroMod Processor Board's capabilities. It's the ideal development and prototyping platform for evaluating different Mic...

SKU: PI-PHOTONH

The Particle Photon is a tiny Wi-Fi development board for prototyping Internet of Things products. Built around a Broadcom BCM43362 Wi-Fi chip (the same used in Nest Protect and LIFX) and a powerful STM32F205 120 MHz ARM Cortex M3 microcontroller, it connects your project to the Particle Cloud fo...