All Products

SKU: AF-3900

The Adafruit HalloWing M0 Express is a skull-shaped development board built around the ATSAMD21G18 processor. Featuring a 1.44" full-colour TFT display, a 3-axis accelerometer, a light sensor, a speaker driver, and Feather-compatible headers, it's designed for wearables, badges, cosplay props, an...

SKU: AF-4013

A laser-cut clear acrylic lens holder with mounting hardware, designed specifically for the Adafruit HalloWing. It holds a lip-edge convex lens (glass or plastic) in front of the HalloWing's display, creating an eye-catching magnified effect for animated eye projects and wearable displays. Assem...

SKU: AF-3727

The Adafruit ItsyBitsy M0 Express is a compact yet powerful microcontroller board built on the ATSAMD21 Cortex M0+ running at 48 MHz. At just 1.4" × 0.7", it delivers the same capability as the Metro M0 or Feather M0 Express in a fraction of the size — perfect for shrinking prototypes into final ...

SKU: AF-2478

Add a full-colour touchscreen to your project with this 2.4" TFT LCD breakout. The 240×320 pixel display delivers vivid RGB colour with individual pixel control, driven by the ILI9341 controller with built-in RAM buffering so your microcontroller does minimal work. A resistive touchscreen overlay...

SKU: AF-3505

The Adafruit Metro M0 Express brings 32-bit ARM power to the familiar Metro/UNO shield-compatible form factor. Powered by the ATSAMD21G18 ARM Cortex M0+ processor at 48 MHz, it offers 256 KB flash and 32 KB RAM — a massive upgrade over the ATmega328-based Metro. Designed from the ground up for Ci...

SKU: AF-4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: AF-3403

The Feather M0 Express is Adafruit's CircuitPython-optimised Feather, built around the ATSAMD21G18 ARM Cortex M0+ processor. It combines the standard Feather M0 platform with 2 MB of SPI flash storage, a Mini NeoPixel, and a UF2 bootloader for drag-and-drop programming — no special tools or drive...

SKU: AF-3923

Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like this speaker as it is small and comes with nice skinny wires with a connector on the end. It has a handy "Molex PicoBlade" 1.25mm pitch 2-pin ...

SKU: AF-3178

The Feather M0 RFM95 LoRa Radio (900 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The exact frequency is software-configurable, allowing you to tune dynamically for your region's ISM ban...

SKU: AF-3176

The Feather M0 RFM69HCW Packet Radio (868/915 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 868 or 915 MHz. The exact radio frequency is software-configurable, allowing you to tune dynamically for your reg...

SKU: AF-4195

Add a crisp, paper-like display to your Feather project with the Adafruit 2.13" Monochrome eInk FeatherWing. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. The FeatherW...

SKU: AF-3061

The Feather M0 WiFi with uFL pairs the ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 Wi-Fi module, featuring a uFL connector instead of an on-board antenna. This allows you to connect an external 2.4 GHz antenna for improved range or custom antenna placement in enclosures. The ATWINC15...

SKU: AF-4227

Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like this speaker as it is small and comes with nice skinny wires with a connector on the end. It has a handy "Molex PicoBlade" 1.25mm pitch 2-pin ...

SKU: AF-6022 · MPN: ADA6022

DescriptionPerfect for building your custom keyboard, these "Half Height" Low Profile MX key switches are compatible with standard MX layouts and solder-free sockets, offering a significantly slimmer design. While standard Cherry MX switches have a height of 10mm above the board, these switches ...

SKU: AF-3177

The Feather M0 RFM69HCW Packet Radio (433 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 433 MHz. It includes built-in USB, LiPo battery charging, and the full Feather M0 pin set in a compact, portable form...

SKU: AF-3249

Drive massive NeoPixel installations without blocking your code. The NeoPXL8 FeatherWing enables 8 concurrent DMA NeoPixel strands from a single Feather M0, with up to 250 pixels per strand (2,000 total) — all running in the background via hardware DMA so your code keeps executing. The wing hand...

SKU: AF-3010

The Feather M0 WiFi pairs the ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 Wi-Fi module for reliable 802.11b/g/n connectivity. The ATWINC1500 handles all Wi-Fi networking on a dedicated chip, freeing the main processor for your application code without the need to yield or share CPU ti...

SKU: AF-4694

The Adafruit SHARP Memory Display Breakout features a 2.7" 400×240 monochrome LCD that combines the ultra-low power consumption of e-paper with the fast refresh rates of a traditional LCD. The larger display area and higher resolution make it ideal for detailed information displays, showing crisp...

SKU: AF-4145

The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will unlock the prop-maker inside all of us, with tons of stuff packed in to make sabers & swords, props, toys, cosplay ...

SKU: AF-1269

The Adafruit 1.2" 4-Digit 7-Segment Display with I2C Backpack in yellow makes it easy to add a large, bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so you only need two data pins to control a full 4-digit display. The HT16K3...