Voltage Regulators & Converters

SKU: LB-LS6795 | Brand: Little Bird

8-90V to 5V 5A DC-DC Step-Down Converter (25W, USB-C)This compact and efficient DC-DC step-down converter is designed to take an input voltage from 8V to 90V and regulate it down to a stable 5V output at up to 5A (25W...

SKU: DF-DFR0753 | Brand: DFRobot

This 40W high power DC-DC Buck converter offers a 6~14V input voltage range and up to 5V/8A output. Featuring a small body, high conversion ratio, strong heat dissipation, and large current output, the module is compa...

SKU: DF-DFR0831 | Brand: DFRobot

INTRODUCTIONThis is a 20W DC-DC buck converter power module with 7~24V input and 5V/4A output(Max). The high conversion efficiency and on-board 6 output ports make it suitable for connecting multiple devices like, lar...

SKU: LB-AAA-BATTERY | Brand: Little Bird

A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your E-Textile circuit. ...

SKU: DF-DFR0876 | Brand: DFRobot

The Raspberry Pi PoE+ HAT adds Power over Ethernet capabilities to your Raspberry Pi 3B+ or 4B, allowing you to power and connect your Pi to the network using a single Ethernet cable. This eliminates the need for a se...

SKU: DF-DFR0884 | Brand: DFRobot

This dual-USB step-down buck converter accepts 8–32V DC input and delivers a regulated 5V output at up to 3A across two USB Type-A ports simultaneously. With over 85% conversion efficiency and built-in reverse-connect...

SKU: AF-6106 | Brand: Adafruit

The Adafruit bq25185 with 5V Boost is an all-in-one charging and power supply board that supports USB, DC, and solar charging with an integrated 5V boost converter. It is designed for projects that need a stable 5V su...

SKU: LB-LS5548 | Brand: Little Bird

Introducing our Compact DC-DC Voltage Converter Module, a powerful and efficient solution for boosting your power supply needs. This tiny powerhouse is designed to elevate a low 1-5V input to a stable 5V output, perfe...

SKU: DF-DFR1202 | Brand: DFRobot

A high-efficiency DC-DC step-down (buck) converter that accepts 6–24 V input and delivers a stable 5 V output at up to 16 A. With over 90% conversion efficiency at typical loads and output ripple below 20 mV, it provi...

SKU: SF-COM-21256 | Brand: SparkFun

The SparkFun BabyBuck Regulator Breakout delivers a regulated 5V output from a 6–32V input in an ultra-compact 0.63" × 0.52" form factor. Based on the AP63357 synchronous buck converter from Diodes Inc., it provides u...

SKU: AF-4920 | Brand: Adafruit

This little buck converter based on the TPS62827 is super handy, taking up to 5.5V input and providing a 3.3V output with up to 2A current. It's great for supplying power to hungry 3.3V voltage circuits from a range o...

SKU: AF-4711 | Brand: Adafruit

The AP3429A Buck Converter Breakout steps down 3.4–5.5V input to a stable 3.3V output at up to 1.2A, with 90–95% efficiency. It's ideal for powering 3.3V circuits from LiPo batteries, 3× alkaline cells, or USB power s...

SKU: SF-COM-21255 | Brand: SparkFun

The SparkFun 5V Buck Regulator Breakout features the AP63357 from Diodes Inc., a 3.5A synchronous buck converter with a wide input voltage range of 3.8V to 32V. The fully integrated 74mΩ high-side power MOSFET/40m...

SKU: DF-DFR1026 | Brand: DFRobot

This is a DC charging and discharging integrated module, with 5V normally open output, which is not affected by load access and has a maximum load current of 2A. It features 4 levels of charge/discharge electricity in...

SKU: DF-DFR0913 | Brand: DFRobot

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 3.3V, making it easy to interface industrial sensors and PLC outputs with Arduino, Raspberry Pi, and other 3.3V microcontrolle...

SKU: AF-4654 | Brand: Adafruit

The Adafruit MiniBoost 5V @ 1A is a compact inductor-based boost converter that delivers up to 1 A of regulated 5 V output from a 2–5 V input. About the size of a linear regulator, it's perfect for powering microcontr...

SKU: SF-COM-18375 | Brand: SparkFun

This is a high grade DC Buck converter that inputs 6 to 12V and outputs 5V up to 3A or 15W. With good thermal performance and protection, this DC block is perfect for battery applications (such as SLAs or LFPs) that n...

SKU: DF-DFR1208 | Brand: DFRobot

##Introduction This DC-DC step-down converter module is designed to efficiently reduce a high input voltage (15-24V) to a stable 12V output, supporting up to 12A of current. The module offers high conversion efficienc...

SKU: DF-DFR0914 | Brand: DFRobot

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 5V, making it easy to interface industrial sensors and PLC outputs with Arduino and other 5V microcontrollers. Each channel fe...

SKU: SF-COM-18376 | Brand: SparkFun

An industrial-grade DC buck-boost converter that accepts 8–40V input and delivers a regulated 12V output at up to 3A (36W). Ideal for battery-powered systems where input voltage varies — such as SLA or LiFePO4 batteri...