All Products

SKU: LB-LS0317-47

These are your run-of-the-mill 1/4 Watt  5-band resistors. Commonly used in breadboards and other prototyping applications, these 47 ohm resistors are great for general use. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have ...

SKU: LB-BK-LR0259-10

A bulk pack of ten 9-gram micro servos — an affordable way to stock up for robotics, mechatronics, and RC projects. Each servo includes a ~25cm cable with a standard 3-pin female header, plus a full set of horn and screw accessories. These compact servos deliver 1.6 kg/cm of torque at 6.0V with ...

SKU: LB-BK-LR0293-1

Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself.This is a bulk pack of 10 lots with 10 in each = 100 in total! Whether you’re just trying to make a few quick connections to test your circuit or having tr...

SKU: LB-BULK-MICRO

A bulk pack of 300 BBC micro:bit V2.2 boards, ideal for schools, makerspaces, and institutions rolling out coding and STEM programmes at scale. Each micro:bit is individually packaged for easy distribution in classrooms and workshops. The micro:bit V2.2 features a built-in speaker, microphone, c...

SKU: TB-HB6065

4 cases in the range. The two smaller sizes have moulded in square cable entries on each end, and holes for screw bolts to mount the case. Specifications Width 65mm Height 27mm ...

SKU: LB-BK-LR0282

Description This Light Dependant Resistor (LDR) can be used to easily measure ambient light with your Arduino or other board with analog input. You will need to set this up as a voltage divider with a resistor of around 10KΩ.   Specification:Maximum voltage: 150V, DCMaximum wattage: 90mWO...

SKU: LB-LS0014-BAG

A bulk pack of 250 through-hole RGB LEDs in a 10 mm clear epoxy package. Common cathode configuration with individually addressable red, green, and blue elements for full-colour mixing. Specifications LED Size – 10 mm, clear epoxy lens Configuration – Common cathode Forward Voltage (R / G / ...

SKU: LB-BK-356

A 10-pack of 10 kΩ trim potentiometers, perfect for breadboarding and prototyping. They feature a long, grippy adjustment knob and 0.1″ pin spacing that plugs directly into breadboards or perfboards with ease. Specifications Resistance – 10 kΩ Pin Spacing – 0.1″ (2.54 mm), breadboard compatib...

SKU: AF-6019 · MPN: ADA6019

DescriptionThis accessory simplifies wiring sensors to your Bus Pirate 5, featuring snap-open quick connects that easily plug into the BP5’s header port. When you’re ready to dive into a project, these quick connector boards allow for immediate connections.The KF141 quick connector block is reno...

SKU: AF-6020 · MPN: ADA6020

DescriptionElevate your Bus Pirate 5 experience with this premium accessory. This keyed and locking probe cable, crafted from soft and flexible silicone-coated wire, connects seamlessly to the Bus Pirate's 10-pin main header. The 2.54mm Dupont connectors at each end are compatible with a variety...

SKU: AF-6021 · MPN: ADA6021

The Bus Pirate 5 SOIC/SOP8 SPI Flash Adapter makes it easy to program bare SPI flash memory chips without clips or soldering. The spring-loaded ZIF socket accepts SOP8 packages in both 150 mil and 208 mil widths — the most common flash memory form factors — allowing quick chip insertion and remov...

SKU: AF-238

This is a interface cable designed for Bus Pirate which can makes it easier to connect the Bus Pirate to a circuit and get hacking!

SKU: SF-CAB-09556

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The lea...

SKU: SF-TOL-12942

The Bus Pirate v3.6a, created by Ian Lesnet, is a troubleshooting tool that communicates between a PC and any embedded device over 1-wire, 2-wire, 3-wire, UART, I2C, SPI, and HD44780 LCD protocols - all at voltages from 0-5.5VDC. This product eliminates a ton of early prototyping effort when w...

SKU: AF-1160

Cute as a button, these button-head hex screws are what we suggest for putting together a project with our slotted extruded aluminum. Use a 2.5mm hex wrench to attach/detach. This length is good for attaching something about 2mm/0.08" thick to 20x20 extrusion.Comes in a pack of 50. M4 20 threads/...

SKU: SF-COM-07836

This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple color...

SKU: SF-COM-08033

This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad. Now with f...

SKU: SF-COM-07835

A translucent silicone rubber button pad with 16 buttons in a 4×4 grid. Each button has a hole underneath that accepts a standard 3 mm or 5 mm LED, allowing you to backlight individual buttons with any colour — including RGB using tri-colour LEDs. The pad can be split into four separate 4-button...

SKU: LB-LR0022

It's a push button!A push button with resistors and breadboard friendly layout.**Push Button Pinout:**- Signal (High when button pushed)- Positive- Ground**Specifications:**- 600mW MAX (50mA at 12v)

SKU: AF-1536

A breadboard-friendly active buzzer module that produces a loud 2 kHz tone when you apply 3–5V. Unlike a passive piezo element, this buzzer has built-in driver circuitry — no oscillating signal needed, just apply power and it beeps. Key Features Active Buzzer – Built-in oscillator circuit, no ...