All Products
Showing 1-20 of 60 products
6-AA Battery Holder
A compact enclosed battery holder for six AA batteries, providing approximately 9V (alkaline) or 7.2V (NiMH rechargeable) from a series configuration. Features bare wire leads for flexible integration into your project. Key Features 6-Cell Capacity – Holds six AA batteries in series Enclosed ...
6xAA Battery Holder(double layer)
A double-layer 6×AA battery holder with a stacked 3+3 cell arrangement for a more compact footprint. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Comes with 150mm (6") red and black wire leads. Specifications Cell Quantity: 6× AA (double layer...
6xAA battery holder
A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black wires for easy connection. Specifications Cell Quantity: 6× AA Output Voltage...
6xAA Battery Holder with DC2.1 Power Jack
A 6×AA battery holder with a DC 2.1mm power jack that plugs directly into an Arduino's barrel jack input. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Features mounting holes for secure installation. Specifications Cell Quantity: 6× AA Output...
6 x AA battery holder with 5.5mm/2.1mm plug
A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells for 7.2V at ~2000mAh. The 9V alkaline output is ideal for boards with a 5V volta...
6xAA Battery Holder with DC connector
A simple 6-cell AA battery holder with a 125mm (5") cable terminated with a standard 5.5×2.1mm centre-positive barrel jack connector. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells, ready to plug directly into devices with a standard DC barrel jack ...
9V Battery Holder
A snap-in 9V battery holder with a 5.5mm/2.1mm centre-positive barrel jack connector. The battery clicks securely into place, and three mounting holes allow you to attach the holder to an enclosure or chassis. Key Features Snap-In Design – Battery clicks securely into place 5.5mm/2.1mm Barrel...
9V battery holder with switch 5.5mm/2.1mm plug
A 9V battery holder with a built-in on/off switch and a pre-attached 5.5mm/2.1mm centre-positive barrel plug. Ready to use out of the box — snap in a 9V battery, plug into your Arduino or other development board, and use the switch to control power. Key Features On/Off Switch – Conveniently co...
9V Battery Holder with Dc connector
A simple 9V battery holder with a DC barrel connector. Provides a convenient way to mount and connect a 9V battery to your electronics projects. Key Features DC Barrel Connector – Standard connector for easy integration Snap-In Battery Mount – Holds a 9V battery securely Also Available 9V...
9V Battery Snap
A compact 9V battery clip for providing portable power to your circuits. The clip is robust and insulated, offering a safe and solid connection for either a 9V battery or compatible battery packs. Key Features Insulated Housing – Safe, protected connection to your battery Versatile Use – Work...
9V battery holder without DC connector
A simple single-slot 9V battery holder case with wire leads for soldering or connecting directly to your projects. Keeps your battery secure and organised. Key Features Wire Leads – Pre-attached cables for direct soldering or breadboard connection Snap-Fit Design – Holds one standard 9V batte...
9V Battery snap - High Quality
A premium-quality 9V battery clip built for reliability. The holder is moulded in Delrin with corrosion-resistant nickel-plated springs and studs, making it ideal for projects and products that demand a durable, long-lasting connection. Key Features Delrin Housing – Tough, precision-moulded bo...
9V Battery snap - Standard
A standard-quality 9V battery clip with flylead connections. The holder is moulded in Delrin with corrosion-resistant nickel-plated springs and studs for reliable everyday use. Specifications Cell Type – 9V Output Connection – Flyleads Cable Length – 150 mm Also Available 9V Battery Snap ...
9V to Barrel Jack Adapter
A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack on the other end. Plug it onto a standard 9V battery and connect directly to any device with an onboard barrel jack — perfect for powering an Arduino Uno or other development board from battery. Key Features 9V Batt...
9V to Barrel Jack Adapter
A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack. Plug a 9V battery into one end and connect the other to any device with an onboard barrel jack — ideal for powering Arduinos, development boards, and evaluation boards from battery. Key Features 9V Battery Snap – S...
9V battery clip with 5.5mm/2.1mm plug
A high-quality 9V battery clip with a pre-assembled 5.5mm/2.1mm centre-positive barrel connector. The moulded plastic clip covers the battery terminals to prevent short circuits, and the barrel plug connects directly to Arduino boards and other devices with a standard DC barrel jack. Key Feature...
9V to Barrel Jack Adapter
A 9V battery clip adapter with a standard 5.5 × 2.1 mm centre-positive barrel jack. Use it to power any device that accepts 9V input through an onboard barrel jack connector. Key Features 9V Battery Snap – Standard clip fits all 9V batteries Barrel Jack Output – 5.5 × 2.1 mm centre-positive c...
9V Snap Connector
A classic 9V battery snap connector with bare wire leads, 15 cm in length. Pair it with a DC Barrel Jack Adapter – Male to power an Arduino directly from a 9V battery. Key Features Bare Wire Leads – Solder or connect directly to your project Cable Length – 15 cm Standard 9V Snap – Fits all s...
3×AA Battery Holder(PH2.0-2P)
This battery holder connects 3× AA batteries in series, providing approximately 4.5V from alkaline cells. It features a PH2.0-2P connector with a 15cm wire lead, making it compatible with DFRobot boards and other devices that use the PH2.0 power interface. Key Features 3× AA Series Configurati...
4 x AA Battery Holder with 2.1mm Plug and On/Off Switch
A 4×AA battery holder with a built-in on/off switch and a 13cm (5″) power cable terminating in a centre-positive 2.1mm DC barrel jack. Provides convenient portable power with easy switching for development boards and projects that accept a standard DC barrel jack input. Delivers approximately 4....
