All Products
Showing 1-20 of 60 products
1.12 Mono OLED (128x128, white/black) Breakout
This crisp 1.12″ monochrome OLED breakout features a 128×128 pixel white-on-black display, ideal for adding graphing, readouts, and basic icons to your project. OLEDs deliver excellent contrast and brightness, and this compact module fits easily into space-constrained builds. The breakout connec...
Adafruit Monochrome 1.12" 128x128 OLED Graphic Display
·
The Adafruit Monochrome 1.12" OLED Display packs a 128×128 pixel resolution into a compact screen with the high contrast and crisp readability that OLED technology is known for. Each of the 16,384 white pixels is individually addressable, producing sharp text and graphics with no backlight requir...
SparkFun Micro OLED Breakout (Qwiic)
·
A compact monochrome OLED breakout board featuring a 64×48 pixel blue-on-black display (0.66" diagonal). Equipped with two Qwiic connectors for solderless I²C connection, plus 0.1"-spaced header pins for breadboard use. The board includes I²C pull-up and address jumpers on the back for flexible c...
Micro OLED Breakout with Headers
·
Add a tiny, crisp OLED to your next microcontroller project without taking up much space. This breakout carries a monochrome Blue-on-Black display that is only 64 pixels wide by 48 pixels tall, yet still has room for useful graphics, status screens and simple game interfaces.It is easy to drive f...
OLED Breakout Board - 16-bit Color 1.5 w/microSD holder
·
A 1.5" colour OLED breakout with 128×128 RGB pixels and 16-bit colour depth, driven by the SSD1351 controller. Because it uses OLED technology, there is no backlight — blacks are truly black with excellent contrast. The fully assembled breakout includes a built-in boost converter (12V for the OLE...
SparkFun Micro OLED Breakout
The SparkFun Micro OLED Breakout Board breaks out a small monochrome, blue-on-black OLED. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. This breakout is perfect for adding graphics to your next Arduino projec...
Monochrome 0.96 128x64 OLED graphic display
·
This 0.96" monochrome OLED display packs 128×64 individually controllable white pixels into a compact, highly readable screen. Because OLED pixels produce their own light, no backlight is needed — resulting in excellent contrast, low power consumption, and crisp visuals even at this small size. ...
Monochrome 1.3 128x64 OLED graphic display
·
A crisp 1.3" monochrome OLED display with 128×64 white pixels, driven by the SSD1306 controller. Each pixel is individually addressable, and because OLEDs emit their own light, no backlight is needed — resulting in excellent contrast and readability in a compact form factor. The breakout board i...
Monochrome 128x32 I2C OLED graphic display
·
A compact 0.96" (24.4 mm diagonal) monochrome OLED graphic display with 128 × 32 pixel resolution. Driven by the SSD1306 controller over I2C, each white OLED pixel is individually addressable, producing high-contrast, self-illuminated output with no backlight required. The breakout board include...
Micro:bit Tinker Kit
The Micro:bit Tinker Kit is a comprehensive starter set that pairs a BBC micro:bit board with a breakout board, sensors, an OLED display, and other components for hands-on electronics projects. It comes with rich tutorial cases and Microsoft MakeCode certified packages, making it ideal for classr...
Adafruit 12V Bias Voltage Boost Converter - TPS61040
·
The Adafruit 12V Bias Voltage Boost Converter uses the TI TPS61040 to generate 12V DC from as little as 3V input. This compact breakout is ideal for generating the bias voltage needed by OLED displays, LED string backlights, and FLASH/EEPROM reprogramming — without requiring a separate 12V supply...
OLED Breakout Board - 16-bit Color 0.96 w/microSD holder
·
We love our black and white monochrome displays but we also like to dabble with some color now and then. Our new 0.96" color OLED displays are perfect when you need an ultra-small display with vivid, high-contrast 16-bit color. The visible portion of the OLED measures 0.96" diagonal and contains ...
ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier
·
Add high-speed analog-to-digital conversion to any microcontroller with the ADS1015 breakout. This 12-bit ADC delivers 3,300 samples per second over I2C, with four single-ended or two differential input channels and a built-in programmable gain amplifier (up to 16×) for boosting small signals. T...
MCP4725 Breakout Board - 12-Bit DAC w/I2C Interface
·
The MCP4725 breakout board provides a 12-bit digital-to-analogue converter (DAC) over I2C. Send a digital value and the VOUT pin outputs the corresponding analogue voltage — ideal for generating waveforms, adjustable bias points, or anywhere you need a true analogue output rather than PWM. The o...
SparkFun Qwiic Kit for Raspberry Pi
The SparkFun Qwiic Kit for Raspberry Pi provides everything you need to start using I2C sensors and displays with your Raspberry Pi via the Qwiic connector system. The kit includes a Qwiic HAT that adds four Qwiic connectors to your Pi's GPIO header, along with three sensor/display breakouts and ...
SparkFun Photon Micro OLED Shield
The SparkFun Photon Micro OLED Shield breaks out a small monochrome, blue-on-black OLED to use with your Photon module. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. This shield is perfect for adding graphics...
Monochrome 0.91”128x32 I2C OLED Display with Chip Pad
A compact 0.91-inch monochrome OLED display module with 128×32 white self-illuminating pixels, driven by the SSD1306 over I2C. The chip-on-back pad design and ultra-narrow PCB (41 × 12 mm) make it ideal for wearables, mini consoles, and space-constrained embedded projects where a small, clear dis...
SparkFun Qwiic Starter Kit for Raspberry Pi
The SparkFun Qwiic Starter Kit for Raspberry Pi provides everything you need to get started with I²C sensors on your Raspberry Pi using the Qwiic connect system. The kit includes the Qwiic pHAT v2.0, which adds four Qwiic connectors to your Pi's GPIO header, plus three sensor breakouts and connec...
12mm Coin Cell Breakout w/ On-Off Switch
·
A breakout board with a CR1220 coin cell battery holder, an on/off switch, and 0.1″ pitch breakout pins. Ideal for powering very low-current projects or providing switchable battery backup for a real-time clock (RTC) module. The board breaks out four pins: two ground pins, one switched power pin...
Adafruit 12 x Capacitive Touch Shield for Arduino - MPR121
·
The Adafruit Capacitive Touch Shield brings 12 channels of capacitive touch sensing to any Arduino using the MPR121 chip. Each sensor has a "figure 8" pad with holes designed for quick alligator clip connections — attach one end to the shield and the other to any conductive object like metal, fru...
