Batteries
Shop batteries for your electronics projects in Australia, including LiPo, Li-Ion, NiMH, AA, AAA, coin cell, and 18650 rechargeable batteries. We also stock battery holders, chargers, and battery packs for every setup.
Whether you're powering a robot, wearable, IoT sensor, or classroom STEM kit, find the right battery and holder with convenient connectors like JST. Reliable power for makers, hobbyists, and educators — shipped from Australia.
USB Li-Ion Power Bank with 2 x 5V Outputs @ 2.1A - 5000mAh
SKU: AF-4288 | Brand: Adafruit
Here's a hand-held-size rechargeable battery pack for your Raspberry Pi (or Metro, or anything else that uses 5V!). This pack is intended for providing a lot of power to a smartphone, tablet, etc, but we found it d...
Delivered by Fri 10 Jul
2-Way 18650 Battery Holder
SKU: DF-DFR0969 | Brand: DFRobot
A dual-slot 18650 battery holder with built-in charging and regulated power outputs, perfect for powering microcontrollers, sensors, and portable electronics projects. Simply install two 18650 lithium batteries and us...
Delivered by Wed 1 Jul
Lithium Battery Charger
SKU: DF-DFR0208 | Brand: DFRobot
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge 3.7V LiPo battery at a rate of 500mA per hour. It is designed to charge single-cel...
Delivered by Wed 1 Jul
Smart Charger for 18650 4.2V Li-ion battery with 2 x 18650
SKU: LB-LS4126-LS1558 | Brand: Little Bird
FeaturesIndependent Charging: Each of the four slots operates independently, allowing simultaneous charging of different battery sizes or charge levels.LED Indicator Lights: Red – Charging Green – Fully Charged S...
Delivered by Mon 22 Jun
USB LiIon/LiPoly charger [v1.2]
SKU: AF-259 | Brand: Adafruit
This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833. It uses a USB mini-B for connection to any computer or 'USB wall adapter'. Charging is performed in three stages: first a precondi...
Delivered by Mon 22 Jun
CR123A Li-ion Battery Holder for micro: Maqueen
SKU: DF-FIT0611 | Brand: DFRobot
This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargeable battery to provide more than 8 hours continuous power for Maqueen....
Delivered by Wed 1 Jul
LiPo SHIM for Pico
SKU: PR-PIM557 | Brand: Little Bird
This SHIM provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port. Solder this neat little square to th...
Out of stock
LiPo Amigo (LiPo/LiIon Battery Charger) Pro
SKU: PR-PIM612 | Brand: Little Bird
A range of compact, convenient USB-C LiPo/LiIon battery chargers, perfect for feeding hungry batteries. We've spent quite a lot of time at Pirate HQ over the last few weeks figuring out ways to charge up batteries fo...
Out of stock
