Batteries
Shop batteries for your electronics projects in Australia, including LiPo, Li-Ion, NiMH, AA, AAA, coin cell, and 18650 rechargeable batteries. We also stock battery holders, chargers, and battery packs for every setup.
Whether you're powering a robot, wearable, IoT sensor, or classroom STEM kit, find the right battery and holder with convenient connectors like JST. Reliable power for makers, hobbyists, and educators — shipped from Australia.
Lithium Ion Battery Pack - 3.7V 6600mAh
SKU: AF-353 | Brand: Adafruit
A high-capacity 3.7 V lithium-ion battery pack built from three 2200 mAh 18650 cells connected in parallel, providing 6600 mAh of total capacity. The cells are spot-welded to a built-in protection circuit that guards ...
Delivered by Tue 16 Jun
3-AA Battery Holder, Enclosed with Switch
SKU: PL-1152 | Brand: Pololu
An enclosed battery holder for three AA cells with a built-in on/off switch. The snap-on lid slides over the batteries to fully enclose them, keeping the cells secure during use. Provides approximately 4.5 V with thr...
Delivered by Tue 16 Jun
3-AAA Battery Holder, Enclosed with Switch
SKU: LB-1147 | Brand: Little Bird
An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid keeps batteries secure during use, and the integrated switch lets you toggle power without disconnecting leads. Provides a...
Delivered by Tue 16 Jun
3xAA Battery Holder
SKU: DF-FIT0610 | Brand: DFRobot
This enclosed battery holder takes 3× AA batteries in series, providing approximately 4.5V from alkaline cells or 3.6V from NiMH/NiCd rechargeables. It features a built-in on/off switch and a sliding, removable cover ...
Delivered by Tue 16 Jun
Battery Holder 3xAA with Cover and Switch
SKU: SF-PRT-10891 | Brand: SparkFun
This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...
Delivered by Tue 16 Jun
3 x AAA Battery Holder with Switch
SKU: LB-LS3337 | Brand: Little Bird
An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid fully covers the batteries, keeping them secure during use. Wire leads allow you to connect directly to your project. Thre...
Delivered by Tue 16 Jun
MicroUSB Battery Holder (3xAA)
SKU: DF-FIT0362 | Brand: DFRobot
This battery holder can hold 3 AA batteries which provides 3.6V rechargeable battery pack with NiMH / NiCd cells or 4.5V battery pack with Alkaline cells. You will be able to power your Arduino with this battery hold...
Delivered by Tue 16 Jun
Tattu 1050mAh
SKU: LB-Tattu | Brand: Little Bird
Tattu 3S 11.1V 1050mAh 75C LiPo Battery (XT-60)The Tattu 3S 1050mAh LiPo battery is a compact powerhouse designed with Micro UAVs and high-performance RC applications in mind. With a discharge rate of 75C (and a burst...
Delivered by Tue 16 Jun
Battery Holder 3xAA with Cover and Switch - JST Connector
SKU: SF-PRT-18769 | Brand: SparkFun
This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover as well as an ON/OFF switch that can be used to control power to your project. The ...
Delivered by Tue 16 Jun
