Play the shield pls notice that
  • Be sure to plug the WRTnode into the shield as the picture, Be sure DONOT go wrong direction.
  • For the power we recommend a 5V USB-interface adapter higher than 1000mA, when more USB devices plugged in, we recommend a 2A or 2.5A adapter, such as your ipad one.
  • How to with U-Boot web-page fail-safe de-brick button:
  • An original WRTnode U-Boot WRTnode_U-Boot_instructions will provide this, if there's another U-Boot have been flashed, this section is invalid.
 
Instruction:
  • Set your computer Ethernet with the IP: 192.168.1.100 and the mask: 255.255.255.0, connect computer and the shield with RJ45 wire.
  • Push the button( in this case to prevent misoperation, we use a very tight button, please make sure to hold the button tightly with nail or blunt object.)
  • Power on
  • WRTnode sense the pushed button, the led indication on WRTnode will flash for about 5 seconds.
 
While, we could use web browser in the computer with URL: http://192.168.1.1/ to flash the ROM.
 
Specification:
  • 5V micro-USB DC-in
  • Extend 4 standard USB port
  • 1 RJ45 100M Ethernet port( to be a LAN port or WAN port as you define)
  • other interfaces:
  • UART
  • I2C( while could multiused as GPIO * 2)
  • SPI
  • GPIO*12
  • Uboot web-page fail-safe de-brick button
  • 5v and 3.3v pins

 

(SS-114990197)

SKU SS-114990197
Brand Seeed Studio

Be The First To Review This Product!

Help other Little Bird Company Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category