All Products

SKU: AF-3006

The Adafruit MAX98357A I2S Class D Amplifier Breakout is an all-in-one digital audio solution that decodes I2S audio and amplifies it directly to a speaker — no separate DAC required. Delivering up to 3.2W into a 4Ω speaker, it's a compact and efficient way to add amplified sound to your Raspberr...

SKU: AF-5770

The Adafruit I2S Amplifier BFF is a compact add-on that brings high-quality 3W audio to any QT Py or Xiao development board. Featuring a MAX98357 Class D amplifier, it delivers crisp I2S digital audio using just three GPIO pins (A0, A1, A2) that don't conflict with I2C, UART, or SPI. Designed as...

SKU: LB-LS6842

This compact audio solution pairs the MAX98357 I2S digital amplifier with a high-quality 3W 8Ω 3070 full-range speaker, delivering clear and powerful sound from any I2S-enabled microcontroller. The MAX98357 accepts digital audio directly over I2S and handles conversion and amplification internall...

SKU: AF-5769

The Adafruit Audio BFF is a compact add-on board that turns your QT Py or Xiao into a powerful audio playback device. It features a microSD card slot (up to 64 GB) and a MAX98357 I2S 3W amplifier, all designed to fit neatly on the back of your miniature dev board. The board connects over the SPI...

SKU: DF-DFR0954

This I2S digital amplifier based on the MAX98357 I2S Class D amplifier module works great with microcontrollers with I2S audio outputs like ESP32 and can be applied to projects like IoT nodes, smart home devices, Bluetooth audio players, and so on. The module supports a 3.3V-5V power supply. And ...

SKU: SF-DEV-14809

The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analog converter (DAC), which converts I2S (not be confused with I2C) audio to an analog signal to drive speakers. The I2S Audio Breakout converts the digital audio signals using the I2S standard to an analog signal and amplifies...

SKU: AF-987

This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, its incredibly efficient (over 90% efficient when driving...

SKU: AF-3957

The Adafruit CRICKIT HAT is a robotics and electronics driver board that plugs directly onto any Raspberry Pi with a 2×20 GPIO header. It adds motor drivers, servo outputs, capacitive touch inputs, a level-shifted NeoPixel driver, and a 3W I2S audio amplifier — all managed over I2C via the Adafru...

SKU: AF-1552

This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 2.1W channels into 4 ohm impedance speakers (@ 10% THD). Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, it's incredibly efficient (89% efficient when...

SKU: AF-1788

The Adafruit Music Maker MP3 Shield with 3W Stereo Amp turns any Arduino into a powerful audio player, recorder, and MIDI synthesiser — with built-in amplification for driving speakers directly. Powered by the VS1053B codec chip, it decodes MP3, AAC, Ogg Vorbis, WMA, FLAC, WAV, and MIDI formats, ...

SKU: AF-5768

The Adafruit RP2040 Prop-Maker Feather is an all-in-one board designed for building props, cosplay pieces, lightsabers, animatronics, and interactive toys. It combines the RP2040 microcontroller with a prop-making toolkit — I2S audio amplifier, NeoPixel driver with level shifting, accelerometer, ...

SKU: AF-3346

The Adafruit I2S 3W Stereo Speaker Bonnet adds high-quality digital audio output to any Raspberry Pi with a 2×20 GPIO header. Using the I2S digital sound standard, audio data goes directly to the onboard Class D amplifier — delivering crisp, static-free stereo sound without relying on the Pi's he...

SKU: LB-LS6972x2

A compact stereo speaker pair for small audio projects, handheld devices, and embedded builds. Each 45mm driver is rated at 4Ω and 3W, delivering clear, balanced sound in a slim form factor. Pre-wired with a PH2.0 plug for quick connection to common audio amplifier boards. Key Features Stereo ...

SKU: DF-DFR0119-O

This compact stereo amplifier module from DFRobot features a 2.54mm pin pitch for easy breadboard and embedded use. It delivers 3W per channel with left and right stereo output, and includes a shutdown (SHDN) pin for switching between working and sleep modes. By default, the module is in working...

SKU: PR-PIM267

The pHAT BEAT is a stereo audio add-on for the Raspberry Pi featuring dual I2S DAC/amplifiers, 16 RGB LEDs, and six tactile buttons. It delivers high-quality, amplified digital audio through two channels at up to 3W per speaker. The dual rows of eight APA102 RGB LEDs work beautifully as a VU met...

SKU: PR-PIM351

Turn your Raspberry Pi into a retro games console! Picade X HAT includes joystick and button inputs, a 3W I2S DAC/amplifier, and soft power switch. Nice! Picade X HAT, our latest version, has all the same great features as the original Picade HAT but now has no-fuss female Dupont connectors to...

SKU: AF-3436

The Adafruit Music Maker FeatherWing with Amplifier brings powerful audio playback to any Feather board. Built around the VS1053B codec chip, it decodes a wide variety of formats including MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, and WAV — and includes an on-board 3W class-D stereo amplifier so you...

SKU: AF-3343

The Adafruit CRICKIT FeatherWing is a robotics and electronics driver board that plugs into any Feather mainboard. It adds motor drivers, servo outputs, capacitive touch inputs, NeoPixel control, and an audio amplifier — all managed over I2C via the Adafruit seesaw co-processor, so it only uses t...

SKU: PR-PIM261

A complete internet radio project kit based on the Raspberry Pi Zero W. Includes a Pi Zero W, the pHAT BEAT DAC and stereo amplifier, a 5W speaker, and a retro-styled blue acrylic enclosure. Assembly takes approximately 30 minutes and requires soldering. The pHAT BEAT features dual MAX98357A I2S...

SKU: PR-PIM110

This is an Arduino-compatible board with integrated 3W stereo amplifier designed for use in arcade projects (like our Picade).It behaves like a keyboard when plugged in via USB and has a default key-mapping (though you can reprogram it using the Arduino IDE). Connections are made using ...