All Products

SKU: SF-KIT-28012 · MPN: KIT-28012

This classroom set provides ten DIY Experiential Robotics Platform hardware kits for hands-on robotics lessons, team activities and project-based STEM learning. The XRP platform is designed to support beginner through advanced tasks while building skills in science, engineering and problem-solvin...

SKU: SF-PRT-28005 · MPN: PRT-28005

This spacer board gives your FPGA stack a little extra breathing room. It adds 5.6mm of space between stacked boards, helping make room for the included heatsink.It is also handy when you need clearance for cables between the Ft and port 1 on the Hd, keeping your stacked Alchitry setup easier to ...

SKU: SF-PRT-28007 · MPN: PRT-28007

Add a bit of protection and a cleaner finish to your Alchitry board with this standoff hardware. It is designed for use with compatible Alchitry boards, helping lift the PCB off your work surface or enclosure base.The bolts protrude about 2mm below the board, which is just further than the lowest...

SKU: SF-PRT-19167 · MPN: PRT-19167

This is a compact E10 mini screw bulb holder supplied with a matching bulb, handy for simple lighting projects, demonstrations and low-voltage circuits.The included bulb is rated for 1.5 volts at 0.3 amps, making it suitable for small battery-powered experiments where you need a straightforward i...

SKU: SF-PRT-27882 · MPN: PRT-27882

This adapter lets you use new Alchitry V2 boards with older Alchitry V1 add-on boards. It is designed as a bridge between the updated V2 connector layout and the original V1-style add-on ecosystem.The board has the new style connectors on the bottom for the V2 board, and the old style connectors ...

SKU: SF-PRT-25464 · MPN: PRT-25464

This threaded hex standoff is a simple hardware spacer for mounting circuit boards, panels and small electronics assemblies.It is 0.750 in (19.05 mm) long between boards and tapped for a #4-40 screw, making it useful for lifting a PCB off a workbench or securing it inside an enclosure.Made from a...

SKU: SF-PRT-25233 · MPN: PRT-25233

This basic handheld enclosure is designed for building a comfortable, portable electronics project housing. Its rounded, ergonomic shape makes it suitable for instruments, controllers, sensor packs or other devices that need to be used in the hand.The enclosure is moulded from general purpose ABS...

SKU: SF-PRT-19797 · MPN: PRT-19797

Keep your Carbide Compact Router running with this replacement brush set. It is intended for users putting plenty of machining time on their router and needing service parts on hand.The set includes two replacement brushes, handy for maintaining your router so you can get back to cutting, carving...

SKU: SF-TOL-15038 · MPN: TOL-15038

This ER-11 collet and nut set lets you use larger tools with a 0.25" shank in your Nomad CNC machine.An extra collet nut is included, making it quicker to swap between collets without having to remove each collet from the nut first.Useful for Nomad users who want to expand their tooling options w...

SKU: SF-PRT-18704 · MPN: PRT-18704

This compact pure copper heatsink is designed to help draw heat away from small boards and ICs in tight electronics builds.The self-adhesive backing makes it straightforward to attach to a suitable flat component or board area without extra mounting hardware.Features:Self-adhesive: Designed for s...

SKU: SF-TOL-19767 · MPN: TOL-19767

These flat end mill cutters are suited to roughing operations and machining flat or prismatic parts on a compatible CNC mill.The pack includes two cutters, each with a 0.25" shank and 0.25" flute diameter. They are solid carbide tools with two flutes and no coating.If you are using these with a N...

SKU: SF-TOL-19768 · MPN: TOL-19768

These V-bit cutters are made for engraving intricate patterns and fine details, especially where a sharp 90° V profile is useful. They work well with the V-carve feature in Carbide Create for sign making, decorative engraving and detailed CNC work.Each pack includes two cutters. The bits use an H...

SKU: SF-TOL-19766 · MPN: TOL-19766

These flat end mills are made for roughing and machining flat or prismatic parts on a compatible CNC mill or router.Each pack includes two cutters, giving you a spare for workshop use or a matched pair for repeat jobs. The tools use a 0.125" shank and 0.125" flute diameter, making them suitable f...

SKU: SF-TOL-19769 · MPN: TOL-19769

These V-bit cutters are made for engraving intricate patterns and fine detail work, especially when using the V-carve feature in Carbide Create.The pack includes two cutters, giving you a spare on hand for CNC engraving and carving jobs.If you have, or are purchasing, a Nomad, make sure you also ...

SKU: SF-PRT-28388 · MPN: PRT-28388

This ground loop isolator is a simple inline fix for unwanted hum and noise caused by ground loops in audio setups. Place it between your audio board and the line-in of an amplifier or other compatible audio equipment.The unit is bi-directional, so either side can be used as the input or output. ...

SKU: AF-6026 · MPN: ADA6026

This strand puts tiny NeoPixel “pebbles” or “seeds” along solid plated wires, making it easier to add dots of colour to costumes, props, wearables and embedded structures than a flexible PCB strip that can crack when over-bent.Each soft plastic wire strand has a coated NeoPixel every 100mm / 4 in...

SKU: AF-6025 · MPN: ADA6025

Add tiny dots of colour to costumes, props, wearables and embedded builds without the stiffness of a normal flexible PCB strip. This NeoPixel strand uses solid plated wire that holds its shape, making it easier to sew over, cast into a structure, or work into soft materials.The strand is made fro...

SKU: AF-6023 · MPN: ADA6023

For wearable builds and sculptural lighting, this NeoPixel strand gives you lots of tiny RGB points without a flexible PCB to crack. Each coated NeoPixel sits on soft plastic-coated plated wire, so the strand can be shaped, sewn over, or embedded into costumes, props, castings and other structure...

SKU: AF-6024 · MPN: ADA6024

Add tiny points of addressable colour to costumes, props, wearables and embedded builds without fighting a fragile flexible PCB. This NeoPixel strand uses solid plated wire cords that hold their shape, making it easier to sew over, cast into a structure or route through a costume.The strand has a...

SKU: AF-2841 · MPN: ADA2841

Add individually addressable RGB plus white lighting to your project with this flexible NeoPixel strip. Each pixel combines red, green, blue and white elements, giving you colourful effects plus a dedicated white channel for brighter white tones.This version is a 1 metre strip with 60 LEDs per me...