Audio

SKU: DF-DFR0299 | Brand: DFRobot

Sing for the moment! The DFPlayer Mini is a small and low cost MP3 module player with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speake...

SKU: LB-PT-SPEAKER | Brand: Little Bird

A compact, ultra-thin speaker ideal for portable electronics, embedded projects, and audio prototyping. Features a PH2.54 terminal connector with a 20 cm wire lead for easy integration. Specifications Power – 3 W ...

SKU: AF-2130 | Brand: Adafruit

The Adafruit Mono 2.5W Class D Audio Amplifier delivers powerful sound from a tiny package. Based on the PAM8302 chip, it drives 4–8 ohm speakers at up to 2.5 W with over 90% efficiency — making it ideal for portable ...

SKU: PR-PIM485 | Brand: Little Bird

Pump out some mini beats with Pirate Audio Speaker! This diminutive sound system has an I2S DAC, amp, mini mono speaker, high-res display, and playback control buttons. Pirate Audio Speaker is perfect for making a ...

SKU: SF-COM-21311 | Brand: SparkFun

A compact, thin speaker ideal for projects where space is tight. At just 28 mm in diameter and approximately 4 mm thick, it fits into enclosures and wearables where standard speakers won't. The pre-wired 180 mm cable ...

SKU: PI-COM1600 | Brand: Pimoroni

A 3-inch (77.8 mm) full-range speaker rated at 5 W with a 4 Ω impedance. Compact enough to embed in custom enclosures, arcade cabinets, internet radio builds, and other audio projects. Key Features 5 W Power – Soli...

SKU: AF-1713 | Brand: Adafruit

Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use th...

SKU: AF-1739 | Brand: Adafruit

This large enclosed piezo element (30 mm diameter) converts vibration to voltage and voltage to vibration, making it useful both as a buzzer for generating tones and as a sensor for detecting knocks and impacts. The e...

SKU: AF-1063 | Brand: Adafruit

A well-designed electret microphone amplifier breakout built around the Maxim MAX4466 op-amp, specifically engineered for microphone amplification with excellent power supply noise rejection. The board comes fully ass...

SKU: AF-1314 | Brand: Adafruit

A 3-inch (76.2 mm) speaker cone with 4 Ω impedance and 3 W power handling. Four mounting tabs spaced 60 mm apart make it easy to secure in enclosures or project housings. Pairs well with Class D amplifier boards for c...

SKU: LB-BK-SPEAKER | Brand: Little Bird

A bulk pack of 20 breadboard-compatible speakers — a Little Bird exclusive. Each speaker comes with jumper wires and standard header pins pre-soldered, so it plugs directly into a breadboard with no extra wiring neede...

SKU: LB-SPEAKER-WHITE | Brand: Little Bird

The speaker itself is 3.81m (1.5") in diameter and is perfect for any project where you need an 8Ω impedance, and are using 0.25W of power. The speakers are rated at 0.25W, with a maximum input of 0.5W (printed wat...

SKU: DF-DFR1173 | Brand: DFRobot

This compact voice prompt module integrates an intelligent MP3 playback chip with a 1 W speaker in a tiny 30 × 11 mm package. It supports MP3, WAV, and WMA hardware decoding with 16 MB of on-board storage that retains...

SKU: DF-DFR0034 | Brand: DFRobot

This is a new Arduino compatible Analog Sound Sensor. Sound Sensor is typically used in detecting the loudness in ambient, the Arduino can collect its output signal and actuate accordingly. You may use it to make some...

SKU: SF-PRT-20660 | Brand: SparkFun

This is a small 15mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces.This through-hole speaker is great for projects where you don't have...

SKU: AF-1313 | Brand: Adafruit

Listen up! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 8 ohm impedance and 1W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm a...

SKU: DF-DFR0064 | Brand: DFRobot

The DFRobot 386AMP audio amplifier module is based on the LM386 low-voltage audio power amplifier IC. With a fixed voltage gain of 26 dB (20× amplification) and static power consumption of only 24 mW at 6V, it's well ...

SKU: LB-LS6842 | Brand: Little Bird

This compact audio solution pairs the MAX98357 I2S digital amplifier with a high-quality 3W 8Ω 3070 full-range speaker, delivering clear and powerful sound from any I2S-enabled microcontroller. The MAX98357 accepts di...

SKU: DF-SEN0487 | Brand: DFRobot

This tiny MEMS microphone has an amplifier gain of 66. When there is no sound detected, it outputs voltage around 0.66*VCC. When speaking, you can easily get the acoustic waveform by ADC sampling. The module can be us...

SKU: SS-101020023 | Brand: Seeed Studio

The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted b...