All Products

SKU: DF-SEN0360

F1031V Mass Air Flow Sensor adopts thermodynamic principle to detect flow rate of gas medium in the flow channel, with high precision and good repeatability. It comes with built-in temperature sensor to provide temperature compensation for measured data. Meanwhile, the sensor has liner analog vol...

SKU: SF-COM-11813

Have you ever been listening to music on your MP3 player and a song you don’t want to listen to comes on but you don’t want to reach into your bag to change the track? The 5 Button Fabric Button Pad, from Sensing Tex, is a great way to incorporate a basic media UI into your clothing, furniture, o...

SKU: AF-2808

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.4" PiTFT HAT and Adafruit Pi A+  case base! This Faceplate and Buttons Pack is a simple way to enclose your 2.4" PiTFT and Pi safely and in style. The faceplate replaces the normal 'top...

SKU: JU-W-LP245

You like a little elegance. You appreciate the finer things in life and you're not ashamed of it. You deserve nothing but the best and how dare anyone question you about it either! As far as anyone is concerned, you deserve it all. You're Fancy as Fuck! This colourful, gold-backed, hard enamel la...

SKU: LB-LS1727

Want to keep your Raspberry Pi cool? Try this 5V Mini Cooling Fan and prevent your hard-working Pi from overheating! Of course, it's also great for use with any small computer or FPGA or motor driver or anything that needs cooling. Plug the fan directly into your Raspberry Pi's 5V+GND GPIO pow...

SKU: JU-JU-W-LP324 · MPN: JU-W-LP324

Because pictures can be literature and emotions don't always need 1000 words. Your shelves are stacked with heroes, heartbreak, and epic tales told in panels. This pin is for the readers who live for visual storytelling – your ultimate fangirl/fanboy/fan-them badge of honour. Details Material:...

SKU: SF-CAB-19718

This USB-A to USB-C cable features a built-in LCD display on the USB-C connector that shows real-time power draw, so you can monitor charging current at a glance. With support for up to 6A output and USB 2.0 data rates (480 Mbps), it handles fast charging and data transfer in a single durable cab...

SKU: SF-CAB-19717

A USB-C to USB-C cable with a built-in LCD display that shows real-time power draw — so you can see exactly how much power your device is pulling. Supports up to 100W USB PD (Power Delivery) at 5A, with USB 2.0 data transfer at 480 Mbps, all in a durable nylon-braided 1.2 m (4 ft) cable. Key Fea...

SKU: AF-1766

The "poor man's" accelerometer/motion sensor! These spring-vibration switches are high sensitivity non-directional vibration induced trigger switches. Inside is a very soft spring coiled around a long metal pin. When the switch is moved, the spring touches the center pole to make contact. S...

SKU: AF-3173

A simple, solder-on terminal block set sized to fit Adafruit Feather boards and FeatherWings. These 0.1″ pitch terminal blocks let you make secure, screw-down wire connections without soldering wires directly to your board — making projects easier to build, maintain, and modify. Compatible with ...

SKU: AF-5629

Introducing the FeatherS2 Neo - The full-featured ESP32-S2-based development board in a Feather format from Unexpected Maker. The FeatherS2 Neo is a powerhouse, fully souped up with 4 MB of Flash memory (for firmware and file storage) and 2 MB of QSPI-based external PSRAM so you can have massive ...

SKU: SF-PRT-15187

These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather shields on top of your ESP32 Thing Plus or plu...

SKU: AF-2890

This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are two! The magic of the Doubler comes when stacking a Feather and another board on top of the Doubler so you can work with both boards si...

SKU: AF-2900

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feat...

SKU: AF-2884

The FeatherWing Proto is a prototyping add-on board compatible with all Adafruit Feather boards. It provides duplicate breakouts for every Feather pin, a grid of proto holes for custom circuitry, and connected pad strips for GND and 3.3V — everything you need to add custom components to your Feat...

SKU: AF-3417

The FeatherWing Tripler lets you connect a Feather board to two FeatherWings side by side — no stacking headers needed. All three sets of pins are cross-connected, with dedicated GND and 3.3 V strips for easy power distribution. Additional proto holes are available for custom wiring. Comes as a ...

SKU: AF-3614

Harder, better, faster, stronger! All the control and customization for your robot project. The Parallax Feedback 360° High Speed Servo has the functionality of a light-duty servo, continuous rotation servo, high-speed servo, and encoder in one convenient package - what a triple thre...

SKU: AF-5136

This Felt Padding is for if you want extra cushioning for your DIY keeb. This is specifically designed for the common "GH60" / 60% keyboard layout.You will still need a GH60 enclosure of choice, PCB, and all the components. It makes the perfect mattress support to protect your keyb...

SKU: AF-5293

A soft grey felt sleeve case sized to fit the Raspberry Pi 400 and similarly sized compact keyboards. The wool-like felt fabric provides cushioning and scratch protection, while a strong elastic band keeps the case securely closed during transport. Fits keyboards and devices up to 310 × 150mm (1...

SKU: PL-1930

A pack of 100 female crimp pins designed for use with 0.1" (2.54mm) pitch crimp connector housings. Crimp these pins onto 22–28 AWG wires and snap them into housings to create custom cables compatible with standard headers and solderless breadboards. Key Features 0.1" (2.54mm) Pitch – Compatib...