All Products

SKU: LB-BK-356

A 10-pack of 10 kΩ trim potentiometers, perfect for breadboarding and prototyping. They feature a long, grippy adjustment knob and 0.1″ pin spacing that plugs directly into breadboards or perfboards with ease. Specifications Resistance – 10 kΩ Pin Spacing – 0.1″ (2.54 mm), breadboard compatib...

SKU: AF-4133

A compact 10K ohm linear potentiometer with a built-in knurled plastic knob — no separate knob needed. The 0.1" pin spacing plugs directly into a standard breadboard, making it perfect for prototyping and quick adjustments. Larger than a trim-pot but smaller than a full-size panel-mount potentio...

SKU: PI-COM1001

The resistance of these trim potentiometers ranges linearly from 0Ω to 10KΩ over a full cycle (240°).They are horizontally mounted and ideal for breadboarding or perfboard use due to the 0.1" spacing off the pins. Rated for up to 1/6th of a watt and good for 10,000 cycles. Maximum power: 1/6th W ...

SKU: AF-3391

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a log taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-points, so you can p...

SKU: SF-SPX-21226 · MPN: SPX-21226

This handy kit gives you a simple way to compare and tune the brightness of your own LEDs, helping you avoid a project full of mismatched indicator lights. It was originally designed for side-by-side LED testing and is especially useful when choosing resistor values or learning how brightness cha...

SKU: AF-562

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-poin...

SKU: SF-COM-09806

There are lots of trimpots out there. Some are very large, some so small they require a screwdriver. Here at Little Bird, we just needed a simple one that worked. This 10K trimmable potentiometer has a small knob built right in and it’s breadboard friendly to boot! Perfect for your next LCD ...

SKU: AF-3395

This Panel Mount Right Angle 10K Linear Potentiometer w/ On-Off Switch is a two-in-one, with both a breadboard-friendly potentiometer and a switch. For the potentiometer-half, you've got a standard linear taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not s...

SKU: AF-356

These are our favorite trim pots, perfect for breadboarding and prototyping. They have a long grippy adjustment knob and with 0.1" spacing, they plug into breadboards or perfboards with ease. This is the same pot that comes with our character LCDs and tutorial packs.

SKU: PR-ADVPIKIT

All the electronic components you need to complete the hands-on projects in the Adventures in Raspberry Pi book. This carefully curated kit includes high-quality, Raspberry Pi-compatible parts — from a 3.3V-safe LCD display to breadboard-friendly trim pots and jumper wires — all packed in a handy...

SKU: LB-LS2921

Comes as a standard 10K ohm linear potentiometer with 0.1" spacing it works great for  prototyping. It has a nice feel, tweaking it is quite satisfying.These are used on the crack the code shield.1 x Potentiometer with Built In Knob - 10K ohm

SKU: AF-4272

Slip slidin' away Slip slidin' away You know the nearer your resistance The more you're slip slidin' awayIf you're tired of the regular-old-twisty potentiometers we carry, why not slide over and try this slide pot? Most famously used on mixers and the transporter control panel on S...

SKU: SF-COM-11620

A compact linear-taper slide potentiometer rated at 10 kΩ and 0.1 W. This small slider features solder tab connections, a 20 mm travel distance, and two mounting holes for easy installation. Key Features Linear Taper – Smooth, proportional resistance change across the travel range Solder Tab ...

SKU: AF-3606

The Mongoose OS Google IoT Core Pack is a complete starter kit for building IoT projects with Google Cloud, built around the Adafruit Feather HUZZAH32 (ESP32). Developed in collaboration with Google and Mongoose OS, this kit includes a pre-soldered ESP32 Feather board along with sensors, actuator...

SKU: AF-3393

A dual-ganged 10K linear potentiometer with a built-in on/off switch — two components in one convenient panel-mount package. The dual 10 kΩ linear-taper pots share a grippy shaft that turns smoothly without shifting on its own, and the on/off switch activates at the beginning of the shaft's rotat...

SKU: AF-2975

The ultimate companion kit for anyone learning electronics. The Adafruit Parts Pal packs LEDs, resistors, capacitors, transistors, sensors, switches, and prototyping essentials into a handy storage box — everything you need to dive into breadboard projects right away. Pair it with an Arduino, Ra...

SKU: AF-5696

We are very excited to carry a new bundle supporting Adafruit friend and maker Jen Fox and her new book, Beginning Breadboarding: Physical Computing and the Basic Building Blocks of Computers!  Using fun, hands-on projects, learn what a circuit is and how it works! This book uses a common...

SKU: AF-5466

A 10KΩ linear slide potentiometer with a built-in geared DC motor underneath the slider. The motor can move the wiper up and down programmatically, while the slider also moves freely by hand when the motor is unpowered. This combination allows both manual and digital control — commonly seen in pr...

SKU: AF-3481

A panel-mount 10 kΩ logarithmic potentiometer with an integrated on/off switch. The logarithmic taper is designed for audio volume control — resistance increases on a curve that matches how the human ear perceives loudness, giving smooth and natural volume adjustment from quiet to full. The buil...

SKU: SF-SEN-08679

A thin, flexible membrane potentiometer that senses finger or stylus position along a 200 mm strip. Pressing anywhere on the strip varies resistance linearly from 100 Ω to 10 kΩ, providing accurate positional data for user interfaces, sliders, and control inputs. The connector uses 2.54 mm (0.1"...