All Products

SKU: SF-TOL-18472 · MPN: TOL-18472

These threaded inserts are a handy way to add strong, reusable fixing points to a jig, fixture or machine wasteboard. Place a few exactly where you need hold-down points, or install them in a grid pattern to turn a wasteboard into a threaded table.Installation is straightforward: create a 9mm pil...

SKU: SF-TOL-18471 · MPN: TOL-18471

These metric threaded inserts are handy for creating strong, reusable fixing points in jigs, fixtures, wasteboards and other work-holding setups.Install a few in strategic locations to clamp down material, or set them out in a grid pattern to turn a wasteboard into a threaded table. Installation ...

SKU: SF-TOL-15953 · MPN: TOL-15953

This ZrN coated single flute flat mill is made for roughing or machining flat and prismatic parts on a desktop CNC.It is a handy cutter for working with plastic and aluminium, and is a good fit for machines such as the Nomad or Shapeoko.If you are using it with a Nomad, make sure you have a compa...

SKU: SF-TOL-15950 · MPN: TOL-15950

This flat mill is made for roughing or machining flat and prismatic parts, giving you a straightforward cutter for CNC work where a flat-bottomed cut is required.It is suited to cutting plastic and aluminium, particularly on small CNC machines such as the Nomad or Shapeoko.If you are using a Shap...

SKU: SF-TOL-14857 · MPN: TOL-14857

This two pack of Carbide 3D flat mills is made for precision 3D machining and fabrication, especially when working with aluminium. Each cutter has a 0.125 inch cutting diameter and matching 0.125 inch shank diameter for use with compatible CNC machines and tool holders.The cutters are coated with...

SKU: SF-PGM-30117 · MPN: PGM-30117

This handheld tool configures REV Smart Robot Servos (SRS) and tests standard RC servos without needing a separate controller. It is built for quick setup at the bench, in the workshop or in a competition toolkit.For SRS units, it gives direct access to operating modes such as continuous rotation...

SKU: SF-PRT-28865 · MPN: PRT-28865

This mounting arm provides a stable platform for securing a rain gauge in a weather monitoring setup. It is the same arm supplied with SparkFun's Weather Meter Kit, making it useful as a replacement or spare for compatible installations.The arm is designed for straightforward installation on a me...

SKU: SF-KIT-27921 · MPN: KIT-27921

This all-in-one MyoWare 2 electromyography (EMG) kit gives you the essentials for measuring and visualising muscle activity. It is Arduino-compatible, but the included setup is designed to follow the standalone example from the MyoWare 2 Muscle Sensor Guide, so you can use it without a microcontr...

SKU: SF-PRT-28864 · MPN: PRT-28864

This two-piece metal mast set provides a sturdy and convenient mounting solution for your project.It is the same reliable mast included with SparkFun’s Weather Meter Kit, making it a handy replacement or spare when you need a simple mast for a compatible setup.Use it for projects that need a soli...

SKU: SF-PRT-28385 · MPN: PRT-28385

This is a simple single-row female header socket with 14 holes, suitable for standard 0.1 inch prototyping layouts.Use it for removable connections on perfboard, custom PCBs, breakout boards, shields or other maker projects that use 2.54 mm pitch headers.Specifications:Connector type: Female head...

SKU: SF-PRT-21505 · MPN: PRT-21505

This 12-position screw terminal block is a simple way to make secure wire connections on a PCB or prototyping board. Each position uses a screw clamp, making it handy for bringing external wiring into a circuit without soldering the wire directly to the board.The 3.5mm pitch is designed to line u...

SKU: SF-PRT-18246 · MPN: PRT-18246

Keep your high-precision GNSS gear organised and better protected in the field with this RTK kit carrying case. It is designed for transporting an RTK receiver and key accessories between survey, mapping, robotics, and positioning jobs.The interior has custom moulded slots for an RTK receiver, a ...

SKU: SF-SPX-21226 · MPN: SPX-21226

This handy kit gives you a simple way to compare and tune the brightness of your own LEDs, helping you avoid a project full of mismatched indicator lights. It was originally designed for side-by-side LED testing and is especially useful when choosing resistor values or learning how brightness cha...

SKU: SF-PRT-19756 · MPN: PRT-19756

Use these precision collets when you need to run .125" cutters in a Carbide Compact Router. They are intended as replacement collets for the standard Carbide Compact Router setup.The kit includes two collets: one for .25" tooling and one for .125" tooling, giving you the common sizes needed for c...

SKU: SF-TOL-18468 · MPN: TOL-18468

These low-profile stainless steel stops are designed for workholding on Nomad and Shapeoko CNC machines. Use them as hard stops to help locate and secure your job during milling.They are intended to work with Tiger Claw clamps, in either Standard or Compact versions, as well as Gator Tooth clamps...

SKU: SF-TOL-18467 · MPN: TOL-18467

These Lock Stops are low-profile stainless steel hard stops for CNC workholding on Nomad and Shapeoko machines.Use them together with Tiger Claw clamps, either Standard or Compact, or Gator Tooth clamps to help secure your workpiece firmly in place.The serrated face helps provide a tight grip, ma...

SKU: SF-PRT-19642 · MPN: PRT-19642

Keep your high-precision GNSS gear organised and better protected when you are working out in the field. This carrying case is designed for the RTK Facet kit and provides dedicated storage for the main receiver and common accessories.Custom moulded slots inside the case are shaped for the RTK Fac...

SKU: SF-WRL-19032 · MPN: WRL-19032

This Holybro SiK Telemetry Radio kit is a compact, lightweight open-source radio link for sending serial data over more than 300m out of the box. It is designed as a simple cable replacement for telemetry, RTK correction data (RTCM), MAVLink traffic, or basic serial output such as Serial.print() ...

SKU: SF-PRT-28765 · MPN: PRT-28765

This aluminium hex standoff is a compact threaded spacer for stacking and mounting small boards. It is 16.0mm long, measures 4.5mm across the flats, and is tapped through for an M2.5-0.45 screw.It is well suited to mounting pHATs onto Raspberry Pi boards, giving the add-on board a neat, supported...

SKU: SF-PRT-28863 · MPN: PRT-28863

This simple pair of screw clamps is handy for securing parts of your project during mounting, helping keep cables or assemblies neatly held in place.They are the same style of clamps supplied with the Weather Meter Kit, making them useful as replacements, spares, or for similar outdoor sensing an...