Batteries

SKU: WS-19694 | Brand: Waveshare

Uninterruptible Power Supply For Pico Keeps Your Pico Running While Recharging, Monitoring Battery Status Via I2C Features At A Glance The Pico-UPS-A is a dedicated UPS (Uninterruptible Power Supply...

SKU: AF-1781 | Brand: Adafruit

A 3.7V 2,200 mAh lithium-ion cylindrical battery with built-in protection circuitry for over-voltage, under-voltage, and over-current protection. Slim enough to fit into many project enclosures and includes a JST 2-pi...

SKU: AF-353 | Brand: Adafruit

A high-capacity 3.7 V lithium-ion battery pack built from three 2200 mAh 18650 cells connected in parallel, providing 6600 mAh of total capacity. The cells are spot-welded to a built-in protection circuit that guards ...

SKU: LB-LS1558 | Brand: Little Bird

A standard 18650 lithium-ion rechargeable battery with a built-in protection circuit for safe operation. The integrated PCB provides overcharge, over-discharge, and short-circuit protection, making it a reliable power...

SKU: TB-SB2300 | Brand: Little Bird

A 14500-size rechargeable lithium-ion battery with 800mAh capacity and 3.7V nominal voltage. The 14500 form factor is the same size as a standard AA battery, making it a common choice for LED torches and other compact...

SKU: AF-4288 | Brand: Adafruit

Here's a hand-held-size rechargeable battery pack for your Raspberry Pi (or Metro, or anything else that uses 5V!). This pack is intended for providing a lot of power to a smartphone, tablet, etc, but we found it d...

SKU: DF-FIT0539 | Brand: DFRobot

A robust battery holder designed to house three 18650 lithium-ion cells in series, delivering a nominal 11.1V output through a standard DC 2.1mm power jack. Ideal for powering projects, robots, and portable electronic...

SKU: DF-DFR0969 | Brand: DFRobot

A dual-slot 18650 battery holder with built-in charging and regulated power outputs, perfect for powering microcontrollers, sensors, and portable electronics projects. Simply install two 18650 lithium batteries and us...

SKU: DF-DFR0208 | Brand: DFRobot

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge 3.7V LiPo battery at a rate of 500mA per hour. It is designed to charge single-cel...

SKU: LB-LS4126-LS1558 | Brand: Little Bird

FeaturesIndependent Charging: Each of the four slots operates independently, allowing simultaneous charging of different battery sizes or charge levels.LED Indicator Lights: Red – Charging Green – Fully Charged S...

SKU: AF-259 | Brand: Adafruit

This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833. It uses a USB mini-B for connection to any computer or 'USB wall adapter'. Charging is performed in three stages: first a precondi...

SKU: SF-PRT-12900 | Brand: SparkFun

This is an incredibly simple two cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with...

SKU: DF-FIT0611 | Brand: DFRobot

This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargeable battery to provide more than 8 hours continuous power for Maqueen....

SKU: SF-PRT-13113 | Brand: SparkFun

This is a PCB mount clip to hold a 18650 Lithium Ion Cell battery. Each battery holder is sold in single units, you’ll need two for each battery. These work great for larger, high capacity applications where a drop-in...

SKU: TB-MB3703 | Brand: Little Bird

This 4-channel universal charger handles Ni-MH, Ni-Cd, Li-ion, and LiFePO4 cells simultaneously across four independent slots. Each battery is monitored individually by a microprocessor with precise Pulse Width Modula...

SKU: AF-5397 | Brand: Adafruit

The Adafruit LiIon/LiPoly Charger BFF is a compact battery charging add-on designed to mount directly onto the back of any QT Py board. It makes portable power simple — plug in a standard 3.7 V/4.2 V lithium battery, ...

SKU: AF-2089 | Brand: Adafruit

A snap-in battery holder for Sony NP-F series camcorder batteries, with a pre-attached 2.1 mm DC barrel plug for powering 7 V DC devices. Clip in a compatible Li-Ion battery pack and connect directly to robots, Arduin...

SKU: AF-2272 | Brand: Adafruit

This battery holder is designed to clip and hold Panasonic camcorder lithium-ion battery packs, providing a convenient high-capacity power source for custom projects. Simply snap your battery in, and use your existing...

SKU: LB-OWL-CHAR | Brand: Little Bird

A dual-slot 18650 battery charger bundled with two 3.7 V 2000 mAh lithium-ion rechargeable batteries. The charger features overcharge protection circuitry to safely charge standard 18650 cells, making it a convenient ...

SKU: PR-PIM557 | Brand: Little Bird

This SHIM provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port. Solder this neat little square to th...