All Products

SKU: AF-857

Add a typing interface to your project with this microcontroller-friendly miniature keyboard. We found the smallest PS/2+USB keyboard available, a mere 8.75" x 4.65" x 0.6" (220mm x 118mm x 16mm)! It's small but usable to make a great accompaniment to either a microcontroller project or a comp...

SKU: M5-U026

The M5Stack 16-Key Capacitive Touch Unit is a Makey Makey-inspired input device built around an ATmega328P microcontroller. It detects capacitive touch across 16 key pads, allowing you to turn everyday objects — fruit, foil, water, or anything conductive — into touch-sensitive buttons. A built-in...

SKU: AF-4830

The Adafruit MPR121 Gator Breakout adds 12 capacitive touch inputs to any microcontroller project — no soldering required. With large alligator/croc-clip friendly pads and STEMMA QT / Qwiic connectors, simply clip conductive materials to the pads and plug into your board's I2C port. The MPR121 h...

SKU: EF-EF04011

The Octopus Touch PAD Sensor is a capacitive touch module based on the TTP223-BA6 IC. It detects touch through dielectric materials such as glass, ceramic, and plastic, making it suitable for touch-through-panel applications. The module connects via a 3-pin Octopus connector for plug-and-play use...

SKU: AF-4319

The Adafruit PyRuler is a PCB reference ruler and a fully functional CircuitPython microcontroller in one. Measuring approximately 25 × 150 mm (1" × 6"), this gold-plated FR4 ruler features common SMD component package outlines, a font size guide, trace-width diagram, and AWG wire gauge drill hol...

SKU: AF-4870

The Adafruit Neo Trinkey is a tiny USB-A development board featuring an ATSAMD21 microcontroller and four RGB NeoPixel LEDs. Just plug it into any USB-A port on a computer or laptop and you've got a programmable, colourful key that can act as a status indicator, macro keypad, MIDI controller, or ...

SKU: PR-PIM175

The Explorer HAT Pro is a feature-packed add-on board for Raspberry Pi that brings together digital I/O, analog inputs, capacitive touch, motor drivers, LEDs, and a mini breadboard — all on a single HAT. It's ideal for robotics, games, science experiments, and learning electronics with the Pi. K...

SKU: AF-1602

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has a very nice feature that makes it stand out for us: it will light up the 8 onboa...

SKU: DF-DFR1092 · MPN: DFR1092

This 3.5-inch display module combines a 480 × 320 IPS panel with capacitive touch for ESP32 and Arduino projects. Its optical bonding process laminates the touch panel and display together, improving clarity while helping reduce reflections and dust ingress.For wiring, the module offers both a st...

SKU: AF-1362

This breakout board is the simplest way to create a project with mutiple capacitive touch sensors. No microcontroller is required here - just power with 1.8 to 5.5VDC and connect up to 5 conductive pads to the 5 left-hand pins. When a capacitive load is detected (e.g. a person touches one of the ...

SKU: AF-1374

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.When a capacitive load is detected (e.g. a person touches the sensor-pad area...

SKU: WS-30711 · MPN: 30711

Unlock Your Development Potential with the RP2350 2inch Capacitive Touch DisplayEngineer the future with the RP2350 2inch Capacitive Touch Display Development Board, designed by Waveshare to be your go-to for innovation and interactive projects. This high-performance MCU board integrates a multit...

SKU: PR-PIM272

Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?) Touch pHAT has six capacitive touch buttons, each with a bright white LED, designed to be completely agnostic about what they're used for. You can even use a dry erase pen to wri...

SKU: WS-29318 · MPN: 29318

A 3.5" IPS display module with 320×480 resolution, 262K colours, and a 2-point capacitive touchscreen. The ST7796S display driver communicates over SPI while the FT6336U touch controller uses I2C, keeping wiring simple. An onboard voltage translator supports both 3.3 V and 5 V logic levels. Comp...

SKU: AF-2213

This 8.000 MHz crystal comes in a standard HC49/US short-style package and is breadboard-friendly for use with any microcontroller or device that requires an external crystal. Two 20 pF load capacitors are included. With 30 PPM tolerance and 50 PPM stability, this crystal is precise enough for h...

SKU: PR-PIM280

Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?) Touch pHAT has six capacitive touch buttons, each with a bright white LED, designed to be completely agnostic about what they're used for. You can even use a dry erase pen to wri...

SKU: AF-2090

The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a capacitive single-touch touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delivers vivid colour output for interactive projects. The breakout supports two inte...

SKU: AF-5021

The Adafruit Slider Trinkey is a tiny USB A board built around the ATSAMD21 microcontroller with a pre-soldered 35 mm slide potentiometer and two NeoPixel LEDs. Plug it into any USB A port on your computer and program it as a volume control, brightness adjuster, colour picker, or any custom slide...

SKU: AF-1947

The 2.8" TFT Touch Shield with Capacitive Touch plugs directly into an Arduino and provides a bright, full-colour display with a smooth glass capacitive touchscreen and onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI for the d...

SKU: DF-DFR0030

A digital capacitive touch sensor from DFRobot's Gravity series. It detects touch through the same capacitive sensing technology used in smartphones — even through thin cloth or paper. The sensor outputs a digital high/low signal, making it a simple drop-in replacement for mechanical buttons in A...